• Clinical and Experimental Reproductive Medicine
• /
• v.31 no.4
• /
• pp.253-260
• /
• 2004

Objectives: Klinefelter syndrome is the most common genetic cause of male infertility and presents with 47, XXY mainly or 46, XX/47, XXY mosaicism. It is characterized by hypogonadism and azoospermia due to testicular failure, however, sporadic cases of natural pregnancies have been reported. With the development of testicular sperm extraction (TESE) and intracytoplasmic sperm injection (ICSI), sperm can be retrieved successfully and ART is applied in these patients for pregnancy. It has been suggested that the risk of chromosome aneuploidy for both sex chromosome and autosome is increased in the sperms from 47, XXY germ cells. Considering the risk for chromosomal aneuploidy in the offspring, preimplantation genetic diagnosis (PGD) could be applied as a safe and more effective treatment option in Klinefelter syndrome. The aim of this study is to assess the outcome of PGD cycles by using FISH for sex chromosome and autosome in patients with Klinefelter syndrome. Materials and Methods: From Jan. 2001 to Dec. 2003, PGD was attempted in 8 cases of Klinefelter syndrome but TESE was failed to retrieve sperm in the 3 cases, therefore PGD was performed in 8 cycles of 5 cases (four 47, XXY and one 46, XY/47, XXY mosaicism). In one case, ejaculated sperm was used and in 4 cases, TESE sperm was used for ICSI. After fertilization, blastomere biopsy was performed in $6{\sim}7$ cell stage embryo and the chromosome aneuploidy was diagnosed by using FISH with CEP probes for chromosome X, Y and 17 or 18. Results: A total of 127 oocytes were retrieved and ICSI was performed in 113 mature oocytes. The fertilization rate was $65.3{\pm}6.0%$ (mean$\pm$SEM) and 76 embryos were obtained. Blastomere biopsy was performed in 61 developing embryos and FISH analysis was successful in 95.1% of the biopsied blastomeres (58/61). The rate of balanced embryos for chromosome X, Y and 17 or 18 was $39.7{\pm}6.9%$. The rate of aneuploidy for sex chromosome (X and Y) was $45.9{\pm}5.3%$ and $43.2{\pm}5.8%$ for chromosome 17 or 18, respectively. Embryo transfer was performed in all 8 cycles and mean number of transferred embryos was $2.5{\pm}0.5$. In 2 cases, clinical pregnancies were obtained and normal 46, XX and 46, XY karyotypes were confirmed by amniocentesis, respectively. Healthy male and female babies were delivered uneventfully at term. Conclusion: The patients with Klinefelter syndrome can benefit from ART with TESE and ICSI. Considering the risk of aneuploidy for both sex chromosome and autosome in the sperms and embryos of Klinefelter syndrome, PGD could be offered as safe and more effective treatment option.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.230-236
• /
• 2006

$\underline{Purpose}$: To analyze the response, toxicity, patterns of failure and survival rate of patients with locally advanced non-small cell lung cancer who were treated with concurrent chemoradiotherapy with weekly paclitaxel. $\underline{Materials\;and\;Methods}$: Twenty-three patients with locally advanced non-small cell lung cancer patients who received radical chemoradiotherapy from October 1999 to September 2004 were included in this retrospective study. Patients received total $55.4{\sim}64.8$ (median 64.8) Gy (daily 1.8 Gy per fraction, 5 days per weeks) over $7{\sim}8$ weeks. 50 or $60\;mg/m^2$ of paclitaxel was administered on day 1, 8, 15, 22, 29 and 36 of radiotherapy. Four weeks after the concurrent chemoradiotherapy, three cycles of consolidation chemotherapy consisted of paclitaxel $135\;mg/m^2$ and cisplatin $75\;mg/m^2$ was administered every 3 weeks. $\underline{Results}$: Of the 23 patients, 3 patients refused to receive the treatment during the concurrent chemoradiotherapy. One patient died of bacterial pneumonia during the concurrent chemoradiotherapy. Grade 2 radiation esophagitis was observed in 4 patients (17%). Sixteen patients received consolidation chemotherapy. During the consolidation chemotherapy, 8 patients (50%) experienced grade 3 or 4 neutropenia and one of those patients died of neutropenic sepsis. Overall response rate for 20 evaluable patients was 90% including 4 complete responses (20%) and 14 partial responses (70%). Among 18 responders, 9 had local failure, 3 had local and distant failure and 2 had distant failure only. Median progression-free survival time was 9.5 months and 2-year progression-free survival rate was 19%. Eleven patients received second-line or third-line chemotherapy after the treatment failure. The median overall survival time was 21 months. 2-year and 5-year survival rate were 43% and 33%, respectively. Age, performance status, tumor size were significant prognostic factors for progression-free survival. $\underline{Conclusion}$: Concurrent chemoradiotherapy with weekly paclitaxel revealed high response rate and low toxicity rate. But local failure occurred frequently after the remission and large tumor size was a poor prognostic factor. Further investigations are needed to improve the local control.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.221-227
• /
• 2002

Purpose : To evaluate the role of postoperative chemoradiotherapy in locally advanced rectal cancer, we retrospectively analyzed the treatment results of patients treated by curative surgical resection and postoperative chemoradiotherapy. Materials and Methods : From April 1989 through December 1998, 119 patients were treated with curative surgery and postoperative chemoradiotherapy for rectal carcinoma in Gyeongsang National University Hospital. Patient age ranged from 32 to 73 years, with a median age of 56 years. Low anterior resection was peformed in 59 patients, and abdominoperineal resection in 60. Forty-three patients were AJCC stage II and 76 were stage III. Radiation was delivered with 6 MV X rays using either AP-PA two fields, AP-PA both lateral four fields, or PA both lateral three fields. Total radiation dose ranged from 40 Gy to 56 Gy. In 73 patients, bolus infusions of 5-FU $(400\;mg/m^2)$ were given during the first and fourth weeks of radiotherapy. After completion of radiotherapy, an additional four to six cycles of 5-FU were given. Oral 5-FU (Furtulone) was given for nine months in 46 patients. Results : Forty $(33.7\%)$ of the 119 patients showed treatment failure. Local failure occurred in 16 $(13.5\%)$ patients, 1 $(2.3\%)$ of 43 stage II patients and 15 $(19.7\%)$ of 76 stage III patients. Distant failure occurred in 31 $(26.1\%)$ patients, among whom 5 $(11.6\%)$ were stage II and 26 $(34.2\%)$ were stage III. Five-year actuarial survival was $56.2\%$ overall, $71.1\%$ in stage II patients and $49.1\%$ in stage III patients (p=0.0008). Five-year disease free survival was $53.3\%$ overall, $68.1\%$ in stage II and $45.8\%$ in stage III (p=0.0006). Multivariate analysis showed that T stage and N stage were significant prognostic factors for five year survival, and that T stage, N stage, and preoperative CEA value were significant prognostic factors for five year disease free survival. Bowel complication occurred in 22 patients, and was treated surgically in 15 $(12.6\%)$, and conservatively in 7 $(5.9\%)$. Conclusion : Postoperative chemoradiotherapy was confirmed to be an effective modality for local control of rectal cancer, but the distant failure rate remained high. More effective modalities should be investigated to lower the distant failure rate.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.222-235
• /
• 2007

The objectives of this study was to evaluate the effect of thermocycling on the ${\mu}TBS$ (microtensile bond strength) to dentin with four different adhesive systems to examine the bonding durability. Freshly extracted $3^{rd}$ molar teeth were exposed occlusal dentin surfaces, and randomly distributed into 8 adhesive groups 3-steps total-etching (Scotchbond Multi-Purpose Plus; SM, All Bond-2; AB), 2-steps total-etching (Single Bond; SB, One Step plus; OS), 2-steps self-etching (Clearfil SE Bond; SE, AdheSE AD) and single-step self-etching systems (Promp L-Pop; PL, Xeno III; XE) Each adhesive system in 8 adhesives groups was applied on prepared dentin surface as an instruction and resin composite (Z250) was placed incrementally and light-cured. The bonded specimens were sectioned with low-speed diamond saw to obtain $1\times1mm$ sticks after 24 hours of storage at $37^{\circ}C$ distilled water and proceeded thermocycling at the pre-determined cycles of 0, 1,000 and 2,000. The ${\mu}TBS$ test was carried out with EZ-tester at 1mm/min. The results of bond strength test were statistically analyzed using one-way ANOVA/ Duncan's test at the a < 0.05 confidence level. Also, the fracture mode of debonded surface and the interface were examined under SEM. The results of this study were as follows ; 1. 3-step total etching adhesives showed stable, but bond strength of 2-step adhesives were decreased as thermocycling stress. 2. SE showed the highest bond strength, but single step adhesives (PL, XE) had the lowest value both before and after thermocycling. 3 Most of adhesives showed adhesive failure. The total-etching systems were prone to adhesive failure and the single-step systems were mixed failure after thermocycling. Within limited results of this study, the bond strength of adhesive system was material specific and the bonding durability was affected by the bonding step/ procedure of adhesive Simplified bonding procedures do not necessarily imply improved bonding performance.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.167-177
• /
• 1997

Oocyte donation program developed to reach the pregnancy in those patients suffering from premature ovarian failure or surgery induced menopause, particularly in their reproductive age. With technical advances and popularity of ART (assisted reproductive technology), the indication of oocyte donation program extended to low responders, and even to naturally menopaused patients that has led them quite successfully to getting in pregnancy. The purpose of this study was to evaluate which one is involved in the decline of fertility between the oocyte and uterine factor. One hundred five cycles of oocyte donation program were performed in 84 patients from Jan., 1993 to Dec., 1996. Oocytes were donated from healthy, young, fertile anonymous donors or relatives or infertile patients with supernumerary oocytes. The study population was divided into 3 groups according to the age of recipients. Group 1 was less than 35 years old, Group 2 was between 35 to 39 years old, and Group 3 was more than 39 years old. The results were as follows: The mean age of oocyte donor was $31.5{\pm}3.3$ (range; 25-36). The mean concentration of basal serum FSH and peak serum estradiol were not different among groups. The mean number of oocytes retrieved from donors, embryos transferred to recipients, and fertilization rate were not different among groups. The clinical pregnancy rate was 37.3% in Group 1, 31.6% in Group 2, and 31.6% in Group 3, respectively. The spontaneous abortion rate was 16.0% in Group 1, 16.7% in Group 2, and 16.7 in Group 3, respectively. The multiple pregnancy rate was 20.0% in Group 1, 16.7% in Group 2, 16,7% in Group 3, respectively, The implantation rate was 11.3% in Group 1, 10.3% in Group 2 and 10.0% in Group 3, respectively. All of the pregnancy outcomes were not different statistically among groups. In conclusion, endometrial receptivity does not seem to be impaired as age increases with transfer of good quality embryos and adequate endometrial preparation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.369-378
• /
• 2003

Statement of Problem: Recently, resin cements have become more widely used and have been accepted as prominent luting cements. Current resin cements exhibit less microleakage than conventional luting cements. However, the constant contact with water and exposure to occlusal forces increase microleakage even in resin cements inevitably. Most bonding resins have been modified to contain a hydrophilic resin such as 2-hydroxyethylmethacrylate (HEMA) to overcome some of the problems associated with the hydrophobic nature of bonding resins. By virtue of these modifications, bonding resins absorb a significant amount of water, and there may also be significant stresses at bonding interfaces, which may adversely affect the longevity of restorations. Therefore the reinforcement of water stability of resin cement is indispensable in future study. Purpose: This study was conducted to examine the influence of water retention on microleakage of two resin cements over the period of 6 months. Materials and Methods: 32 extracted human teeth were used to test the microleakage of a single full veneer crown. Two resin cements with different components and adhesive properties - Panavia F (Kuraray Co., Osaka, Japan) and Super-Bond C&B (Sun Medical Co., Kyoto, Japan)- were investigated. The storage medium was the physiological saline solution changed every week for 1 month, 3 months, and 6 months. One group was tested after storage for 1 day. At the end of the each storage period, all specimens were exposed to thermocycling from $5^{\circ}C$ to $55^{\circ}C$ of 500 cycles and chewing simulation of 50,000 cycles, and then stained with 50% silver nitrate solution. The linear penetration of microleakage was measured using a stereoscopic microscope at ${\times}40$ magnification and a digital traveling micrometer with an accuracy of ${\pm}3{\mu}m$. Values were analyzed using two-way ANOVA test, Duncan's multiple range tests (DMRT). Results : Statistically significant difference of microleakage was shown in the 3-month group compared with the1-day or 1-month group in both systems (p<0.05) and there were statistically significant differences in microleakage between the 3-month group and the 6-month group in both systems (p<0.05). The two systems showed different tendency in the course of increased microleakage during 3 months. In Panavia F, microleakage increased slowly throughout the periods. In Super-Bond C&B, there was no significant increase of microleakage for 1 month, but there was statistically significant increase of microleakage for the next 2 months. For the mean microleakage for each period, in the 3-month group, microleakage of Super-Bond C&B was significantly greater than that of Panavia F. On the other hand, in the 6-month group, microleakage of Panavia F was significantly greater than that of Super-Bond C&B (p<0.05). Conclusion: Within the limitation of this study, water retention of two different bonding systems influence microleakage of resin cements. Further studies with the longer observation periods in viro are required in order to investigate water stability and the bonding durability of the resin cement. CLINICAL IMPLICATIONS Microleakage at the Cement-tooth interfaces did not necessarily result in the failure of the crowns. But it is considered to be a major factor influening the longerity of restorations. Further clinical approaches for decreasing the amount of microleakage are required.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.17-24
• /
• 2003

One of the reasons for brittle failure in reinforced concrete structures subjected to severe earthquake is due to large local bond-slippage of bars resulting in fast bond degradation between reinforcing bars and concrete. This study aims to evaluate effects of bar deformation height on bond performance, specially, bond degradation under cyclic loading. Bond test specimens were constructed with machined bars with high relative rib areas. The degree of confinement by transverse bars is also another key parameters in this bond test. From test results, amounts of energy dissipation are calculated and compared for each parameter. Test results show that bond strength and stiffness drops significantly as cycles increases. The confinement and high relative rib area are effective to delay bond degradation, as the reduction of bond strength of cyclic loading compared to monotonic loading decreased for bars with large confinement and high relative rib areas. The energy dissipation also increases as the degree of confinement and relative rib area increases. However, tested bars with very high rib areas show that the bond may be damaged at relatively small slip because of high stiffness. The study will help to understand the bond degradation mechanism due to bar deformation height under cyclic loading and be useful to develop new deformed bars with high relative rib areas.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.497-507
• /
• 2024

In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

• Korean Journal of Head & Neck Oncology
• /
• v.16 no.1
• /
• pp.33-36
• /
• 2000

Objectives: Angiocentric T-cell lymphoma of the head and neck is an angiocentric and angiodestructive lymphoreticular proliferative disorder. It has been treated with various treatment modalities, but its prognosis is poor and the treatment modality is controversial. We performed this study to suggest a treatment modality with improved results. Materials and Methods: We studied 40 cases of pathologically confirmed angiocentric T-cell lymphoma from July 1984 to December 1996, 35 cases of which showed complete response after initial treatment. All the patients were divided into two groups according to treatment modality. 15 cases received radiotherapy alone (Group I) and 20 cases received radiotherapy after five cycles of CHOP-Bleo chemotherapy(Group II). We analyzed the subsites of tumor, stage, treatment modality and treatment outcome and causes of failure for each group, and compared the three-year no evidence of disease(NED) between the two groups. Results: The three-year NED of a combined chemoradiotherapy was higher than that of a radiotherapy alone (p=0.0478). The three-year NED according to groups and stage were as follows: Group I=6/15(40.0%), stage IE=5/10(50.0%), stage IIE=1/5(20%), Group II=13/20(65.0%), stage IE=9/13(69.2%), stage IIE=4/7(57.1%). Radiotherapy alone is not well effective for the nasal cavity lymphoma extended to paranasal sinus and the palate. Conclusion: We are unable to provide clear guidelines for treatment, but recommend the initial treatment with oral alkylating agents and steroids followed by radiotherapy for Ann Arbor stage II tumors and stage I of the palate lymphoma and the nasal cavity lymphoma extended to paranasal sinus.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.49-55
• /
• 2020

In this study, the fatigue behavior and fatigue life characteristics of PA2200 specimens fabricated by SLS 3D printer were studied. Fatigue tests were performed according to the standard specification (ASTM E468) and fatigue life curves were obtained. In order to perform the fatigue test, mechanical properties were measured according to the test speed of the simple tensile test, and the self-heating temperature of the specimen according to the test speed was measured using an infrared temperature measuring camera in consideration of heat generation due to plastic deformation. There was no significant difference within the set test speed range and the average self-heating temperature was measured at 38.5 ℃. The mechanical strength at the measured temperature showed a relatively small difference from the mechanical strength at room temperature. Fatigue test conditions were established through the preceding experiments, and the loading conditions below the tensile strength at room temperature 23 ℃ were set as the cyclic load. The maximum number of replicates was less than 100,000 cycles, and the fracture behavior of the specimens with the repeated loads showed the characteristics of Racheting. It was confirmed that SLS 3D printing PA2200 material could be applied to the Basquin's S-N diagram for the fatigue life curve of metal materials. SEM images of the fracture surface was obtained to analyze the relationship between the characteristics of the fracture surface and the number of repetitions until failure. Brittle fracture, crazing fracture, grain melting, and porous fracture surface were observed. It was shown that the larger the area of crazing damage, the longer the number of repetitions until fracture.