• 제목/요약/키워드: Cutting the saplings

검색결과 6건 처리시간 0.023초

뽕나무 묘목생산을 위한 신소삽목 조건 구명 (Studies on the Conditions of Softwood Cutting for Production of Mulgerry Sapling)

  • 구태원;성규병
    • 한국잠사곤충학회지
    • /
    • 제39권2호
    • /
    • pp.101-105
    • /
    • 1997
  • Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.

  • PDF

꾸지뽕나무 묘목생산을 위한 최적 꺽꽂이 조건 (Optimal Cutting Conditions for the Production of Cudriania tricuspidata Bureau)

  • 성규병;김기영;김현복;지상덕
    • 한국잠사곤충학회지
    • /
    • 제50권2호
    • /
    • pp.166-170
    • /
    • 2012
  • 최근 수요가 늘어나고 있는 꾸지뽕나무 묘목의 번식을 위하여, 비교적 용이하고 대량생산이 가능한 묵은 가지 및 새순 삽목법에 의한 안정적인 뽕나무묘목 생산체계를 확립하기 위하여 본 실험을 실시하였다. 꾸지뽕나무의 묵은 가지 삽목 최적조건을 구명하기위하여 삽수의 길이, 굵기, 발근처리제 농도를 달리하여 처리한 결과, 삽수의 길이는 15 cm, 굵기는 중간정도, 발근처리제는 NAA, IBA 다 같이 5,000 ppm에서 가장 발근률이 높고 발근 후의 생장이 좋았다. 또한, 새순 삽목법을 개발하기 위하여, 삽목상의 형태, 차광망의 차광정도, 새순당 잎의 수를 달리하여 삽목 후 발근 및 발근후의 생장을 조사한 결과, 삽목상의 형태는 2중 터널을 설치하고 1.5 m 위에 차광망을 설치하는 B 타입의 경우가 좋았고, 단일 터널 위에 차광망을 설치하는 A 타입의 경우는 발근률이 매우 낮았다. 차광망의 차광정도는 55% 차광구에서 발근이 가장 좋고, 55% 이상이거나 무차광구에서는 발근률이 낮았다.

Effect of consecutive shoot-cutting for 3 years on saplings' sprouting regeneration ability of six deciduous oak species in Korea

  • Lee, Seung-Yeon;Cho, Kyu-Tae;Jang, Rae-Ha;You, Young-Han
    • Journal of Ecology and Environment
    • /
    • 제41권3호
    • /
    • pp.66-71
    • /
    • 2017
  • Background: The sprouts of oak species play an important role in maintaining the oak community in a disturbed environment. In this study, we cut 1-year-old oak in three times during the 3 years and measured the sprout responses to know sprouting ability of six deciduous oaks in Korea. Results: Oak sprouts have appeared in spring and fall, and some of the sprouts had lifespan as short as a month. As the number of cutting increases, sprout number of Quercus acutissima increased whereas the other oak species decreased or died. The average number of sprouts over the 3 years was from 1.4 (Quercus mongolica) to 2.2 (Q. acutissima) per individual. Quercus serrata died after the second cutting, and Quercus dentata died after the third cutting. So, the two species have the lowest sprouting ability among six oak species. The sprouts grew actively during fall and slowly in summer. The sprout length during the 3 years was in the following descending order: Q. acutissima, Quercus aliena, Q. dentata, and Q. mongolica. Sprout of Q. acutissima and Q. aliena generated steadily over the 3 years, and sprout of Quercus variabilis and Q. mongolica was changed by year. After the 3 years, the number of sprouts increased only in Q. acutissima but sprout number of the other five oak species decreased. The sprout length of Q. acutissima, Q. aliena, and Q. variabilis increased, but sprout length of the other three oak species decreased. The average survival rate of saplings over the 3 years was in the following descending order: Q. acutissima, Q. aliena, Q. variabilis, and Q. mongolica. Conclusions: As a result, the sprouting ability of Q. acutissima was the highest. Such level of sprouting ability may be the evidence of how Q. acutissima community exists as a dominant species in a disturbed environment in lowlands of Korea peninsula.

장백산지역(長白山地域) 잣나무-활엽수(闊葉樹) 천연림(天然林) 택벌(擇伐) 적지내(跡地內) 천연갱신(天然更新) 특성(特性) (Natural Regeneration Characteristics of Pinus koraiensis-Broadleaved Forests after Selective Cutting in Mt. Changbai)

  • 김영환;이돈구;강호상
    • 한국산림과학회지
    • /
    • 제94권1호통권158호
    • /
    • pp.6-10
    • /
    • 2005
  • 장백산지역 잣나무-활엽수 천연림에서 택벌 후 28년이 경과한 임분을 대상으로 경과시간이 다른 벌채적지의 천연갱신 유묘와 치수의 동태를 분석하였다. 택벌 후 28년이 경과하는 동안 벌채적지에서는 총 16개 수종의 천연갱신 유묘와 치수가 나타났고, 자연회복 초기의 천연갱신 유묘와 치수의 종 출현 비율은 56%이었으며 갱신수종은 주로 부게꽃나무, 고로쇠나무, 당단풍, 등 단풍나무류와 흰털귀룽, 다릅나무 등이었다. 택벌 후 산림의 자연회복 시간이 증가함에 따라 임내에는 잣나무, 복장나무, 난티나무 등 내음성 수종의 유묘와 치수가 나타났으며 이런한 갱신수종의 출현비율은 천연갱신된 전체 종 수의 75% 이상이었으며, 19년정도 지난 후에는 큰 변화가 없었다. 벌채 적지에서 5~10년 경과하였을때 천연갱신 유묘와 치수의 분포밀도는 ha당 5,500~6,100본으로 비교적 적었고, 벌채 후 15년이 지난 뒤 임내에 나타나는 천연갱신 유묘와 치수는 7,500본/ha 정도로 증가하였고 그 이후에는 변화가 크게 나타나지 않았다.

Site suitability for conifer plantation and a new challenge to utilize deciduous trees

  • NAGASHIMA, Keiko
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2018년도 추계학술대회
    • /
    • pp.24-24
    • /
    • 2018
  • Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

  • PDF

삽목재육묘의 육함에 관한 연구 (Studies on the method of bring to perfectly from defective cutting Sapling)

  • 김문협
    • 한국잠사곤충학회지
    • /
    • 11호
    • /
    • pp.31-44
    • /
    • 1970
  • 접목법에 대체할 수 있는 새로운 상묘의 생산방법으로서 삽목재육묘의 육성법에 대하여 연구하였다. 1. 신소를 삽목하면 15 일후부터 발근하기 시작하여 거의 직선적으로 발근양이 증가하며 삽木 40일후에는 발근수 43본, 총근중 5.4g, 총근장 11.19mm에 달한다. 2. 신소삽목의 활착비율은 56~90%의 범위내에 있고 그 평균은 73% 정도이며 품종별로 보면 개량서반, 일지뢰가 80% 정도로 가장 좋고 시평이 가장 못하다. 3. 품종간에 있어서의 발근량은 개량서반, 일지뢰, 수원상4호, 노상은 거의 같은 정도로 많고 용천추우와 시평은 적다. 4. 발근촉진제는 NAA 0.01~0.02%에 2~3초 침지하며 그대로 삽목하는 것이 발근량도 못하지 않고 또 경제적이다. 5. 삽수의 채취량 증가와 경제적인 이용을 위해서는 1) 50cm 정도의 신소를 채취하여 2본씩의 삽수를 채취하고 중간부의 삽수의 기부는 반드시 절치하에서 절단하도록 할 것이며 2) 50cm 미만의 것도 전부 채취하여 이용한다. 가는 삽수나 생장정지아도 발근량은 약간못하나 상당히 발근하므로 이용가치가 있다. 3) 이렇게 하면 10a당 100,000본 이상의 삽수를 채취할 수 있다. 6. 삽수의 하단은 절치하에서 45$^{\circ}$로 사단한 다음 그 뒷면을 삭제하면 그 발근량을 증가시킬 수가 있다. 7. 재육묘를 육성하기 위한 삽목원묘는 10a당 100,000본을 삽목하여도 묘질은 약간 떨어지지만 실용적으로는 원묘로 이용하는데 별 지장이 없을 정도이다. 8. 삽목시기는 7월 중순까지는 그 시기가 늦어지는데 따라서 묘질은 약간 떨어지지만 충분히 이용가치가 있으므로 6월 상순부터 7월 중순까지사이에 수회에 걸쳐서 삽목할 수 있으며 6월하순이후에는 춘벌상수의 신소를 삽수로 이용한다. 9. 재육묘는 원묘의 중량이 10g 이상인 것은 그 성묘비율이 95% 이상이 되고 5~10g의 작은 원묘는 80% 이상의 성묘비율이 되며 그 묘질도 접목묘와 비슷하다. 10. 원묘를 식재할 때에는 그 묘조는 신조의 기부에 3~4아 남기고 절단하도록 한다. 11. 삽목재육묘의 생산비는 접목묘의 52%이다.

  • PDF