• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.37-44
• /
• 2009

It is well known that a refrigerant-induced noise is caused by two-phase flow in the indoor unit of a heat pump air-conditioner. Especially when the flow pattern in a pipe is intermittent flow, the irregular noise occurs frequently. But it is very difficult to avoid this kind of the noise for the application of air-conditioner. Therefore, in this research, the flow patterns at two-phase flow state in a pipe of the indoor unit for the air-conditioner are researched using cycle simulator at typical cycle conditions. In order to find the relationship between refrigerant-induced noise and flow pattern, the noise patterns are investigated with respect to the estimated flow pattern from the various flow pattern maps. Base on the estimations of the flow patterns by those maps, the refrigerant-induced noise is evaluated as decreasing tube diameter, which can transit the flow pattern from slug to annular flow.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.547-550
• /
• 2011

The purpose of this paper is to verify and validate the maintenance tasks of the construction of a nuclear facility using a digital mock-up and simulation technology instead of a physical mock-up. Prior to the construction of a nuclear facility, a remote simulator that provides the opportunity to produce a complete digital mock-up of the PRIDE (Pyroprocess Integrated Inactive DEmonstration Facility) region and its remote handling equipment, including operations and maintenance procedures has been developed. In this paper, the system architecture and graphic user interface of a remote simulator that coincides with the extraordinary nature of a nuclear fuel cycle facility is introduced. In order to analyze the remote accessibility of a remote manipulator, virtual prototyping that was performed it by using haptic device of external input devices under a 3D full-scale digital mock-up is explained.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.161-164
• /
• 2000

The architecture of microprocessor for a embedded system should be one that can perform more tasks with fewer instruction codes. The machine codes that high-level language compiler produces are mainly composed of specific ones, and codes that have small size are more frequently used. Extended Instruction Set Architecture (EISC) was proposed for that reason. We have designed pipe-line system for 64 bit EISC microprocessor. function level simulator was made for verification of design and instruction set architecture was also verified by that simulator. The behavioral function of synthesized logic was verified by comparison with the results of cycle-based simulator.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권4호
• /
• pp.147-155
• /
• 2007

Mobile air conditioning systems work under widely changing operating conditions. To understand the system behavior under such dynamic conditions, a test facility that can impose transient loads as well as conducting dynamic measurements is needed. To test mobile air conditioning systems including their dynamic performance under various drive cycle patterns without using full scale vehicles in a wind tunnel, a new test facility, called "dynamic simulator," is described. It can replicate real vehicle operating conditions by interacting with the system being tested based on the measured system performance and subsequently adjusting the air properties returning to the test system based on the results of a numerical cabin model. A new dynamic simulator has been designed, constructed, and verified for performing dynamic tests. It was successful in controlling the temperature and relative humidity of the air returning to the test unit within ${\pm}0.7^{\circ}C$ and ${\pm}4%$ of their respective intended values. The verification test under the New European Driving Cycle demonstrated that detailed transient behavior of the mobile air conditioning system could be measured by using this dynamic simulator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.711-714
• /
• 2001

As the life cycle of the vehicle become shorter, the method that reduce the development time of new model become more important. In this reason, the development of the simulator that provides similar environment with the actual vehicle road characteristics is increasing. In this paper, the multi-axis simulator is designed and analyzed by kinematic method. The simulator has a function simulating the 3 load elements; vertical, longitudinal, and lateral force respectively and simultaneously. The result of this paper can be used for developing the multi-axis simulator linkage.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1049-1052
• /
• 1999

We present a use. interface(UI) simulator for developing a mobile phone. This simulator consists of 3 major modules: Graphic Tool Editor, User Interface Software(UI), and Network Command Processor(NCP). The Graphic Tool Editor can design a virtual mobile terminal. The NCP sends a command to the phone and then receives its status from the phone after completion of the command. We can add or modify lots of features easily to the phone using the UI module. These modules can interact each other by sharing the common area in the memory. By doing so, these modules can exchange their status and data to operate in real-time. We have designed and tested a virtual prototyping phone for the LGP 3200 manufactured by LGIC by using the simulator. Through a series of experiment, we have believed that our virtual prototyping interactive simulator can do shorten its development and testing cycle by applying it in the early design phase.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.408-411
• /
• 1999

Microarchitecture simulator is an important tool to verify and optimize the microarchitecture of a new microprocessor. Moreover. it can be use as a performance simulator to estimate the target microprocessor′s performance. And system software designers can use it as a software developing environment. This paper describes a "microarchitecture simulator for on-chip Multiprocessor microprocessor". It is a program-driven and cycle-based simulator that can execute simultaneous mutithreading benchmarks. We verified the microarchitecture of a new on-chip multiprocessor microprocessor with it and did performance simulations to estimate the performance of the on-chip multiprocessor microprocessor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.478-483
• /
• 2000

In this study to cope with the decreasing product's life-cycle a virtual simulator to realize the simulation environment similar to a real manufacturing line is developed. The developed simulator plays a role in reducing the product conversion time by alternating manufacturing components and work plans on the simulation as manufacturing lines change and actuating a virtual manufacturing lines change and actuating a virtual manufacturing line before a real production. The developed simulator realized a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. Also It can be shown that the simulator can cope with rapid change of a manufacturing line by developing a interface that a separate process is managed for each manufacturing module and a manipulator component and a work cell are changed for a user to become convenient to teach tasks of each work module. using Microsoft Visual C++ 6.0 and OpenGL of Silicon Graphics for libraries to realize 3-dimensional graphic and constructing a database system, a hybrid type of hierachical and relational model to develop a progra that has efficiency and standardization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.138-142
• /
• 2004

Recently over dropped frequencies of power system were recorded when power system was unbalanced between generation and demand. Therefore load following characteristic analysis of thermal and combined cycle power plant generators is necessary for low frequency condition analysis of power system. Frequency simulator supplies simulated frequency to the online generator for prescribed goal. This simulator needs to minimize effects to power system and requires stability first. This paper introduces design and manufacturing case of frequency simulator for load following characteristic analysis of generators.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.