• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.73-79
• /
• 2002

The NO emissions at the exhaust manifo1d were investigated with a fast NO analyzer to investigate the cycle-by-cycle variations on NO emissions level and the dependence of NO emissions on combustion. The measurement was performed with a part load condition with respect to the mixture ratios and the changes in loads at 1800rpm. The averaged values were obtained during 200 cycles. We found that there is characteristic pattern in 70 emissions from exhaust port and it was possible to set a representative value with the data sampled during specific period. As the load increased, the characteristics of NO emissions were more dependent on combustion pressures. It was also analyzed that the correlation between combustion pressures and NO emissions for different equivalence ratios tends to increase as the mixture goes leaner, Furthermore, this correlation for the lean mixture near the lean limit seemed to be kept.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.641-648
• /
• 2006

In this study, a two-stage phase-separate cycle was investigated analytically to improve the performance of the $CO_2$ system in the cooling mode. The simulation results were verified with the measured data. The predictions using the simulation model were consistent with the measured data within ${\pm}20%$ deviations. The performance of the modified $CO_2$ system with the two-stage phase-separated cycle was analyzed with the variations of outdoor temperature and EEV opening. The cooling COP decreased with the increase of compressor frequency. The highest COP was 2.7 at compressor frequencies of 30 Hz and 30 Hz for the first and second compressors, respectively. In addition, the cooling COP increased by 9.3% with an application of optimum control of the first and second-stage EEV openings.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.28-31
• /
• 2023

This study presents a comprehensive procedure for the low cycle fatigue test of ultrasonically welded (UW) coated conductor (CC) lap-joints. The entire process is examined in detail, from the robust fabrication of the UW REBCO CC joints to the reliability testing under a low number of repeated cycle fatigue conditions. A continuous I_c measurement system enables real-time monitoring of I_c variations throughout the fatigue tests. The study aims to provide a step-by-step procedure that involves joint fabrication, electromechanical property (EMP) tests under uniaxial tension for stress level determination, and subsequent low-cycle fatigue tests. The joints are fabricated using a hybrid method that combines UW with adding In-Sn soldering, achieving a flux-free hybrid welding approach (UW-HW flux-free). The selected conditions for the low cycle fatigue tests include a stress ratio of R=0.1 and a frequency of 0.02 Hz. The results reveal some insights into the fatigue behavior, irreversible changes, and cumulative damage in the CC joints.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.404-409
• /
• 2005

In this paper a 2-stage $CO_2$ cycle was simulated to predict the performance characteristics with operating parameters. The simulation results showed similar tendency compared to the measured system pressure, capacity, COP etc. System characteristics were analyzed with the variations of outdoor temperature and EEV opening. In the simulation, the highest COP was 2.7 at 30-30 Hz and it decreased as compressor frequency increased. Besides, system COP can be increased by optimizing EEV opening.

• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.28-35
• /
• 2003

This paper presents analysis results for the effect of power control strategies on the part load performance of gas turbine based power generation systems utilizing exhaust heat of the gas turbine such as combined cycle power plants and regenerative gas turbines. For the combined cycle, part load efficiency variations were compared among different single shaft gas turbines representing various technology levels. Power control strategies considered were fuel only control and IGV control. It has been observed that gas turbines with higher design performances exhibit superior part load performances. Improvement of part load efficiency of the combined cycle by adopting air flow modulation was analyzed and it was concluded that since the average combined cycle performance is affected by the range of IGV control as well as its temperature control principle, a control strategy appropriate for the load characteristics of the individual plant should be adopted. For the regenerative gas turbine, it is likewise concluded that maintaining exhaust temperature as high as possible by air flow rate modulation is required to increase part load efficiency.

• 천문학회지
• /
• 제54권4호
• /
• pp.121-128
• /
• 2021

It has been known that the global asteroseismic parameters as well as the stellar acoustic mode parameters vary with stellar magnetic activity. Some solar-like stars whose variations are thought to be induced by magnetic activity, however, show mode frequencies changing with different magnitude and phase unlike what is expected for the Sun. Therefore, it is of great importance to find out whether expected relations are consistently manifested regardless of the phase of the stellar magnetic cycle, in the sense that observations are apt to cover a part of a complete cycle of stellar magnetic activity unless observations span several decades. Here, we explore whether the observed relations of the global seismic parameters hold good regardless of the phase of the stellar magnetic cycle, even if observations only cover a part of the stellar magnetic cycle. For this purpose, by analyzing photometric Sun-as-a-star data from 1996 to 2019 covering solar cycles 23 and 24, we compare correlations of the global asteroseismic parameters and magnetic proxies for four separate intervals of the solar cycle: solar minima ±2 years, solar minima +4 years, solar maxima ±2 years, and solar maxima +4 years. We have found that the photometric magnetic activity proxy, S_ph, is an effective proxy for the solar magnetic activity regardless of the phase of the solar cycle. The amplitude of the mode envelope correlates negatively with the solar magnetic activity regardless of the phase of the solar cycle. However, relations between the central frequency of the envelope and the envelope width are vulnerable to the phase of the stellar magnetic cycle.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.934-939
• /
• 2014

The daily recording of basal body temperature is the most useful method of determining the term of ovulation by resolving the rise in temperature. To support this aim, Graphical User Interface (GUI) system is designed and implemented to visualize the basal body temperature variations on daily basis by using android platform smartphone with programming multi-thread Java modules. To estimate the occurrence of ovulation cycle, a new method of analyzing the low-frequency features including a DC level and the second largest peak in frequency spectrum domain is proposed with interpreting the prominent features into the average basal-body temperature variations and a menstrual cycle.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.98-104
• /
• 2002

A study on microstructures of welds for Zircaloy-4 sheath end closure by the resistance upset welding methods was carried out. Two upset welding process variations such as magnetic farce and multi-impulse resistance welding were used. Grain size and microhardness across welds were analysed in terms of welding parameters. Magnetic farce resistance weld with one cycle of unbalanced mode has smaller upset length and $\alpha-grain$ size in heat affected zone than those of multi-impulse resistance weld because of lower heat input and shorter welding time. Heat affected zone formed by two upset resistance welding variations revealed fine Widmanstatten structure or martensitic ${\alpha}'$ structure due to the high heating rate and foster cooling rate. Magnetic force resistance welds showed recrystallized grains before grain growth, whereas multi-impulse resistance welds showed full grain growth.

• 환경위생공학
• /
• 제12권1호
• /
• pp.59-68
• /
• 1997

이 연구에서는 SBR에 Rotating disks를 부착하여 회전하면서 두 원판 사이에서 전단력이 발생하는 BS-SBR을 이용하여 용해성 유기물질 제거율과 슬러지 분리에 대해 비교 검토하였다. BS-SBR 공정에서는 부유성 활성슬러지와 생물학적 고정막에 대해 동시처리 되어 높은 처리효율을 보였다. SCOD 제거율은 SBR보다 높은 97%를 보였다. 처리수의 평균 SS 농도는 $4.8mg/{\ell}$ 정도로 나타났고, 1-cycle/d 및 3-cycle/d 모두 $10mg/{\ell}$ 이하를 유지하여 매우 효과적임을 알 수 있었다. 슬러지 침전 특성은 SBR과는 상이한 매우 좋은 결과를 보였다. 운전 중 슬러지는 진한 갈색으로 플록이 잘 형성되었고, 그 크기는 SBR에서 보다 크다는 것이 눈으로 확인할 수 있을 정도였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권4호
• /
• pp.314-322
• /
• 2012

섬진강 하구에서 수온, 염분, pH, 용존산소, 부유입자물질, 영양염류, 엽록소 a의 시간에 따른 변화 양상을 파악하기 위해서 2006년 3월(건기)과 7월(우기)에 각각 25시간 연속관측을 실시하였다. 또한 공간적인 분포특성을 파악하기 위해서 염분경사에 따라 해양환경 조사를 실시하였다. 섬진강 하구에서 염분의 변화는 건기에는 조석주기, 우기에는 강물 유출량에 영향을 받는 것으로 나타났다. 용존무기영양염류(질산염, 아질산염, 규산염) 농도의 시공간적 분포는 건기에는 염분의 변화와 좋은 상관관계를 보였다. 반면 우기에는 시간에 따라 농도 변화가 작았다. 우기시 영양염류의 평균 농도는 건기에 비해 용존무기질산염의 경우 약 6배, 용존무기인의 경우 약 4배, 용존무기규산염의 경우 약 43배 높게 나타났다. 엽록소 a 농도는 용존무기영양염류의 농도가 높은 우기에 비해 건기에 높게 나타났다. 이 연구결과, 우기와 건기에 해양환경인자의 시공간적 분포는 조석과 강물유출량의 영향에 의해 결정되며, 엽록소 a의 분포는 용존무기영양염류의 분포보다는 담수의 유출량 변화와 연관성이 있는 것으로 판단된다.