• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.572-578
• /
• 2013

Azotobacter vinelandii, a strict aerobic nitrogen-fixing bacterium, has been extensively studied with regard to the ability of $N_2$-fixation due to its high expression of nitrogenase and fast growth. Because nitrogenase can also reduce cyanide to ammonia and methane, cyanide degradation by A. vinelandii has been studied for the application in the bioremediation of cyanide-contaminated wastewater. Cyanide degradation by A. vinelandii in NFS (nitrogen-free sucrose) medium was examined in terms of cell growth and cyanide reduction, and the results were applied for cyanide-contaminated cassava mill wastewater. From the NFS medium study in the 300 ml flask, it was found that A. vinelandii in the early stationary growth phase could reduce cyanide more rapidly than the cells in the exponential growth phase, and 84.4% of cyanide was degraded in 66 h incubation upon addition of 3.0 mM of NaCN. The resting cells of A. vinelandii could also reduce cyanide concentration by 90.4% with 3.0 mM of NaCN in the large-scale (3 L) fermentation with the same incubation time. Finally, the optimized conditions were applied to the cassava mill wastewater bioremediation, and A. vinelandii was able to reduce the cyanide concentration by 69.7% after 66 h in the cassava mill wastewater containing 4.0 mM of NaCN in the 3 L fermenter. Related to cyanide degradation in the cassava mill wastewater, nitrogenase was the responsible enzyme, which was confirmed by methane production. These findings would be helpful to design a practical bioremediation system for the treatment of cyanide-contaminated wastewater.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.88-95
• /
• 2019

This study was conducted to establish the analytical method for the determination of cyanide in blood, urine, lung and skin tissues in rats. In order to detect or quantify the sodium cyanide in above biological matrixes, it was derivatized to Pentafluorobenzyl cyanide (PFB-CN) using pentafluorobenzyl bromide (PFB-Br) and then reaction substance was analyzed using gas chromatography mass spectrometer (GC/MS)-SIM (selected ion monitoring) mode. The analytical method for cyanide determination was validated with respect to parameters such as selectivity, system suitability, linearity, accuracy and precision. No interference peak was observed for the determination of cyanide in blank samples, zero samples and lower limit of quantification (LLOQ) samples. The lowest limit detection (LOD) for cyanide was $10{\mu}M$. The linear dynamic range was from 10 to $200{\mu}M$ for cyanide with correlation coefficients higher than 0.99. For quality control samples at four different concentrations including LLOQ that were analyzed in quintuplicate, on six separate occasions, the accuracy and precision range from -14.1 % to 14.5% and 2.7 % to 18.3 %, respectively. The GC/MS-based method of analysis established in this study could be applied to the toxicokinetic study of cyanide on biological matrix substrates such as blood, urine, lung and skin tissues.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.5 no.1
• /
• pp.57-60
• /
• 2007

Cyanide has been well known from antiquity. Cyanide poisoning causes histotoxic hypoxia--inhibition of mitochondrial cytochrome oxidase with disruption of the ability of cells to use oxygen. The mortality rate is 95% within 30 minutes. Acute cyanide poisoning is mostly the result of attempted suicide, and because of the high doses typically employed it usually is lethal within minutes. Also acute cyanide poisoning leads to a very poor prognosis because medical personnel can't detect cyanide intoxication and so many hospital haven't antidote. We report two cases of cyanide poisoning which responded well to treatment with the Taylor cyanide antidote package.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.135-139
• /
• 2001

According to the requirement of cyanide precipitation-purification technology, adopt the acidized sulfate to precipitate cyanide. Studying the influence of acidity and the dosage of sulfate on precipitation rate of impurity ion in cyanide wastewater, and, on the basis of synthetic precipitation experiments, we obtain principle process of cyanide precipitation-purification to technology.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.4 no.1
• /
• pp.55-57
• /
• 2006

Cyanides and Hydrogen cyanide are used in production of chemicals, electroplating, photographic development, making plastics, fumigating ships, and some mining processes. We experienced of Hydrogen cyanide inhalation injury. A 45-year-old man worked at electroplating. As soon as he mixed sodium cyanide with acid, cyanide produced hydrogen cyanide, occasionally he inhaled Hydrogen cyanide and he lost his consciousness. He was moved to near hospital and took emergency treatment and then was transferred to our hospital. On arrival he had severe dyspnea, metabolic acidosis, and tachycardia. After he was treated with supportive method he recovered his consciousness in 20 hours at emergency room.

• Environmental Engineering Research
• /
• v.11 no.6
• /
• pp.318-324
• /
• 2006

The higher valence state of iron i.e., Fe(VI) was employed for the oxidation of one of an important toxic ion, cyanide in the aqueous medium. Cyanide was oxidized into cyanate, which is 1,000 times less toxic to cyanide and often accepted for its ultimate disposal. It was to be noted that Fe(VI) is a very powerful oxidizing agent and can oxidize most of the cyanide within few minutes i.e., ca 5 mins of contact. The data was obtained by the UV-Visible measurements for the Fe(VI) decomposition. The UV-Visible data was used to evaluate the overall rate constant for second order redox reaction between ferrate(VI) and cyanide. Also the pseudo first order rate constant was calculated as keeping the cyanide concentration in excess.

• Advances in nano research
• /
• v.5 no.1
• /
• pp.27-34
• /
• 2017

One of the methods of removing cyanide from wastewater is surface adsorption. We simulated the removal of cyanide from a synthetic wastewater in the presence of Titanium dioxide nano-particles absorbent uses VISUAL MINTEQ 3.1 software. Our aim was to determine the factors affecting the adsorption of cyanide from synthetic wastewater applying simulation. Synthetic wastewater with a concentration of 100 mg/l of potassium cyanide was used for simulation. The amount of titanium dioxide was 1 g/l under the temperature of $25^{\circ}C$. The simulation was performed using an adsorption model of Freundlich and constant capacitance model. The results of simulation indicated that three factors including pH, nanoparticles of titanium dioxide and the primary concentration of cyanide affect the adsorption level of cyanide. The simulation and experimental results had a good agreement. Also by increasing the pH level of adsorption increases 11 units and then almost did not change. An increase in cyanide concentration, the adsorption level was decreased. In simulation process, rising the concentrations of titanium dioxide nanoparticles to 1 g/l, the rate of adsorption was increased and afterward no any change was observed. In all cases, the coefficient of determination between the experimental data and simulation data was above 0.9.

• Analytical Science and Technology
• /
• v.35 no.4
• /
• pp.153-160
• /
• 2022

A green spectrophotometric method for the determination of cyanide has been proposed using, a green reagent, aqueous extract of blue butterfly pea. The test tube was filled with anthocyanin rich extract (pH 6) and cyanide solution. The reaction was kept constant for 10 minutes at room temperature. The reaction mixture changed color from blue to green as the amount of CN-ions increased. The 620 nm peak intensity increased with CN concentration. Therefore, this wavelength was used for all cyanide analyses. The cyanide calibration curve had a linear range of 0.25-1.00, 1.00-4.00, and 4.00-10.00 mg/L, with a satisfactory correlation coefficient of 0.99 and a LOD of 0.57 mg/L. The recovery ranged from 8.33 to 76.94 percent, indicating that this method is inaccurate at low cyanide concentrations. The intra-day and intermediate precision relative deviations were 0.391-0.871 % and 1.112-1.583 %. An H-bond forms between the C-4 group of the B-carbonyl ring and the HCN molecule according to the B3LYP/TZVP calculation. The method is convenient for cyanide concentrations above the LOQ of 1.09 mg/L, cost-effective, and capable of reducing toxic solvents with acceptable precision. The method could also be used to detect total cyanide in biological, environmental, and industrial waste samples.

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.161-166
• /
• 1982

Cyanide poisoning is expected to be antagonized by the administration of oxygen, when it is administered in combination with the conventional cyanide antidote, sodium thiosulfate. However, the antidotal efficacy and its exact mechanism of oxygen in cyanide poisoning is still a controversial one. To test the effect of oxygen on the antidotal action of thiosulfate in cyanide poisoning, author designed this study on the dose-mortality patterns for potassium cyanide in mice. Potency ratios derived from $LD_{50}$ values were compared in groups of mice treated with sodium thiosulfate alone and sodium thiosulfate with oxygen. These results indicated that oxygen enhances the antidotal effect of sodium thiosulfate, effectively. This fact demonstrates that oxygen is of importance in the treatment of cyanide poisoning.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1068-1077
• /
• 2006

Pseudomonas sp. PhCN strain, which has the potential to utilize phenol and cyanide as a sole carbon and nitrogen source, was isolated. A comparison of the effect of cyanide on phenol degradation and vice versa by strain PhCN showed that the degradation time was significantly delayed by an increase in either phenol or cyanide concentration, and the greatest activities were obtained in basal medium containing a low concentration of cyanide and phenol. This strain contained two plasmids of approximately 120 kb (pPhCN-1) and 110 kb (pPhCN-2). Plasmid curing experiments produced a plasmid-free strain as well as strains containing either the 120- or the 110 kb plasmid. The strains were tested for their ability to utilize phenol and KCN. The results demonstrated that the ability to utilize phenol was encoded by the 120 kb plasmid, whereas the ability to utilize cyanide appeared to be encoded by the chromosome.