• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.115-121
• /
• 2008

A core engine for pre-cooled turbojet engines is designed and its component performances are examined both by CFD analyses and experiments. The engine is designed for a flight demonstration of precooled turbojet engine cycle. The engine uses gas hydrogen as fuel. The external boundary including measurement devices is set within $23cm{\times}23cm$ of rectangular cross section, in order to install the engine downstream of the air intake. The rotation speed is 80000 rpm at design point. Mixed flow compressor is selected to attain high pressure ratio and small diameter by single stage. Reverse type main combustor is selected to reduce the engine diameter and the rotating shaft length. The temperature at main combustor is determined by the temperature limit of non-cooled turbine. High loading turbine is designed to attain high pressure ratio by single stage. The firing test of the core engine is conducted using components of small pre-cooled turbojet engine. Gas hydrogen is injected into the main burner and hot gas is generated to drive the turbine. Air flow rate of the compressor can be modulated by a variable geometry exhaust nozzle, which is connected downstream of the core engine. As a result, 75% rotation speed is attained without hazardous vibration and heat damage. Aerodynamic performances of both compressor and turbine are obtained and evaluated independently.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.99-107
• /
• 2018

In this study, the injector transfer function (ITF) of a gas-gas coaxial jet-swirl injector is measured by perturbing jet or swirl flow using a speaker as jet flow increases. As a result of measuring the ITF varying feed system length, a peak occurs at a resonance frequency of space where the perturbed flow passes. With jet excitation, the ITF magnitude decreases, but increases thereafter as increasing the jet flow. Therefore the larger the velocity difference between jet and swirl flow, the larger the ITF. With swirl excitation, ITF decreases as increasing the jet flow because of the energy decrease with respect to the constant downstream flow.

• Research in Community and Public Health Nursing
• /
• v.30 no.1
• /
• pp.47-56
• /
• 2019

Purpose: This study was performed to evaluate effects of a stim-up matt walking exercise program on balance and gait of the frail elderly. Methods: A total of 37 elderly people recruited from S city were randomly assigned to the experimental group (n=22) and control group (n=15). The stim-up matt walking exercise program was offered twice a week for 8 weeks. Data were analyzed by SPSS 21.0. Results: The dynamic balance ability Timed Up and Go test of the experimental group was significantly faster than that of the control group (t=21.72, p<.001). The static balance ability open-eye standing test (t=44.15, p<.001) and close-eye standing test (t=9.01, p=.005) also showed increase in effects of the experimental group. In the walking ability, gait cycle (t=2.48, p=.018), cadence (t=-2.21, p=.034) and gait speed (t=-2.78, p=.009), positive effects were on. However, no statistically significant differences were found in stride length and double support. At the ankle joint range left ankle plantar flexion (t=3.92, p<.001) and left ankle dorsal flexion (t=4.51, p<.001) were higher in the experimental group than in the control group, and also right ankle plantar flexion (t=2.79, p=.008) and right ankle dorsal flexion (t=2.92, p=.006) increased in the experimental group. Conclusion: The significance of this study is that the stim-up matt walking exercise program for the frail elderly proves to be useful for improving balance and walking.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.109-113
• /
• 2021

In this study, an automated culture media replacement system was developed to analyze changes in the contraction characteristics of cardiomyocytes according to the state of the culture media. For the long-term storage of culture media, a Peltier refrigerator with a temperature of 5 to 8℃ was provided and a pH of 7.4 was maintained. The cell culture media of the cardiomyocytes was continuously replaced using interlocking pumps at a flow rate of 0.83 μl/h. The cardiomyocytes in which the culture media was replaced automatically demonstrated lower heartbeats per minute compared to samples in which there was no replacement. However, these cardiomyocytes moved more uniformly and produced greater displacement in one heartbeat cycle. It was observed that the sarcomere length of the cardiomyocytes increased due to the automated culture media replacement system. These cardiomyocytes were found to demonstrate better maturation compared to the control group. The maturation of cardiomyocytes was verified through staining images. The proposed automated culture media replacement system generates a uniform heart rate and improvements in contraction force. Based on the study, patient-specific drug toxicity assessments can be conducted using differentiated cardiomyocytes in induced pluripotent stem cells.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.298-310
• /
• 2022

Although giant and large fish species are highly important as a keystone species in the marine ecosystem, there have been no or few studies on their spatio-temporal variations around the Korean peninsula. For this, we analyzed daily reports made by observers at 57 fishery landing sites in Korea over 6 years, from 2011 to 2016. In total, 153 fish species were re-identified based on photos and descriptions recorded by Korean observers, of which five species were classified as a giant fish over 5 m in maximum total length (MTL) and 17 species as a large fish from 3 m to 5 m MTL according to the data presented by Froese & Pauly (2021). Among the giant and large fish species, Mola mola was the most abundant species, with 75 individuals landed as by-catch. The second most abundant species was Isurus oxyrinchus (31), followed by Mobula mobular (23), Lamna ditropis (17), Masturus lanceolatus (16), Sphyrna zygaena (14), and Prionace glauca (12). As a result of cluster analysis based on the number of individuals of giant and large fish species by year and sea, six years were separated into two clusters (2011-2013 vs. 2014-2016), with high contribution of M. mola, I. oxyrinchus, and M. lanceolatus; and three seas were separated into two clusters (eastern + southern seas vs. western sea), with high contribution of M. lanceolatus, L. ditropis, and I. oxyrinchus. The largest number of M. mola accounted for 64% of the total in 2014 and 2016, and 71% in summer (June-August). It is assumed to have a correlation between seawater temperature fluctuation and the occurrence of giant and large fish species. Our study highlights importance of longterm monitoring of giant and large fish species, and can help to understand the life cycle such as natal or nursery migration of giant and large fish species around the Korean peninsula.

• Journal of Veterinary Science
• /
• v.21 no.3
• /
• pp.48.1-48.18
• /
• 2020

Background: Mature oocytes at the metaphase II status (MII-stage oocytes) played an important role in assisted reproductive technology in non-human primates. Objectives: In order to improve the proportion of MII-stage oocytes retrieval, three different superovulation protocols were performed on 24 female cynomolgus monkeys. Methods: All the monkeys received once-daily injection of follicle-stimulating hormone (25 international unit [IU]) on day 3 of the menstruation, 3-day intervals, twice daily for 8-12 days until the time of human chorionic gonadotropin (1,500 IU) injection, on the 14-17th day of menstruation collecting oocytes. The difference between protocol I and protocol II was that 0.1 mg the gonadotropin-releasing hormone agonist was injected on day 1 of the menstruation, while the difference between personalized superovulation protocol and protocol II was that oocytes could be collected on the 14-17th day of menstrual cycle according to the length of each monkey. Results: The total number of oocytes harvested using the personalized superovulation protocol was much higher than that using protocol I (p < 0.05), and the proportion of MII-stage oocytes was significantly greater than that from either superovulation protocol I or II (p < 0.001 and p < 0.01 respectively), while the proportion of immature oocytes at the germinal vesicle was less than that from superovulation protocol I (p < 0.05). Conclusions: The personalized superovulation protocol could increase the rate of MII-stage oocytes acquired, and successfully develop into embryos after intracytoplasmic sperm injection, and eventually generated fetus.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• Journal of Hospice and Palliative Care
• /
• v.25 no.2
• /
• pp.76-84
• /
• 2022

Purpose: We compared cost-effectiveness parameters between inpatient and home-based hospice-palliative care services for terminal cancer patients in Korea. Methods: A decision-analytic Markov model was used to compare the cost-effectiveness of hospice-palliative care in an inpatient unit (inpatient-start group) and at home (home-start group). The model adopted a healthcare system perspective, with a 9-week horizon and a 1-week cycle length. The transition probabilities were calculated based on the reports from the Korean National Cancer Center in 2017 and Health Insurance Review & Assessment Service in 2020. Quality of life (QOL) was converted to the quality-adjusted life week (QALW). Modeling and cost-effectiveness analysis were performed with TreeAge software. The weekly medical cost was estimated to be 2,481,479 Korean won (KRW) for inpatient hospice-palliative care and 225,688 KRW for home-based hospice-palliative care. One-way sensitivity analysis was used to assess the impact of different scenarios and assumptions on the model results. Results: Compared with the inpatient-start group, the incremental cost of the home-start group was 697,657 KRW, and the incremental effectiveness based on QOL was 0.88 QALW. The incremental cost-effectiveness ratio (ICER) of the home-start group was 796,476 KRW/QALW. Based on one-way sensitivity analyses, the ICER was predicted to increase to 1,626,988 KRW/QALW if the weekly cost of home-based hospice doubled, but it was estimated to decrease to -2,898,361 KRW/QALW if death rates at home doubled. Conclusion: Home-based hospice-palliative care may be more cost-effective than inpatient hospice-palliative care. Home-based hospice appears to be affordable even if the associated medical expenditures double.

• Information Systems Review
• /
• v.25 no.2
• /
• pp.57-76
• /
• 2023

This study classifies the success of creators and YouTubers who have created channels on YouTube recently, which is the most influential digital platform. Based on the actual information disclosure of YouTubers who are in the field of science and technology category, video upload cycle, video length, number of selectable multilingual subtitles, and information from other social network channels that are being operated, the success of YouTubers using machine learning was classified and analyzed, which is the closest to the YouTube revenue structure. Our findings showed that neural network algorithm provided the best performance to predict the success or failure of YouTubers. In addition, our five factors contributed to improve the performance of the classification. This study has implications in suggesting various approaches to new individual entrepreneurs who want to start YouTube, influencers who are currently operating YouTube, and companies who want to utilize these digital platforms. We discuss the future direction of utilizing digital platforms.