• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.155-169
• /
• 2002

The objective of this study was to investigate the effect of crack opening and closure in the AE activities during fatigue test. Laboratory experiment using various materials and test conditions were carried out to identify AE characteristics of fatigue crack propagation. Compact tension specimens of 2024-T4 and 6061-T6 aluminum alloy were prepared for fatigue test. AE activities were analyzed based on the phase of the loading cycle. Generally, most of AE were generated when the crack begins' opening and the crack closes fully, whereas a few in the pull opening of the crack. Also AE activity in the peak loading of cycle was different with each specimen. However, in the same material, AE activity was not affected by the change of cyclic frequency (0.1, 0.2, 1.0Hz). It was found that AE activities during crack opening and closure depend on material properties such as micro-structure, tensile strength and yield strength.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.631-639
• /
• 2013

Non-linear finite element analysis for newly developed precast concrete details for beam-to-column connection which can be used in moderate seismic region was carried out in this study. Developed precast system is based on composite structure and which have steel tube in column and steel plate in beam. Improving cracking strength of joint under reversed cyclic loading, joint area was casted with ECC (Engineering Cementitious Composites). Since this newly developed precast system have complex sectional properties and newly developed material, new analysis method should be developed. Using embedded elements and models of non-linear finite element analysis program ABAQUS previously tested specimens were successfully analyzed. Analysis results show comparatively accurate and conservative prediction. Using finite element model, effect of axial load magnitude and flexural strength ratio were investigated. Developed connection have optimized performance under axial load of 10~20% of compressive strength of column. Plastic hinge was successfully developed with flexural strength ratio greater than 1.2.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.517-528
• /
• 2013

The modular technology has been already applied in automotive industry, plant and shipbuilding industry. Recently, the modular technology was applied in bridge construction. The modular bridge is different from the existing precast bridges in terms of standardized design that the detailed design of members is omitted by using the standard modules; the design of the modular bridge is completed by only assembling the standard modules without design in member level. The girder-type precast modular bridge has been developed as a simply supported bridge. The girder-type precast modular bridge could be applied to the multi-span bridges through the continuity method. The continuity of the girder-type precast modular bridge is achieved by using the link slab which is easy to construction and appropriate to the rapid construction. The link slabs have been used as the type of reinforced concrete structure in US from the 1950's. In 2000's, the link slab using the engineered cementitious concrete (ECC link slab) has been developed. In this study, the RC type link slab which is more reproducible and economic relative to the ECC link slab was used for the continuity of the girder-type precast modular bridges, and the construction detail of RC type link slab was modified. In addition, the modified iterative design method of RC type link slab was proposed in this study. To verify the proposed design method, the flexural tests were conducted using the RC type link slab specimens. Also, the fatigue test using the mock-up specimen was conducted with cyclic loading condition up to two million cycles.

• Korean Journal of Adult Nursing
• /
• v.12 no.4
• /
• pp.690-705
• /
• 2000

This ethnography was based on Kleinman's explanatory model of a health care system. It is conducted to make thick discription of illness conception of the elderly in a sociocultural context. The basic assumptions were as follows. 1) A health care system is a cultural system, and as with any other cultural system, it is a system of symbolic meanings anchored in a particular arrangement of social institutions and patterns of interpersonal relationships; 2) In all societies health care activities are more or less interrelated. Therefore, they need to be in a holistic manner as socially organized responses to disease that constitute a special cultural system; health care system; 3) Health and illness experiences are the natural process of disease. Individuals who recognized a for state of health, their family, neighbors, and communities define the state, search for causes of the health problems, and response to it. According by, they proceed to search for healing stratagies. So, understanding of the illness experience is the starting point for health care. The study participants were 12 elders aged 60 or more. The fieldwork was conducted in an agricultural clan village of Namwon city. The data collection and analysis were cyclic, from descriptive observation, domain analysis, focused observation, taxanomic analysis, selected observation, componential analysis, and finally cultural themes were all analysed. Proxemic and text analysis techniques were used according to the characteristics of the data. The data of sociocultural context and descriptive data were collected from 1990 to 1992. Informations on illness concepts were collected during 1994 using focused observation. Data confirming and contrast observations were conducted from 1997 and 1999. Illness concepts of the elderly were taxonomized supernatural cause, non-supernatural cause, immediate cause, and ultimate cause. The supernatural ones were ancestors, god of home, god of village, and ghost such as 'sal(evil force of dead man)' and 'gagqui(ghost of begger)'. The non-supernatural ones were Ki, natural phenomenones, natural objects, foods, human and human behaviors. Immediate ones were insufficiency and overflows, discretion and consolidation, disorder and out of order, cloudness and contamination, and fluctuation and stagnation of supernatural cause and non-supernatural ones. Ultimate causes were intrusion and loss of supernatural and nonsupernatural ones. The cultural themes of illness concepts of the elderly are: 1) illness concepts are not based on causality principle, but on reciprocal principle; 2) illness concepts are affected by social level and charicteristics of the patients; 3) the causes of disease are recognized as imposed both positive and negative effects on health based on interpretation of the indiviuals; 4) illness concepts reflects on principles of everyday life of the society members such as hierachial structure and group cohesiveness; 5) illness concepts are ruled on principle of reciprocity and spread; 6) illness concepts are interrelated with physical environment of the participants. It can be concluded that the illness concepts of the elderly in a traditional clan village are a component of health care system as a cultural system based on these results. The these results can be a useful basis for gerontological nursing practice and education.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.527-533
• /
• 1991

Template condensation reactions of formaldehyde with appropriate tetramines and diamines in the presence of N(II) or Cu(II) ion produce square planar complexes of hexaaza macrotricyclic and macrotetracyclic ligands $[M(L)]^{2+}$(M = Ni(II) or Cu(II); L = 4-methyl-1,3,6,8,11,14-hexaazatricyclo[12,2,1,$1^{8,11}$]octadecane(C), 1,3,10,12,15,18-hexaazatetracyclo[16,2,1,$1^{12,15},0^{4,9}]$docosane(D) 4-methyl-1,3,6,8,12,15-hexaazatricyclo[13,3,1,$1^{8,12}$]eicosane(F), or 1,3,10,12,16,19-hexaazatetracyclo[l7,3,1,$1^{12,16},0^{4,9}]$tetracosane(G). These complexes contain two 1,3-diazacyclopentane or 1,3-diazacyclohexane rings in the six-membered chelate rings. The complexes of C and F contain one methyl group and those of D and G one cyclohexane ring in the five-membered chelate ring. Synthesis and characterization of the Ni(II) and Cu(II) complexes are presented. The effects of the ligand structure on the equilibrium $[Ni(L)]^{2+}2H_2O{\rightleftharpoons}[Ni(L)(H_2O)_2]^{2+}$ in aqueous solutions are described.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.543-553
• /
• 1996

Oxygen reduction in an alkaline fuel cell was studied by using perovskite type oxides as an oxygen electrode catalyst. The high surface area catalysts were prepared by malic acid method and had a formula of $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35 and 0.50). From the result of XRD pattern and specific surface area due to the amount of Fe substitution and the consumption of ammonia-water, the complex formation of Fe ion with $NH_3$ was the main factor for both the phase stability of perovskite and the increase of specific surface area. Multi-step calcination was necessary to give a single phase of perovskite in catalyst precursor. The crystal structure of the catalysts was simple cubic perovskite, which was verified from the XRD patterns of the catalysts. The activity of oxygen reduction was monitored by the techniques of cyclic voltammetry, static voltage-current method, and current interruption method. The activity(current density) of oxygen reduction showed its minimum at x=0.01 and its maximum between 0.20 and 0.35 of x-value in $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$. This tendency was independent of the change of surface area.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.15-22
• /
• 2013

By changing from ballasted track to concrete slab track, new type railroad subgrade is strongly required to satisfy strict regulations for displacement limitations of concrete slab track. In this study, sensitivity analysis was performed to assess the design characteristics of new type reinforced railroad subgrade, which could minimize residual settlement after track construction and maintain its function as a permanent railway roadbed under large cyclic load. With developed design program, the safety analysis (circular slip failure, overturning, and sliding) and the evaluation of internal forces developed in structural members (wall and reinforcement) were performed according to vertical installation spacing and stiffness of short and long geotextile reinforcement. Based on this study, we could evaluate the applicabilities of 0.4 H short geogrid length with 0.4 m vertical installation spacing of geotextile as reinforcement and what the ground conditions are for the reinforced railroad subgrade. And also, we could grasp design characteristics of the reinforced railroad subgrade, such as the importance of connecting structure between wall and reinforcement, boundary conditions allowing displacement at wall ends to minimize maximum bending moment of wall.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.379-388
• /
• 1991

We synthesized the binuclear Tetradentate Schiff base cobalt (II) complexes; [Co(II)$_2$(SMPD)$_2$(L)$_2$] and [Co(II)$_2$(SPPD)$_2$(L)$_2$] (where, SMPD: N,N'-bis(salicylaldehyde)-m-phenylenediimine, SPPD: N,N'-bis(salicylaldehyde)-p-phenylenediimine, L: Py, DMSO and DMF). We identified the binuclear structure of these complexes by elemental analysis, IR-spectrum, and T. G. A. According to the results of cyclic voltammetry and DPP measurements in aprotic solvents containing 0.1M TEAP as supporting electrolyte, it was found that diffusionally controlled redox process of two step for one electron was reversible or quasi reversible process in 0.1M TEAP-pyridine and 0.1M TEAP-DMSO solution at mononuclear complexes; [Co(II)(SOPD)(L)$_2$]. But, we knew that diffusionally controlled reduction processes of four steps with one electron for binuclear [Co(II)$_2$(SMPD)$_2$(L)$_2$] and [Co(II)$_2$(SPPD)$_2$(L)$_2$] complexes was Co(III)$_2\;{\longrightarrow^e}$ Co(III)Co(II) ${\longrightarrow^e}$ Co(II)$_2\;{\longrightarrow^e}$ Co(II)Co(I) ${\longrightarrow^e}$ Co(I)$_2$ in aprotic solvents.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.317-324
• /
• 1994

In this study, new preparation method of LiCoO$_{2}$ was applied to develop cathode active material for Li rechargeable cell, and followed by X-ray diffraction analysis, electrochemical properties and initial charge/discharge characteristics as function of current density. HC8A72- and CC9A24-LiCoO$_{2}$ were prepared by heating treatment of the mixture of LiOH H$_{2}$O/CoCO$_{3}$(1:1 mole ratio) and the mixture of Li$_{2}$CO$_{3}$/CoCO$_{3}$(1:2 mole ratio) at 850 and 900.deg. C, respectively. Two prepared LiCoO$_{2}$s were identified as same structure by X-ray diffraction analysis. a and c lattice constant were 2.816.angs. and 14.046.angs., respectively. The electrochemical potential of CFM-LiCoO$_{2}$(Cyprus Foote Mineral Co.'s product), HC8A72-LiCoO$_{2}$ and CC9A24 LiCoO$_{2}$ electrode were approximately between 3.32V and 3.42V vs. Li/Li reference electrode. Stable cycling behavior was obtained during the cyclic voltammetry of LiCoO$_{2}$ electrode. According as scan rate increases, cathodic capacity decreases, but redox coulombic efficiency was about 100% at potential range between 3.6V and 4.2V vs. Li/Li reference electrode. Cathodic capacity of HC8A72-LiCoO$_{2}$ was 32% higher than that of CFM-LiCoO$_{2}$ and that of CC9A24-LiCoO$_{2}$ was 47% lower than that of CFM-LiCoO$_{2}$ at 130th cycle in the condition of lmV/sec scan rate. Constant cur-rent charge/discharge characteristics of LiCoO$_{2}$/Li cell showed increasing Ah efficiency with initial charge/discharge cycle. Specific discharge capacities of CFM and HC8A72-LiCoO$_{2}$ cathode active materials were about 93mAh/g correspondent to 34% of theretical value, 110mAh/g correspondent to 40% of theretical value, respectively. In the view of reversibility, HC8A72-LiCoO$_{2}$ was also more excellent than CFM- and CC9A24-LiCoO$_{2}$.

• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.24-37
• /
• 1991

We synthesized the binuclear Tetradentate Schiff base nickel(II) and copper(II) complexes ; [Ni(II)$_2$(SMPO)$_2$(L)$_2$], [Ni(II)$_2$(SPPD)$_2$(L)$_2$] and [Cu(II)$_2$(SMPD)$_2$] and [Cu(II)$_2$(SPPD)$_2$] (where, L : Py, DMSO and DMF). We identified the structure of these complexes by elemental analysis, IR-spectrum, T.G.A, D.S.C and ESR measurements. According to the results of cyclic voltammetry and DPP measurements in aprotic solvent included 0.1M TEAP as supporting electrolyte, we knew that diffusional controlled redox process of one step with one electron was irreversible process in 0.1M TEAP-Py solution. Also it was reversible or quasi reversible process in 0.1M TEAP-DMSO solution and reversible or E.C reaction mechanism in 0.1M TEAP-DMF solution at mononuclear complexes ; [Cu(II)(SOPD)] and [Ni(II)(SOPD)(L)$_2$]. But, we knew that diffusional controlled redox process of two step for one electron of binuclear complexes was as follows. The values of redox potential for dimeric complexes in 0.1M TEAP-L solution (where, L ; Py, DMSO and DMF) with scan rate 100mV/sec.