• 제목/요약/키워드: Cycle by cycle variation

검색결과 556건 처리시간 0.02초

INFLUENCE OF INITIAL COMBUSTION IN SI ENGINE ON FOLLOWING COMBUSTION STAGE AND CYCLE-BY-CYCLE VARIATIONS IN COMBUSTION PROCESS

  • Lee, Kyung-Hwan;Kim, Kisung
    • International Journal of Automotive Technology
    • /
    • 제2권1호
    • /
    • pp.25-31
    • /
    • 2001
  • It is necessary to understand the combustion process and cycle-by-cycle variation in combustion to improve the engine stability and consequently to improve the fuel economy and exhaust emissions. The pressure related parameters instead of mass fraction burned were compared for the effect of initial combustion pressures on the following combustion and the analysis of cycle-by-cycle variation in combustion for two pen injected SI engines. The correlation between IMEP and pressures at referenced crank angles showed almost the same trends for equivalence ratios, but the different mixture preparations indicated different tendency. The dependency of IMEP on pressure at the referenced crank angles increases as the mixture becomes leaner for both engines. The mixture distribution in the combustion chamber was varied with the coolant temperature and intake valve deactivation due to the evaporation of fuel and air motion. The correlation between pressure related parameters were also compared for the coolant temperatures and air motion.

  • PDF

Frequency of Solar Spotless Days and Flare Index as Indices of Solar Cycle Activity

  • Oh, Suyeon
    • Journal of Astronomy and Space Sciences
    • /
    • 제31권2호
    • /
    • pp.145-148
    • /
    • 2014
  • There was a research on the prolongation of solar cycle 23 by the solar cyclic variation of solar, interplanetary geomagnetic parameters by Oh & Kim (2013). They also suggested that the sunspot number cannot typically explain the variation of total solar irradiance any more. Instead of the sunspot number, a new index is introduced to explain the degree of solar activity. We have analyzed the frequency of sunspot appearance, the length of solar cycle, and the rise time to a solar maximum as the characteristics of solar cycle. Then, we have examined the predictability of solar activity by the characteristics of preceding solar cycle. We have also investigated the hemispheric variation of flare index for the periods that the leading sunspot has the same magnetic polarity. As a result, it was found that there was a good correlation between the length of preceding solar cycle and spotless days. When the length of preceding solar cycle gets longer, the spotless days increase. It is also shown that the shorter rise time to a solar maximum is highly correlated with the increase of sunspots at a solar maximum. Therefore, the appearance frequency of spotless days and the length of solar cycle are more significant than the general sunspot number as an index of declining solar activity. Additionally, the activity of flares leads in the northern hemisphere and is stronger in the hemisphere with leading sunspots in positive polarity than in the hemisphere with leading sunspots in negative polarity. This result suggests that it is necessary to analyze the magnetic polarity's effect on the flares and to interpret the period from the solar maximum to solar maximum as the definition of solar cycle.

스파크 점화기관의 점화에너지 변화와 연소 변동과의 관계에 관한 연구 (A study on the cyclic variability as a function of ignition energy in spark ignition engines)

  • 한성빈
    • 대한기계학회논문집B
    • /
    • 제21권12호
    • /
    • pp.1647-1655
    • /
    • 1997
  • The cyclic variations can be characterized by the variations in different type of parameters. These parameters may be grouped into four main categories: pressure-related parameters, combustion-related parameters, flame front-related parameters, and exhaust gas-related parameters. One of the resultant effects of the cycle-by-cycle variation in the combustion process, which is the most important with regard to the engine performance characteristics, is the cycle-by-cycle variation in IMEP. This paper uses the repetitive discharge igniter, which can change the ignition energy easily, to study on idle stability in a spark ignition engine. From this device, the 6 number of spark and 0.20 ms spark interval, it is very available for the idle stability.

직접분사식 수소기관의 사이클변동 원인해석에 관한 연구 (An Investigation on a Cause of Cycle Variation in Hydrogen Fueled Engine with Direct Injection)

  • 김윤영;이종태
    • 한국수소및신에너지학회논문집
    • /
    • 제13권3호
    • /
    • pp.233-241
    • /
    • 2002
  • To achieve hydrogen power system with high performance and stable operation, the COVimep of hydrogen fueled engine with direct injection was evaluated with the change of engine speed, injection timing, air-fuel equivalence ratio and spark timing. And the cause of cycle variation was analyzed by using coefficient of variation in combustion period defined in this study. the results showed that the cycle variation of hydrogen fueled engine is mainly dependent on the early combustion period.

엔진속도 변화에 따른 연소실내 Spark Plug 주위의 유동특성 고찰 (Characteristics of in-cylinder flow near the spark-plug for different engine speeds)

  • 성백규;전광민
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2289-2297
    • /
    • 1996
  • Flows in the combustion chamber near the spark plug are measured using LDv.A single cylinder DOHC S.I. engine of compression ratio 9.5:1 with a transparent quartz window piston is used. Combustion chamber shape is semi-wedge type. Measured data are analyzed using the ensemble averaged analysis and the cycle resolved analysis which uses FFT Filtering. Turbulent intensity and mean velocity are studied in the main flow direction and the normal to main flow direction as a function of engine speeds. The results shows that the turbulent intensity obtained by the ensemble averaged analysis is greater than that calculated by the cycle resolved analysis. Especially, the ensemble averaged analysis shows increase in turbulence at the end of compression stroke although the cycle resolved analysis shows increase only in the cycle-by-cycle variation with no noticeable increase in turbulence. The mean velocity in the main flow direction increase as engine speed increase. But the mean velocity normal to the main flow does not show such increase. Turbulent intensity in both direction increase in proportion to engine speeds. The magnitude of turbulent intensity is about 0.3 ~ 0.4 times the mean piston speeds at the end of the compression stroke.

공회전시 연소의 사이클 변화 모델링 및 확인실험 (Modeling and its Experimental Validation on Cycle Variability of Combustion at Idle Operation)

  • 조한승;황승환;이종화
    • 한국자동차공학회논문집
    • /
    • 제4권2호
    • /
    • pp.221-229
    • /
    • 1996
  • The engine speed fluctuation at idle operation mainly comes from cyclic variation of combustion in SI engine. In the present study, engineering model that is representing the cyclic variation of combustion was proposed for the sub-model of the engine cycle simulation. From the observed behaviors of the mass burn rates, probability density functions for the parameters of Wiebe function were defined. The mass burn rate of each cycle is obtained by Monte Cralo perturbation method with the probability function. The simulation results shows that trends of cylinder pressure variation and imep distribution follow up with those of experimental results at idle condition.

  • PDF

Cycle-to-Cycle Fluctuations in a Spark Ignition Engine at Low Speed and Load

  • Han, Sung Bin;Hwang, Sung Il
    • 에너지공학
    • /
    • 제22권2호
    • /
    • pp.205-210
    • /
    • 2013
  • Cycle-to-cycle variation has long been recognized as limiting the range of operating conditions of spark ignition engines, in particular, under lean and highly diluted operation conditions. At a part load, some of the cycles tend to knock, while others may have incomplete combustion by the time the exhaust valve opens. An experimental study has been performed in order to evaluate the relative contribution of several relevant parameters on the cyclic variability in spark ignition engines. In general, the stability of engine operation is improved with fuel injector according to the optimal injection timing, but the stability of engine operation at idle is not improved compared with a practical gasoline engine. In this study, we investigated the relationship of the effect of operating conditions for the stability at low speed and load.

On the Diurnal, Annual, and Solar Cycle Variations of Slant Total Electron Content in the Korean Peninsula

  • Yoon, Woong-Jun;Park, Kwan-Dong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제5권2호
    • /
    • pp.87-96
    • /
    • 2016
  • The ionospheric error, which is one of many error elements considered during the Global Navigation Satellite System (GNSS) positioning, is hard to be predicted due to the influence of geomagnetic activity and irregular solar activities. Thus, the present study analyzed a change pattern in the ionosphere through Global Ionosphere Map (GIM) data for 12 years from 2003 to 2014 and a variation in the Slant Total Electron Content (STEC) between Sinuiju and Busan which was the longest range in the southeastern direction of the Korean Peninsula. The variation in the STEC verified the diurnal, annual, and solar cycle variations due to the influence of solar activity. The diurnal variation was characterized that the variation in the STEC started to increase from 6-7 am and reached the maximum at 13-14 pm followed by being decreased. The seasonal variation was characterized that the variation in the STEC was high in spring and autumn whereas it was low in summer and winter. The solar cycle variation revealed that the variation in the STEC increased during solar maximum and decreased during solar minimum. The variation in the STEC was up to 20 Total Electron Content Unit (TECU) during the solar minimum and up to 60 TECU during solar maximum.

디젤기관의 대체연료로서 폐식용유의 유용성에 관한 연구 (A study on the usability of used vegetable oil as a diesel substitute in diesel engine)

  • 오영택
    • 대한기계학회논문집B
    • /
    • 제22권4호
    • /
    • pp.481-488
    • /
    • 1998
  • In recently, lots of researcher have been attached to develope various alternative fuels and to use renewable fuels for solution of the exhaust emission problems. In this study, the usability of used vegetable oil as alternative fuel for diesel engines has been investigated. This paper was compared with the exhaust emissions and performance in diesel engine with used vegetable oil and conventional diesel fuel. Since the vegetable oil includes oxygen of about 10%, it influenced the combustion process strongly. So, the smoke emissions of used vegetable oil were exhausted to be lower than those of diesel fuel. Also, the used vegetable oil was much the same cycle to cycle variation with diesel fuel except $P_{(dP}$d.theta.)max/, but the cycle to cycle variation of used vegetable oil was reduced significantly by preheating of the fuel and swirling of the intake air. It was concluded that used vegetable oil could be utilized effectively as renewable fuel for diesel engine.e.

캐스케이드 열펌프의 저단 사이클 충전량 변화에 따른 성능 특성 (Influence of Low Stage Refrigerant Charge Amount on the Performance of Cascade Heat Pump)

  • 박승병;최종민
    • 한국지열·수열에너지학회논문집
    • /
    • 제11권1호
    • /
    • pp.15-20
    • /
    • 2015
  • In this study, the optimization and performance characteristics of a cascade heat pump system was analyzed with the variation of low stage refrigerant charge amount. The cascade heat pump was designed and constructed with R134a and R410A as the refrigerant for high stage and low stage cycle, respectively. Experiments were conducted by varying the low stage charge amount and the performance characteristics of the cascade heat pump were studied. The refrigerant charge amount of the low stage cycle was varied between the ranges of -15% and +10% of the optimum charge amount. The performance variation experienced in the cascade heat pump due to the variation of refrigerant charge amount shows greater effect in the undercharge regions than the overcharge regions. COP reduction in the undercharge region is larger than the decrease in the overcharge region. Some cycle variation such as power consumption and cycle pressure according to low stage refrigerant charge amount showed different trends comparing with those according to high stage refrrgerant charge amount. Therefore, the optimum charge amount of the cascade heat pump should be determined based on the experimental data obtained by the variation of high and low stage refrigerant charge amount.