• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.141-147
• /
• 1998

Under high temperature and high pressure, cyanogen disinter gration distruction mechanism brought followings results through continuous plug flow reactor system. 1. The temperature was a important reacting factor in cyanogen disintegration. Over $612.8^{\cird}K$ high disintegration rate or 99.99% was shown even under $2000{\;}mg/{\ell}$ cyanogen density. 2. The conditions of cyanogen disintegration was gained through experimenting the supercrietical condition of water in basic. To gain 99.99% disintegration rate under $1000{\;}mg/{\ell}$ early cyanogen density, the pressure showed 52.8 seconds at $523^{\cird}K$ and 84.2 atm and gained $0.56{\;}mg/{\ell}$ operating density. 3. Here is the reaction velocity formula of cyanogen disintegration by hydrolysis: This formula indicates the high possibility of cyanogen disintegration within a short time. And it also implys the potential possibility on treating NBDICOD and the technology in developing the environment cleaning progress as small size automatic controlling equipment.

• Biomolecules & Therapeutics
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2007

Flax seed(Linseed, Linum usitatissimum L.) and its oil, a richest source of alpha-linolenic acid(ALA)(${\omega}-3$), contain saturated fatty acids, neurotoxic cyanogen glycosides and immuno-suppressive cyclic-nonapeptides. Present paper describes the development of two chemical processes, Process-A and -B, to remove saturated fatty acids and to destroy cyclic nonapeptides and cyanogen glycosides from flax seed oil. Process-A consists of three major steps, i.e., extraction of fatty acid mixture by alkaline saponification, removal of saturated fatty acid by urea-complexation, and triglyceride reconstruction of unsaturated fatty acid via fatty acyl-chloride activation using oxalyl chloride. Process-B consists of preparation of fatty acid ethyl ester by transesterification, elimination of saturated fatty acid ester by urea-complexation, and reconstruction of triglyceride by interesterification with glycerol-triacetate (triacetin). The destruction of lipophilic cyclic nonapeptide during saponification or transesterification processes could be demonstrated indirectly by the disappearance of antibacterial activity of bacitracin, an analogous cyclic-decapeptide. The cyanogen glycosides were found only in the dregs after hexane extraction, but not in the flax seed oil. The reconstructed triglyceride of flax seed oil, obtained by these two different pathways after elimination of saturated fatty acid and toxic components, showed agreeable properties as edible oil in terms of taste, acid value, iodine and peroxide value, glycerine content, and antioxidant activity.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.297-301
• /
• 2004

The dTDP-D-glucose 4,6-dehydratase from Salmonella enterica was immobilized using covalent binding to cyanogen bromide activated sepharose. The immobilized enzyme was used to produce dTDP-4-keto-6-deoxy-D-glucose, a key sugar intermediate that can be used economically to produce diverse classes of unusual sugars appended in various antibiotics. The enzyme was immobilized on the sepharose after activation with cyanogen bromide. The maximum immobilization (80.03％) was achieved after 14 h of coupling. The covalently immobilized enzyme was stable, and an average of 78.4 ％ conversion was achieved until 120 h of immobilization when it was repeatedly used. Similar conversion was noticed for the first batch using the enzyme entrapped-hydrogel but activity was gradually decreased in the following batches. The production of dTDP-4-keto-6-deoxy-D-glucose by using an immobilized enzyme has high potential for commercial application.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3382-3388
• /
• 2011

Reaction of barbituric acid (BA), 1,3-dimethyl barbituric acid (DMBA) and 2-thiobarbituric acid (TBA) with cyanogen bromide and aldehydes in the presence of L-(+)-tartaric acid afforded a new route for the synthesis of stable heterocyclic 5-aryl-1H,1'H-spiro[furo[2,3-d]pyrimidine-6,5'-pyrimidine]2,2',4,4',6'(3H,3'H,5H)-pentaones which is a dimeric form of barbiturate (uracil and thiouracil derivative). In the reaction of 1,3-diethyl thiobarbituric acid (DETBA) the Knoevenagel condensation and then Michael adducts were obtained under the same condition. Structure elucidation is carried out by $^1H$ NMR, $^{13}C$ NMR, FT-IR and Mass analyses. Mechanism of the formation is discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.829-834
• /
• 2015

A simple and sensitive hydrogel-based detecting gel has been presented for the qualitative determination of cyanogen chloride(CK) using Konig reaction. To optimize Konig reaction conditions, the effects of pyridine and barbituric acid concentration were investigated. Under the optimized conditions, CK gas concentration was directly related with absorbance change at 567 nm. Based on aqueous solution test results, we finally prepared CK detecting hydrogel by absorbing pyridine and barbituric acid solution. Color change of the prepared CK detecting hydrogel was clearly observed when the detecting gel was exposed to 10 ppm CK gas.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.166-173
• /
• 1985

Several enzyme immobilization methods has been compared for immobilization of pepsin. Carboxymethyl cellulose and diethylaminoethyl cellulose were activated with Hcl and with NaOH, and were used for immobilization of pepsin. Sepharose-4B was activated cyanogen bromide, and was used for immobilization of pepsin. Porous glass beads were derivatized with 3-aminopropyitrlethoxysilane and with succinicanhydride, and were used for immobilization of pepsin. The results abtained were summarized as follow, 1. 10 mg/gr. dry bead and 15mg/gr. dry bead of pepsin were absorbed to CM-cellulose and DEAE-cellulose, 20 mg/gr. dry bead and 27 mg/gr. dry bead were coupled to CM-cellulose and DEAE-cellulose with glutaraldehyde respectively. Enzyme yields were 22% and 24% of soluble pepsin. 2. 16 mg/gr. dry bead of pepsin was attached to cyanogen bromide activated sepharose-4B, 19mg/gr. dry bead was cross linked to the activated bead with glutaraldehyde. Immobilized enzyme activity was 23% of soluble pepsin. 3. 40 mg/gr. dry bead of pepsin was conjugated to the derivatized glass beads. Immobilized enzyme activity was 45% of soluble pepsin.

• Carbon letters
• /
• v.8 no.4
• /
• pp.280-284
• /
• 2007

Samples of active carbon of $1150\;m^2/g$ surface area were impregnated with ammoniacal salts of copper, chromium and silver, with and without triethylenediamine. The samples of impregnated carbon were aged at $50^{\circ}C$, with and without 90% RH (relative humidity), for a little more than one year and chemically evaluated periodically. Initially copper (II) and chromium (VI) reduced very fast in the samples in humid atmosphere to the extent of 30% and 60% respectively in four months. These values were found to be unaffected by the presence of triethylenediamine (TEDA) indicating that the chemical did not retard the reduction process of chromium (VI) and copper (II). However, in the absence of humidity the reduction of the impregnants was significantly less (10-12%, w/w) in four months. It was quite evident; therefore, that the moisture was mainly responsible for the reduction of chromium (VI) and copper (II) species in impregnated carbons. The prolonged ageing of the samples with and without triethylenediamme after four months with and without humid atmosphere showed that the extent of reduction of chromium (VI) was very low, i.e. 5-10% and of copper (II) was 2-25%. Silver is not reduced due to carbon, as it remained unchanged in concentration on storage. The impregnated carbon samples (100 g) without triethylenediamine, which were aged at room temperature for 5 years in absence of humidity and unaged when evaluated against cyanogen chloride (CNCl) at a concentration of 4 mg/L and airflow rate of 30 lpm showed a high degree of protection (80- 110 minutes).

• Corrosion Science and Technology
• /
• v.6 no.6
• /
• pp.304-307
• /
• 2007

As to the reflection electrode of LCD (liquid crystal displays), silver-copper-gold alloy (hereafter, it is called as ACA (Ag98%, Cu1%, Au1%)) is an effective material of which weathering resistance can be improved more compared with pure silver. However, there is a problem that gold remains on the substrate as residues when ACA is etched in cerium ammonium nitrate solution or phosphoric acid. Gold can not be etched in these etchants as readily as the other two alloying elements. Gold residue has actually been removed physically by brushing etc. This procedure causes damage to the display elements. Another etchant of iodine/potassium iodide generally known as one of the gold etchants can not give precise etch pattern because of remarkable difference in etching rates among silver, copper and gold. The purpose of this research is to obtain a practical etchant for ACA alloy. The results are as follows. The cyanogen complex salt of gold generates when cyanide is used as the etchant, in which gold dissolves considerably. Oxygen reduction is important as the cathodic reaction in the dissolution of gold. A new etchant of sodium cyanide / potassium ferricyanide whose cathodic reduction is stronger than oxygen, can give precise etch patterns in ACA alloy swiftly at room temperature.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.940-951
• /
• 2011

Reaction of 1-methylpyrimidine-(1H,3H,5H)-2,4,6-trione (1-MBA 1) as an unsymmetrical barbituric acid with cyanogen bromide and various aldehydes in the presence of triethylamine and/or pyridine afforded diastereomeric mixtures of new class of heterocyclic stable 5-aryl-1,1'-dimethyl- and 5-aryl-3,1'-dimethyl-1H,1'H-spiro[furo[2,3-d]pyrimidine-6,5'-pyrimidine]2,2',4,4',6'(3H,3'H,5H)-pentaones which are dimeric forms of 1-methyl barbiturate at the range of $0^{\circ}C$ to room temperature. In the reaction of some aldehydes with 1-MBA and BrCN were afforded a mixture of diastereomers. Another two aldehydes such as 4-cyano- and 2-hydroxybenzaldehydes gave exclusively two diastereomers in which binded to the salt of triethylammonium hydrobromide by intermolecular H-bond in ratio of 1:1. 4-Hydroxybenzaldehyde and 2-pyridinecarbaldehyde gave exclusively one diastereomer under the same condition. Aldehydes possessing strong electron-donor were produced exclusively two geometric isomers of Knoevenagel adduct (E- and Z-isomers). The structures of compounds were deduced by $^1H$ NMR, $^{13}C$ NMR and FT-IR spectroscopy. Mechanism of the formation is discussed.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2009

Methyl Bromide that was used as fumigation gas turned out to be the substance of destroying the ozone layer. For that reason, at the Montreal Protocol in 1987 the use of methyl bromide was forbidden starting 2005 in the advanced country. Also according to the 2007 Bali Protocolly methyl bromide is expected to be forbidden and therefore the purpose of this study is to find out the effects of substitution fumigation gas (Ethylene Oxide+HFC 134a, Methyl Iodide, Cyanogen and Argon) on the metal(silver, copper and iron), wood(oregon pine), pigment(yellow, red, blue, white and black), textile(hemp, ramie, jute, silk1 and silk2 / indigo, safflower and cork) and paper. After the fumigation test, ethylene oxide+HFC 134a did not have changes in the weight and color of the material itself before and after the experiment. On exterior alteration, color change occurred partly on paper and metal. Also, in most materials color change extent was 0.5 to 1.5 on the average and showed scanty difference. The materials after the fumigation test with methyl iodide did not show weight changes after the test. However, color changes more than 1.0 was shown in most of the materials especially in dyed textile material. In blue pigment, the discoloration on the surface could be seen by naked eyes. Fumigation test with cyanogen gas did not show weight changes and discoloration is more than 1.5 before and after the test. The weight changes of test materials with the argon gas was decreased about 3 to 6%. It can be observed that discoloration on paper was generated. Color changes can be seen on jute dyed with safflower and cork for two weeks with argon gas and the extent was 6.3 and 6.0.