• Toxicological Research
• /
• v.23 no.1
• /
• pp.79-86
• /
• 2007

The isolated plantamajoside from Plantago asiatica that is often used as a marker compound in chemotaxonomic studies has various bioactivites such as the inhibitions of cyclic AMP phosphodi-esterase and 5-lipoxygenase, microbial growth and inflammation, and currently demands the generation of toxicity data. The purpose of this study was to examine the toxicities of the single and 14 days repeated dose toxicity in Sprague-Dawley rats orally administrated with plantamajoside at dose levels of 0, 500, 1000, and 2000 mg of dried material/kg body weight/day. The results showed that there was no difference in body weight change, food intake, water consumption, or relative organ weight among different dose groups. Also we observed no death and abnormal clinical signs were observed during the experimental period. Between the groups orally administered Plantago asiatica and the control group, there was no statistical significance in hematological test or serum biochemical values. There were no gross findings at final sacrifice. There was no evidence of histopathological alteration mediated by 14 days treatment with Plantago asiatica. These results suggest that no observed adverse effect level (NOAEL) of the oral application was considered to be more than 2000 mg/kg in rats under the conditions employed in this study. Another observation was performed to investigate the safety of Plantago asiatica in respect of genotoxicity. This substance was examined that Salmonella typhimurium reversion assay (Ames test) in strain TA98, TA100, TA1535. In the reverse mutation test, Plantago asiatica did not induce mutagenicity in Samonella typhimurium with and without metabolic activation. These results indicated that Plantago asiatica had no genotoxicity.

• The Korean Journal of Zoology
• /
• v.29 no.3
• /
• pp.201-207
• /
• 1986

The authors attempted to investigate the oxygen consumption rate of sexuals in the water-striders, Gerris paludum insuralis, at four temperature groups of 25, 30, 35 and $40^\\circ C$ in a series of studies on respiration of a heminetabolous insects. THe results are summarised as follows: (1) At $30^\\circ C$, the change of oxygen consumption rate according to the lapse of time was small in comparison with the other three temperature groups which shows a cyclic decreasing pattern. The rate during initial and final 5 minutes was much alike. Thereupon, the optimum temperature was regarded as $30^\\circ C$. (2) The oxygen consumption rate of male was higher than that of female. (3) The oxygen consumption rates at 25, 30, 35 and $40^\\circ C$ were 0.42, 0.49, 0.79 and 1.11 $\\mu$l/mg/h respectively. That is, the rate was increased as the temperature was increased. (4) The $Q_10$ of male showed a high value in the lower temperature interval ($25^\\circ C \\sim 35^\\circ C$), but the female showed a high value in the higher temperature interval ($30^\\circ C \\sim 40^\\circ C$). The mean $Q_10$ was 2.12. (5) The respiratory rate was decreased as the body weight was increased in the above fresh weight of 10mg and dry weight 5 mg. (6) The upper temperature threshold for respiration was $48.31^\\circ C$ and the lower temperature threshold was $17.68^\\circ C$. (7) The ceasing time of breathing at the other three temperature groups except $30^\\circ C$ was infered to be about 110 minutes after the start of experiment.

• Journal of Powder Materials
• /
• v.13 no.5 s.58
• /
• pp.327-335
• /
• 2006

In the development of new hydrogen absorbing materials for a next generation of metal hydride electrodes for rechargeable batteries, metastable Mg-Ni-based compounds find currently special attention. Amor phous-nanocrystalline $Mg_{63}Ni_{30}Y_7$ and $Mg_{50}Ni_{30}Y_{20}$ alloys were produced by mechanical alloying and melt-spinning and characterized by means of XRD, TEM and DSC. On basis of mechanically alloyed Mg-Ni-Y powders, complex hydride electrodes were fabricated and their electrochemical behaviour in 6M KOH (pH=14,8) was investigated. The electrodes made from $Mg_{63}Ni_{30}Y_7$ powders, which were prepared under use of a SPEX shaker mill, with a major fraction of nanocrystalline phase reveal a higher electrochemical activity far hydrogen reduction and a higher maximum discharge capacity (247 mAh/g) than the electrodes from alloy powder with predominantly amorphous microstructure (216 mAh/g) obtained when using a Retsch planetary ball mill at low temperatures. Those discharge capacities are higher that those fur nanocrystalline $Mg_2Ni$ electrodes. However, the cyclic stability of those alloy powder electrodes was low. Therefore, fundamental stability studies were performed on $Mg_{63}Ni_{30}Y_7$ and $Mg_{50}Ni_{30}Y_{20}$ ribbon samples in the as-quenched state and after cathodic hydrogen charging by means of anodic and cathodic polarisation measurements. Gradual oxidation and dissolution of nickel governs the anodic behaviour before a passive state is attained. A stabilizing effect of higher fractions of yttrium in the alloy on the passivation was detected. During the cathodic hydrogen charging process the alloys exhibit a change in the surface state chemistry, i.e. an enrichment of nickel-species, causing preferential oxidation and dissolution during subsequent anodization. The effect of chemical pre-treatments in 1% HF and in $10\;mg/l\;YCl_3/1%\;H_2O_2$ solution on the surface degradation processes was investigated. A HF treatment can improve their anodic passivation behavior by inhibiting a preferential nickel oxidation-dissolution at low polarisation, whereas a $YCl_3/H_2O_2$ treatment has the opposite effect. Both pre-treatment methods lead to an enhancement of cathodically induced surface degradation processes.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.283-294
• /
• 2004

New BV RI photometric observations of the contact binary AH Tau were performed with the 61 cm reflector and a 2K CCD camera at the Sobaeksan Optical Astronomy Observatory during seven nights from September to December, 2001. A total of 144 times of minima observed up to date, including three times of minima obtained from our observation, were analyzed. It is found that the orbital period of AH Tau has varied in a cyclic way superposed on a secular period decrease. The rate of the secular period decrease is calculated to be $1^s$ .04 per century, implying that a mass of about $3.8{\times}10^{-8}M{\odot}/yr$ from the more massive primary flows into the secondary if a conservative mass transfer is assumed. Assuming that the sinusoidal period variation is produced by a light-time effect due to an unseen third body, the resultant semi-amplitude, period, and eccentricity for the deduced light-time orbit are obtained as 35.4 years, 0.014 day and 0.52, respectively. The mass of the third-body is calculated as a tout $0.24M{\odot}$ when the third body is assumed to be coplanar with AH Tau system.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.399-405
• /
• 2001

Poly[3-octylthiophene-co-3-(4-fluorophenyl)thiophene]s were synthesized in 2:1, 1:1, and 1:2 mole ratios, and organic electroluminescent devices were fabricated using the copolymers. The opto-electrical properties of the copolymers were studied by PL, EL spectra, I-V, and V-L curves of the organic electroluminescent devices in conjunction with the energy band diagrams which were obtained from the cyclic voltammogram and the electronic absorption spectra. The LUMO energy level of P(OT/FPT)(1:1) is the lowest as -3.35 eV. In the copolymers P(OT/FPT)(2:1) and P(OT/FPT)(1:1) the ${\lambada}_{max}$ in the PL and EL spectra red-shifted as the mole ratio of fluorophenyl group increased while in P(OT/FPT)(1:2) it showed a blue-shift. This indicates that the backbone chain is twisted due to the steric hinderance of the fluorophenyl group leading to shorter ${\pi}$-conjugation length. P(OT/FPT)(1:1) showed the highest EL intensity and the highest power efficiency among the three copolymers. In P(OT/FPT)(1:2) the roughness of the film surface causes unusually high local leakage current leading to the low efficiency of electroluminescence.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2006

The phase-shift method for determining the Langmuir, Frumkin, and Temkin adsorption isotherms ($\theta_H\;vs.\;E$) of H for the cathodic $H_2$ evolution reaction (HER) at a Pt/0.1 M KOH solution interface has been proposed and verified using cyclic voltammetric, differential pulse voltammetric, and electrochemical impedance techniques. At the Pt/0.1 M KOH solution interface, the Langmuir and Temkin adsorption isotherms ($\theta_H\;vs.\;E$), the equilibrium constants ($K_H=2.9X10^{-4}mol^{-1}$ for the Langmuir and $K_H=2.9X10^{-3}\exp(-4.6\theta_H)mol^{-1}$ for the Temkin adsorption isotherm), the interaction parameters (g=0 far the Langmuir and g=4.6 for the Temkin adsorption isotherm), the rate of change of the standard free energy of $\theta_H\;with\;\theta_H$ (r=11.4 kJ $mol^{-1}$ for g=4.6), and the standard free energies (${\Delta}G_{ads}^{\circ}=20.2kJ\;mol^{-1}$ for $k_H=2.9\times10^{-4}mol^{-1}$, i.e., the Langmuir adsorption isotherm, and $16.7<{\Delta}G_\theta^{\circ}<23.6kJ\;mol^{-1}$ for $K_H=2.9\times10^{-3}\exp(-4.6\theta_H)mol^{-1}$ and $0.2<\theta_H<0.8$, i.e., the Temkin adsorption isotherm) of H for the cathodic HER are determined using the phase-shift method. At intermediate values of $\theta_H$, i.e., $0.2<\theta_H<0.8$, the Temkin adsorption isotherm ($\theta_H\;vs.\;E$) corresponding to the Langmuir adsorption isotherm ($\theta_H\;vs.\;E$), and vice versa, is readily determined using the constant conversion factors. The phase-shift method and constant conversion factors are useful and effective for determining the Langmuir, Frumkin, and Temkin adsorption isotherms of intermediates for sequential reactions and related electrode kinetic and thermodynamic data at electrode catalyst interfaces.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.3
• /
• pp.332-341
• /
• 2007

The purpose of this study was to investigate the change of flavor compounds of freeze-dried garlic and garlic roasted with soybean oil and sesame oil. Freeze-dried garlic and ground raw garlic roasted with oils was prepared at $180^{\circ}C$ for 5 minutes. Volatile compounds of garlic samples were obtained by Likens-Nickerson distillation/solvent extraction and identified by GC and GC/MS. Sulfur compounds, methyl allyl sulfide, diallyl sulfide, methyl allyl disulfide, dimethyl trisulfide, diallyl disulfide, methyl allyl trisulfide and diallyl trisulfide were the major volatile in garlic flavor which was more than 98% of the total volatile compounds. The total amount of sulfur compounds in freeze-dried garlic roasted with soybean oil was decreased to 20% compare to that of garlic flavor; however, 10 pyrazines such as 2-methyl pyrazine, 2,6-dimethyl pyrazine, 2-ethyl-5-methyl pyrazin and 3-ethyl-2,5-dimethyl pyrazine which were not originated from both freeze-dried garlic and soybean oil were identified. They might be generated from thermal interactions of sugars and nonvolatile flavor precursors of garlic. In freeze-dried garlic roasted with sesame oil, the amount of diallyl sulfide, methyl allyl disulfide, dimethyl trisulfide increased whereas diallyl disulfide completely disappeared. The amount of two cyclic compounds 3,4-dihydro-3-vinyl-1,2-dithiin and 2-vinyl-4H-1,3-dithiin, which were artifacts from allicin, increased in roasted garlic with sesame oil.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.314-319
• /
• 1972

N-Methyl-p-aminophenol was polymerized by oxidative couplng in the aqueous iron chelate solution in the presence of oxygen, and black precipitate of oligo-(N-methyl-p-aminophenol) was formed quantitatively. In this oxidative polymerization reaction, methyl group attached to N in the monomer was partly eliminated, and it was clarified by the infrared spectra from the fact that the absorption of ${\delta}\;asym\;CH_3\;1460\;cm^{-1}$ and ${\delta}\;sym\;CH_3\;1380\;cm^{-1}$ in acetone insoluble fraction was much weaker than that in acetone soluble fraction. From Thermo-gravimetric analysis, oligo-(N-methyl-p-aminophenol) showed about 40% weight loss at $600^{\circ}C$ and it was less heat-resistant than oligo (p-aminophenol) that methyl group was not contained. In pyrolysis of oligo-(N-methyl-p-aminophenol) in He atmosphere, monomer N-methyl-p-aminophenol and water were formed, and in the pyrolytic gases, $H_2,\;CO,\;CO_2$ were detected by gas chromatography. From the above facts, to the structural change on oligo-(N-methyl-p-aminophenol) when it was heat-treated, it was considered that original linear structure was partly degraded, and the most of the oligomer was to go in with melt polycondensation to form polymer, and heat-resistant cyclic structure was formed at a time.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.155-169
• /
• 2002

The objective of this study was to investigate the effect of crack opening and closure in the AE activities during fatigue test. Laboratory experiment using various materials and test conditions were carried out to identify AE characteristics of fatigue crack propagation. Compact tension specimens of 2024-T4 and 6061-T6 aluminum alloy were prepared for fatigue test. AE activities were analyzed based on the phase of the loading cycle. Generally, most of AE were generated when the crack begins' opening and the crack closes fully, whereas a few in the pull opening of the crack. Also AE activity in the peak loading of cycle was different with each specimen. However, in the same material, AE activity was not affected by the change of cyclic frequency (0.1, 0.2, 1.0Hz). It was found that AE activities during crack opening and closure depend on material properties such as micro-structure, tensile strength and yield strength.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.411-422
• /
• 2010

Self-sensing on micro-failure, dispersion degree and relating properties, of carbon nanotube(CNT)/epoxy composites, were investigated using wettability, electro-micromechanical technique with acoustic emission(AE). Specimens were prepared from neat epoxy as well as composites with untreated and acid-treated CNT. Degree of dispersion was evaluated comparatively by measuring volumetric electrical resistivity and its standard deviation. Apparent modulus containing the stress transfer was higher for acid-treated CNT composite than for the untreated case. Applied cyclic loading responded well for a single carbon fiber/CNT-epoxy composite by the change in contact resistivity. The interfacial shear strength between a single carbon fiber and CNT-epoxy, determined in a fiber pullout test, was lower than that between a single carbon fiber and neat epoxy. Regarding on micro-damage sensing using electrical resistivity measurement with AE, the stepwise increment in electrical resistivity was observed for a single carbon fiber/CNT -epoxy composite. On the other hand, electrical resistivity increased infinitely right after the first carbon fiber breaks for a single carbon fiber/neat epoxy composite. The occurrence of AE events of added CNT composites was much higher than the neat epoxy case, due to micro failure at the interfaces by added CNTs.