• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2003

The gonad index (GI), reproductive cycle with gonad developmental phases, first sexual maturity and the sex ratio of the jedo venus, Protothaca jedensis, on the coastal waters of Boryeong, Korea were investigated by histological study. Samples were collected from the subtidal zone of Boryeong, Korea from January to December, 1999. Monthly changes in the gonad index in femal and male clams gradually increased from February and reached the maximum in May, and then the values rapidly decreased from June and reached the minimum in November as seen in variations of the reproductive cycle. The spawning period of this species was once a year between May and July, there was a spawning peak between June and July when seawater temperature was over 20$^{\circ}C$. The reproductive cycle of this species in female and male clams can be classified into five successive stages: early active stage (December to March), late active stage (February to June), ripe stage (April to July), partially spawned stage (May to July) and spent/inactive stage (July to January). Percentages of first sexual maturity of female and male clams of 30.1-35.0 mm in shell length were 52.6% and 60.0%, respectively, and 100% for the clams over 45.1 mm in shell length. The sex ratio of individuals > 30.1 mm in shell length was 1:1 (X$^2$ = 0.40, p > 0.05).

• Journal of Microbiology and Biotechnology
• /
• v.6 no.6
• /
• pp.425-431
• /
• 1996

The enzymatic characteristics of Alcaligenes latus were investigated by measuring the variations of various enzyme activities related to biosynthesis and degradation of poly-${\beta}$-hydroxybutyrate (PHB) during cultivation. All PHB biosynthetic enzymes, ${\beta}$-ketothiolase, acetoacetyl-CoA reductase, and PHB synthase, were activated gradually at the PHB accumulation stage, and the PHB synthase showed the highest value among three enzymes. This indicates that the rate of PHB biosynthesis is mainly controlled by either ${\beta}$-ketothiolase or acetoacetyl-CoA reductase rather than PHB synthase. The enzymatic activities related to the degradation of PHB were also measured, and the degradation of PHB was controlled by the activity of PHB depolymerase. The effect of supplements of metabolic regulators, citrate and tyrosine, was also investigated, and the activity of glucose-6-phosphate dehydrogenase was increased by metabolic regulators, especially by tyrosine. The activities of ${\beta}$-ketothiolase and acetoacetyl-CoA reductase were also activated by citrate and tyrosine, while the activity of PHB depolymerase was depressed. The increased rate and yield of PHB biosynthesis by metabolic regulators may be due to the increment of acetyl-CoA concentration either by the repression of the TCA cycle by citrate through product inhibition or by the activation of sucrose metabolism by the supplemented tyrosine.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.101-111
• /
• 2014

The Product Carbon Footprint Labeling has been run for more than four years by the Ministry of Environment and there are number of products labeled by KEITI(Korea Environmental Industry & Technology Institute), as for declaring products with their carbon emission during life cycle stages. There are several categories for certifying products by the characteristics of usage. Building products which are applied to a building as combined components or elements, are classified as production goods which means that the products are chosen by a business, not by a final consumer. In this paper, current status of PCF labeling has been reviewed focused on building products and the characteristics of carbon emission by a kind of product such as interior products, window products, structural products, system products and others. Until Dec. 2013, 82 products has been labeled and it covers about 53% among labeled product goods by the certification. Among the labeled building products, interior products are main products. From the results of comparison, variations of emission amounts by products have been found and the cause of variation could be explained by the purpose and material properties of products. However, the exact reason for variations cannot be acquired because of lack of information and the short operation period of the certification program. Further studies and more products are needed to be studied and analyzed focused on the emission characteristic by each product and to suggest reduction technologies for sustainable building products.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.39-50
• /
• 1980

This paper presents the variations obtained in heat flow rate and engine performance of a four-stroke cycle Diesel engine when there were changes in the temperature of cooling water, compression ratio, injection timing of fuel, and other factors. Heat dissipation of engine cylinder was calculated by the heat transfer coefficient of Nusselt's empirical equation and the analysis of distribution of temperature in cylinder barrel was obtained by the finite element method of two-dimensional steady state heat conduction. In this experiment, the out side temperature of cylinder liner was measured by the data logger, and the temperature distribution of liner was computed by the analysis of triangular finite element model under the assumption due to surface heat flux of cylinder inner surface. The results obtained by this study are as follows. Under the given operating condition, the temperature distribution of cylinder liner by using finite element method shows that the mean temperature of barrel is in accordance with the experimental results of Eichelberg and temperature difference is lower than 4.23.deg. C. The heat dissipation of engine decrease in accordance with the decrease of piston mean velocity, compression ratio, and the increase of coolant temperature. Influence on the delay of injection timing of fuel brings about the decrease of heat rejection over the cylinder at constant test conditions.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.24.2-24.2
• /
• 2009

We present the results of new CCD photometry for the contact binary BX Peg, made during three successive months beginning on September 2008. As do historical light curves, our observations display an O'Connell effect and the November data by themselves indicate clear evidence for very short-time brightness disturbance. For these variations, model spots are applied separately to the two data set of Group I (Sep.--Oct.) and Group II (Nov.). The former is described by a single cool spot on the secondary photosphere and the latter by a two-spot model with a cool spot on the cool star and a hot one on either star. These are generalized manifestations of the magnetic activity of the binary system. Twenty light-curve timings calculated from Wilson-Devinney code were used for a period study, together with all other minimum epochs. The complex period changes of BX Peg can be sorted into a secular period decrease caused dominantly by angular momentum loss due to magnetic stellar wind braking, a light-travel-time (LTT) effect due to the gravitational effect of a low-mass third companion, and a previously unknown short-term oscillation. This last period modulation could be produced either by a second LTT orbit with a period of about 16 yr due to the existence of a fourth body or by the effect of magnetic activity with a cycle length of about 12 yr.

• Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.298-310
• /
• 2022

Although giant and large fish species are highly important as a keystone species in the marine ecosystem, there have been no or few studies on their spatio-temporal variations around the Korean peninsula. For this, we analyzed daily reports made by observers at 57 fishery landing sites in Korea over 6 years, from 2011 to 2016. In total, 153 fish species were re-identified based on photos and descriptions recorded by Korean observers, of which five species were classified as a giant fish over 5 m in maximum total length (MTL) and 17 species as a large fish from 3 m to 5 m MTL according to the data presented by Froese & Pauly (2021). Among the giant and large fish species, Mola mola was the most abundant species, with 75 individuals landed as by-catch. The second most abundant species was Isurus oxyrinchus (31), followed by Mobula mobular (23), Lamna ditropis (17), Masturus lanceolatus (16), Sphyrna zygaena (14), and Prionace glauca (12). As a result of cluster analysis based on the number of individuals of giant and large fish species by year and sea, six years were separated into two clusters (2011-2013 vs. 2014-2016), with high contribution of M. mola, I. oxyrinchus, and M. lanceolatus; and three seas were separated into two clusters (eastern + southern seas vs. western sea), with high contribution of M. lanceolatus, L. ditropis, and I. oxyrinchus. The largest number of M. mola accounted for 64% of the total in 2014 and 2016, and 71% in summer (June-August). It is assumed to have a correlation between seawater temperature fluctuation and the occurrence of giant and large fish species. Our study highlights importance of longterm monitoring of giant and large fish species, and can help to understand the life cycle such as natal or nursery migration of giant and large fish species around the Korean peninsula.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.96.2-96.2
• /
• 2013

The solar images are taken by the CCD detectors of the Sun monitoring satellites. The solar images are constructed after removing the traces of cosmic rays on the raw CCD data files. Thus, while applying the method of removing the cosmic rays traces, we can estimate the cosmic rays flux by counting the number of traces. The cosmic ray flux in the steady state might be the sum of the solar and galactic cosmic rays. However, the abrupt change in the flux could be assumed to be originated from the Sun. Therefore, we can identify the solar origins of the sudden solar cosmic ray flux changes from the phenomena shown in the processed solar images taken by SOHO/EIT. As the results, the estimated cosmic ray flux in the steady state is the anti-correlated with sunspot numbers, which shows the minima in cosmic ray flux at the solar cycle maxima defined by the sunspot numbers. The profiles of estimated solar cosmic ray associated with the ground level enhancements have the significant increase in the cosmic ray flux with good correlation. Thus, the solar images are valuable data useful in estimating the solar cosmic ray long term and transient flux variations.

• Journal of Microbiology
• /
• v.34 no.4
• /
• pp.327-333
• /
• 1996

Yeast, like many other microbes, encounters large variations in ambient pH in their natural environments. Microorganisms capable of growing over a wide pH range require a versatile, efficient pH homeostatic mechanism protecting intracellular processes against extremes of pH. In several organisms, fusions to the bacterial lacZ gene have been extremely useful for the identification of genes expressed at different time during the life cycle or under different growth conditions. In this study, using the lacZ gene screening system, we surveyed a large number of yeast strains with lacZ insertion to identify genes regulated by pH. A yeast genomic library was constructed and inserted with lacZ by a shuttle mutagenesis procedure. The yeast transformants were individually picked up with a toothpick, replica-plated, and grown in alkaline pH medium. Among the 35,000 colonies screened, 10 candidate strains were identified initially by the $\beta$-gal assay. We finally confirmed two yeast strains carrying the genes whose expression are strictly dependent on pH of growth medium. One of the fusions showing a 10-fold induction in expression level in response to alkali pH was selected and further characterized. The pH-regulated gene was cloned by inverse PCR and a partial sequence of the gene was determined. Identification and characterization of the gene is currently under investigation.

• Journal of the Korean Magnetic Resonance Society
• /
• v.8 no.2
• /
• pp.127-138
• /
• 2004

We obtained the chemical shifts of amide protons (NHs) in helical peptides at various temperatures and trifluoroethanol (TFE) concentrations using 2-dimensional NMR spectroscopy. These NH chemical shifts and their temperature dependence exhibited characteristic periodicity of 3-4 residues per cycle along the helix, where downfield shifted NHs showed larger temperature dependence. In an attempt to understand these observations, we focused on hydrogen bonding changes in the peptides and examined the validity of two possible explanations: (1) changes in intermolecular hydrogen bonding caused by differential solvation of backbone carbonyl groups by TFE, and (2) changes in intramolecular hydrogen bonding due to disproportionate variations in the hydrogen bonding within the peptide helix. Interestingly, the slowly exchanging NHs, which were on the hydrophobic side of the helix, showed consistently larger temperature dependences. This could not be explained by the differential solvation assumption, because the slowly exchanging NHs would become more labile if the preceding carbonyl groups were preferentially solvated by TFE. We suggest that the disproportionate changes in intramolecular hydrogen bonding better explain both the temperature dependence and the exchange behavior observed in this study.

• Wind and Structures
• /
• v.9 no.4
• /
• pp.255-270
• /
• 2006

Several analytical procedures available in literature, for the evaluation of wind induced fatigue damage of structures, either assume the wide band random stress variations as narrow band random process or use correction factors along with narrow band assumption. This paper compares the correction factors obtained using the Rainflow Cycle (RFC) counting of the measured stress time histories on a lamp mast and a lattice tower, with those evaluated using different frequency domain methods available in literature. A Bi-modal spectral method has been formulated by idealising the single spectral moment method into two modes of background and resonant components, as considered in the gust response factor, for the evaluation of fatigue of slender structures subjected to "along-wind vibrations". A closed form approximation for the effective frequency of the background component has been developed. The simplicity and the accuracy of the new method have been illustrated through a case study by simulating stress time histories at the base of an urban light pole for different mean wind speeds. The correction factors obtained by the Bi-modal spectral method have been compared with those obtained from the simulated stress time histories using RFC counting method. The developed Bi-modal method is observed to be a simple and easy to use alternative to detailed time and frequency domain fatigue analyses without considerable computational and experimental efforts.