• Title/Summary/Keyword: Cyclic Measurement

검색결과 250건 처리시간 0.065초

An Aptamer-Based Electrochemical Sensor That Can Distinguish Influenza Virus Subtype H1 from H5

  • Lee, Jin-Moo;Kim, JunWon;Ryu, Ilhwan;Woo, Hye-Min;Lee, Tae Gyun;Jung, Woong;Yim, Sanggyu;Jeong, Yong-Joo
    • Journal of Microbiology and Biotechnology
    • /
    • 제27권11호
    • /
    • pp.2037-2043
    • /
    • 2017
  • The surface protein hemagglutinin (HA) mediates the attachment of influenza virus to host cells containing sialic acid and thus facilitates viral infection. Therefore, HA is considered as a good target for the development of diagnostic tools for influenza virus. Previously, we reported the isolation of single-stranded aptamers that can distinguish influenza subtype H1 from H5. In this study, we describe a method for the selective electrical detection of H1 using the isolated aptamer as a molecular probe. After immobilization of the aptamer on Si wafer, enzyme-linked immunosorbent assay (ELISA) and field emission scanning electron microscopy (FE-SEM) showed that the immobilized aptamer bound specifically to the H1 subtype but not to the H5 subtype. Assessment by cyclic voltammetry (CV) also demonstrated that the immobilized aptamer on the indium thin oxide-coated surface was specifically bound to the H1 subtype only, which was consistent with the ELISA and FE-SEM results. Further measurement of CV using various amounts of H1 subtype provided the detection limit of the immobilized aptamer, which showed that a nanomolar scale of target protein was sufficient to produce the signal. These results indicated that the selected aptamer can be an effective probe for distinguishing the subtypes of influenza viruses by monitoring current changes.

Anti-Cyclic Citrullinated Peptide(Anti-CCP) 측정에 대한 연구 (A Study on the Measurement of Anti-Cyclic Citrullinated Peptide (Anti-CCP))

  • 서설
    • 대한임상검사과학회지
    • /
    • 제39권1호
    • /
    • pp.42-48
    • /
    • 2007
  • This study was carried out to review and evaluate anti-CCP ELISA assay for diagnostic in RA patients from an early arthritis clinic (EAC). The subjects were obtained from patients visiting the outpatient clinic of the Dept. of Rhumatology med.of P hospital in Daegu, during 6 months from July 1, 2006 to December 31, 2006. The subjects were 140 cases : 80 cases from RA patients (60 women and 20 men; mean age 58 years; range, 32-68 years) confirmed by clinical diagnostic. 39 cases of these RA patients were classified as having early RA (EAC). 50 cases (non-RA) did not fulfill the criteria for RA, and 10 cases were from healthy individuals. We performed the analysis with solid phase-ELISA method (ETI-max3000, Diasorin; Italy) for anti-CCP and Nephelometry assay (Roche/Hitachi 902 analyzer; USA) for RF. The results obtained were summarized as follows ; anti-CCP ELISA is more specific than RF Nephelometry assay (specificity 94% vs 90%) to diagnose RA patients with suspected EAC (early arthritis clinic). The combination test "anti-CCP and RF" had a very high specificity (specificity 98.3%, PPV; RA group 96%, EAC 95%), the difference was statistically significant (p<0.05). Anti-CCP ELISA had more sensitivity in EAC (Early arthritis clinic) patients than chronic RA patients (sensitivity 64% vs 24%, respectively), anti-CCP of RA group and EAC group was more specific than RF (anti-CCP PPV; 92%, 89% vs 89%, 81% respectively), the difference was statistically significant (p<0.05). The difference of antibody concetration between anti-CCP and RF for RA and the control group is statistically significant (p<0.05). In conclusion, anti-CCP ELISA testing may be useful if performed concomitantly with RF Nephelometry assay to diagnose RA patients with suspected EAC (early arthritis clinic).

  • PDF

그루브 조인트가 설치된 수계소화설비 입상배관계통의 지진거동분석을 위한 실험적 연구 (Experimental Study for Seismic Behavior Analysis of a Fire Protection Riser Pipe System with Groove Joints)

  • 김성완;윤다운;김재봉;전법규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권2호
    • /
    • pp.35-42
    • /
    • 2021
  • 본 연구에서는 NFPA 13을 참조하여 구조물 2층을 구현한 강재지그를 제작하였으며, 그루브 조인트의 배관연결재가 적용된 배관계통을 구성하고 정적 반복가력에 의한 지진모사실험을 수행하였다. 지진모사실험은 엑츄에이터로 건축물 내진설계기준의 최대허용 층간변위에 대한 반복가력실험을 수행하였다. 지진하중 발생 시 입상배관의 구조물에 대한 변형 또는 구조부재간의 상대변위에 의한 변위지배적인 거동에 따른 배관계통과 주요 배관요소의 지진거동을 분석하였다. 배관계통의 변형각은 기존의 센서를 이용하여 측정하기가 어려우므로 이미지측정시스템을 적용하였다.

재하-제하과정에서 발생하는 흙의 변형계수 및 포아송비의 특성 (Characteristics of Deformation Modulus and Poisson's Ratio of Soil by Unconfined Loading-Reloading Axial Compression Process)

  • 송창섭;김명환;김기범;박오현
    • 한국농공학회논문집
    • /
    • 제64권3호
    • /
    • pp.45-52
    • /
    • 2022
  • Prediction of soil behavior should be interpreted based on the level of axial strain in the actual ground. Recently numerical methods have been carried out focus on the state of soil failure. However considered the deformation of soil the prior to failure, mostly the small strain occurring in the elastic range is considered. As a result of calculating the deformation modulus to 50% of the maximum unconfined compression strength, Deformation modulus (E50) showed a tendency to increase according to the degree of compaction by region. The Poisson's ratio during loading-unloading was 0.63, which was higher than the literature value of 0.5. For the unconfined compression test under cyclic loading for the measurement of permanent strain, the maximum compression strength was divided into four step and the test was performed by load step. Changes in permanent strain and deformation modulus were checked by the loading-unloading test for each stage. At 90% compaction, the permanent deformation of the SM sample was 0.21 mm, 0.37 mm, 0.6 mm, and 1.35 mm. The SC samples were 0.1 mm, 0.17 mm, 0.42 mm, and 1.66 mm, and the ML samples were 0.48 mm, 0.95 mm, 1.30 mm, and 1.68 mm.

GS 283의 평활근 억제 작용기전 (Mechanisms Underlying the Inhibitory Effect of GS 283 in Various Smooth Muscles)

  • 김시환;이영수;정원석;장기철
    • 대한약리학회지
    • /
    • 제30권1호
    • /
    • pp.101-109
    • /
    • 1994
  • Tetrahydroisoquinoline유도체인 GS 283의 약리학적 특성을 흰쥐 흉부대동맥, 기니픽 결장띠 및 토끼 장간막 동맥 및 흰쥐 뇌를 사용하여 조사하였다. 혈관 평활근에서 GS283은 고 $K^+$에 의한 수축을 농도 의존적으로 억제하여 $Ca^{2+}$ 길항작용을 보였다. 또한 ${alpha}_1$- 수용체 자극에 의한 수축도 억제하였다. GS 283의 혈관이완 작용은 propranolol영향을 받지 않으므로 ${\beta}$-수용체 자극작용에 의한 것이 아니었다. 세포내 칼슘이온과 근장력 변화를 동시에 측정하였을 때 GS 283의 억제효과는 조직내 형광의 증가를 수반했다. 이 증가는 fura 2형광에 의한것이 아니라 내인성 pyridine nucleotide에 의한 것이며 이는 GS 283이 미토콘드리아 기능을 억제하는 효과가 있음을 시사했다. 흰쥐 뇌의 cAMP와 cGMP 의존성 phosphodiesterase에 대한 GS 283의 $K_i$,값은 2.5와 6.7mM이었다. 이상의 결과에서 GS 283의 약리 작용은 $Ca^{2+}$ 길항작용, ${\alpha}_1$- 수용체억제 작용 및 cyclic nucleotide 의존성 phosphodiesterase 억제 등 다양한 작용이 있으며 평활근 수축 억제에 대한 GS283 작용에는 $Ca^{2+}$ 길항이 가장 중요한 요인이 될 것으로 생각된다.

  • PDF

간단한 화학적 합성을 통한 고성능 슈퍼캐패시터용 수산화 구리 전극 (Facile Chemical Growth of Cu(OH)2 Thin Film Electrodes for High Performance Supercapacitors)

  • ;남민식;;전성찬
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제1권1호
    • /
    • pp.175-180
    • /
    • 2015
  • 본 연구에서는 간단한 화학적 합성 방법을 통하여 스테인레스 기판 위에 nano-bud 형태의 수산화 구리 박막을 형성하였다. 그리고 또 다른 합성 방법인 chemical bath deposition을 이용하여 수산화 구리 나노 구조를 간단하고 친환경적으로 형성하였다. 수산화 구리 박막의 구조적 연구는 X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) 방법을 통하여 이루어졌으며 다결정의 nano-bud 형상을 확인할 수 있었다. 또한 나노 구조로 합성된 수산화구리 전극의 전기화학적 측정은 1M KOH의 전해질 조건에서 cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD)에서 측정되었으며 $340Fg^{-1}$의 높은 비 용량을 보였다. 또한 $1mA\;cm^{-2}$ 의 전력 밀도에서 ${\sim}83Wh\;kg^{-1}$의 높은 에너지 밀도와 ${\sim}3.1kW\;kg^{-1}$의 높은 출력 밀도를 가지며 향상된 전극의 성능을 보였다. 이러한 뛰어난 의사 캐패시터의 성능은 수산화 구리의 nano-bud 형상에 의한 효과로 확인할 수 있었다. 본 연구를 통하여 화학적 합성 방법의 확장을 통하여 수산화 구리 전극의 에너지 저장 장치로써의 성능을 확인할 수 있었다.

구조용 알루미늄 합금에서의 피로균열 열림 및 닫힘 시 AE 발생특성 연구 (AE Characteristics of Fatigue Crack Opening and Closure in Structural Aluminum Alloy)

  • 정중채;박휘립;김기복;이승석;윤동진
    • 비파괴검사학회지
    • /
    • 제22권2호
    • /
    • pp.155-169
    • /
    • 2002
  • 피로균열 진전시 균열 열림 및 닫힘에 따른 음향방출 특성을 규명하고자 구조용 알루미늄 2024-T4 와 6061-T6 재료에 대해 소형인장 시편에서의 피로균열 진전시 발생되는 AE 특성을 관찰하였으며, 기존의 AE파라미터 분석은 물론 재료의 파단면 분석을 통해 재료특성에 따른 AE 발생거동 사이의 관계를 논의하였다. 대부분의 음향방출 신호는 균열이 열리기 시작하는 위상과 균열이 완전히 닫히는 위상에서 많이 발생되었으며 하중을 최대로 받는 균열 완전 열림에서는 전반적으로 적게 발생됨을 알 수 있었다. 또한 재료에 따라서 균열 완전 열렴 부분에서 발생하는 음향방출 특성은 달라졌으나 각 피로 사이클 주파수 변화 (0.1, 0.2, 1.0Hz)에 따른 결과에서는 통일 재료일 경우 피로 사이클 주파수가 변화하더라도 각 사이클에서의 AE hit 발생 경향용 비슷하게 나타났다. 이와 같은 결과로부터 균열 열림 및 닫힘시 재료 의 미세조직과 기계적 특성인 연장강도와 항복강도에 따라 AE 특성이 달라질 수 있음을 알 수 있었다.

전기저항측정 및 미세역학시험법을 이용한 탄소나노섬유/튜브 및 전기방사된 나노섬유/에폭시 복합재료의 계면특성 및 감지능 연구 (Interfacial Properties and Sensing of Carbon Nanofiber/Tube and Electrospun Nanofiber/Epoxy Composites Using Electrical Resistance Measurement and Micromechanical Technique)

  • 정진규;김성주;박종만
    • Composites Research
    • /
    • 제18권4호
    • /
    • pp.21-26
    • /
    • 2005
  • 탄소나노튜브 및 탄소나노섬유/에폭시 복합재료의 비파괴 손상감지능 및 응력전달 메카니즘이 전기-미세기계적 실험법을 통하여 조사되었다. 전기-미세기계적 실험법은 균일한 반복하중 하에서 전기저항을 측정함으로써 탄소나노복합재료의 감지반응을 평가하는 것이다. 큰 탄소섬유 부피 분율이 있는 복합재료가 에폭시 자체나 작은 부피 분율에 비하여 매우 큰 인장강도 특성을 보여주었다. 탄소나노섬유 복합재료는 제한된 온도범위 내에서 습도 감지능을 보여주었다. 형상비가 작은 탄소나노섬유 복합재료는 많이 첨가된 부피량에 기인하여 보다 큰 겉보기 탄성계수를 보여 주었다. 열처리된 전기 방사된 PVDF 나노섬유는 증대된 결정화에 기인하여 미처리의 경우보다 큰 기계적 특성을 보여 주었으며, 그 반면에 응력 감지능은 열처리의 경우에 감소를 보여 주었다. 전기 방사된 나노섬유는 또한 응력전달 뿐만 아니라 습도 및 온도에 대한 감지능도 나타내었다. 탄소나노튜브. 탄소나노섬유 및 전기 방사된 PVDF 나노섬유는 나노복합재료의 다기능에 응용할 수 있을 것이다.

암석 및 콘크리트의 압축변형거동과 미소파괴음 측정에 관한 연구 (A Study on the Measurement of Acoustic Emission and Deformation Behaviors of Rock and Concrete under Compression)

  • 심현진;이정인
    • 터널과지하공간
    • /
    • 제10권1호
    • /
    • pp.59-69
    • /
    • 2000
  • 암석 재료의 변형에 따른 미시적 파괴 현상으로부터 발생하는 미소파괴음(Acoustic Emission, AE)을 측정하여 암석 구조물 내의 미세균열의 생성과 전파를 탐지하는 연구는 지하 암반 구조물의 안정성을 비파괴검사로 평가하는데 대단히 중요하다. 본 연구에서는 암반 구조물의 보강재로 사용되는 콘크리트와 대리석 암석 시험관에 대하여 전과정 응력-변형률 곡선을 얻기 위한 강성압축시험을 실시하였고, 시험 중에 미소파괴음 발생을 측정하여 미소파괴음 파라미터 분석 및 음원추적을 수행하여 대리석과 콘크리트의 변형 및 파괴거동 특성을 살펴보았다. 또한 시험편에 계단식 반복재하시험을 수행하여 그 변형거동을 고찰하였으며, 미소파괴음 측정을 통하여 재료의 손상, 암반의 현지응력 및 콘크리트 구조물의 응력이력 등과 관련된 카이저효과를 검증하였다

  • PDF

다공성 Co3O4/RuO2 복합체 합성 및 전기화학적 특성 (Synthesis and Electrochemical Characterization of Porous Co3O4/RuO2 Composite)

  • 임혜민;류광선
    • 한국재료학회지
    • /
    • 제22권3호
    • /
    • pp.118-122
    • /
    • 2012
  • We synthesized porous $Co_3O_4/RuO_2$ composite using the soft template method. Cetyl trimethyl ammonium bromide (CTAB) was used to make micell as a cation surfactant. The precipitation of cobalt ion and ruthenium ion for making porosity in particles was induced by $OH^-$ ion. The porous $Co_3O_4/RuO_2$ composite was completely synthesiszed after anealing until $250^{\circ}C$ at $3^{\circ}C$/min. From the XRD ananysis, we were able to determine that the porous $Co_3O_4$/RuO2 composite was comprised of nanoparticles with low crystallinity. The shape or structure of the porous $Co_3O_4/RuO_2$ composite was studied by FE-SEM and FE-TEM. The size of the porous $Co_3O_4/RuO_2$ composite was 20~40 nm. From the FE-TEM, we were able to determine that porous cavities were formed in the composite particles. The electrochemical performance of the porous $Co_3O_4/RuO_2$ composite was measured by CV and charge-discharge methods. The specific capacitances, determined through cyclic voltammetry (CV) measurement, were ~51, ~47, ~42, and ~33 F/g at 5, 10, 20, and 50 mV/sec scan rates, respectively. The specific capacitance through charge-discharge measurement was ~63 F/g in the range of 0.0~1.0 V cutoff voltage and 50 mAh/g current density.