• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.123-129
• /
• 1999

Ball-end milling process is widely used in the die and mold manufacturing because of suitable one for the machining of free-form surface. During the process, the pencil cutting operation can be adopted before finish cut to eliminate overload in uncut area caused by large diameter of ball-end mill. The ball-end mill cutter for the pencil cutting is easily deflected by cutting force due to the long and thin shape, and the tool deflection in pencil cutting is one of the main reason of the machining errors in a free-form surface. The purpose of this study is to find the characteristics of deflected cutter trajectory by constructing measurement system with eddy-current sensor. It was found that the severe reduction of corner radius produced the overcut during the plane cutting. Up cutting method induced the overcut both plane and slope cutting, but down cutting one induced the undercut. From the experiments, down cutting with upward cutting path can generate the small undercut surface.

• 한국환경복원기술학회지
• /
• 제16권4호
• /
• pp.41-52
• /
• 2013

This study was carried out in order to analyze the succession characteristics of the slope of expressways and the results of analysis by collecting and analyzing various literatures and data from 2011 to 2012 and surveying 75 expressway slope, as follows : The construction methods applied to planting the slope of an expressway can be classified into 4 types including 3 Climber planting methods, 8 Vegetation thick-layer spray work methods, 4 Seed spray work methods, and 4 Stabilization work methods. The factors which affect the cover degree of the slope of an expressway were found to be development years, gradient, length, and azimuth. Like surrounding forest areas, the expressway slope was analyzed to begin the plant succession 20, 30, and 40 years after development, and plant succession was developed in diversity in a mixed stand forest according to surrounding forest floors. Species diversity, maximum species diversity, and the evenness of slope facing north were analyzed to be high comparing to those facing east, west, and south according to azimuth of slope. Species diversity, maximum species diversity, evenness of slope, and the plant succession of surroundings were analyzed to be high when the gradient of the slope was less than $40^{\circ}$. The dominant species which success on the slope of an expressway and its surrounding forest area included Miscanthus sinensis var. purpurascens, Zoysia japonica, Pinus thunbergii Parl, Rubus crataegifolius, Lespedeza cyrtobotrya, Amorpha fruticosa, Artemisia princeps var. orientalis, and Oenothera biennis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.259-264
• /
• 1995

Recently, in order to achieve high flexibilty, monitoring and control strategies of a new type have been developed. This paper investigates the fesability of using scoustic emission signal analysis for the detection of built-up edge during machining. Results for maching SM45C steel show that the presence of a built-up edge can significantil affect the generation of acoustic emission in metal cutting. When the cutting speed comes to the conditions conducive to development of built-up edge, it is shown that the slope of curve-fitted AErms signal undergoes a change. The fesability of utilizing AErms in built-up edge sensing is sugested.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.87-96
• /
• 2010

PAP method is a combined measures which consist a anchored retaining wall method with permanent ground anchors and vertical precast concrete panels, step by step on the slope surface. And soil is back filled between slope and vertical precast panels. Therefore, this method is more effective than any other ground anchor reinforcing methods of slope stability, for example cross type concrete block ground anchor or buttress concrete block ground anchor method. Because of increasing effective anchor force and green tree planting.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.974-979
• /
• 2008

The purpose of this study was to evaluate the effect of vegetation on the cutting slope applied by vegetation system in the whole land. The engineering characteristics of slopes were investigated using the face mapping and physical tests. From the statistical methods, a relationship between a geologic stratum and degree of covering was independent. Therefore, the afforestation of slope was affected more by condition of vegetation as direction and opening of joints, and a topsoil state than by conventional classification of layer. It was concluded that the adjustable vegetation on the slope considering condition of geometric shape of slope, joint data and spontaneous type could make useful early afforestation.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.269-294
• /
• 2017

This study aimed to realize the creation of fuzzy stochastic damage to describe reliability more essentially with the analysis of harmony of damage conception, probability and fuzzy degree of membership in interval [0,1]. Two kinds of fuzzy behaviors of damage development were deduced. Fuzzy stochastic damage models were established based on the fuzzy memberships functional and equivalent normalization theory. Fuzzy stochastic damage finite element method was developed as the approach to reliability simulation. The three-dimensional fuzzy stochastic damage mechanical behaviors of Jianshan mine slope were analyzed and examined based on this approach. The comprehensive results, including the displacement, stress, damage and their stochastic characteristics, indicate consistently that the failure foci of Jianshan mine slope are the slope-cutting areas where, with the maximal failure probability 40%, the hazardous Domino effects will motivate the neighboring rock bodies' sliding activities.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.527-531
• /
• 2006

Recently, the development project is conducting disaster effect estimation to breed disaster, and cope these disaster beforehand provoking soil erosion and flood. Therefore, it is became important to analysis and reduce of these disaster. In this study, receive value of LS and C factor of soil erosion through the digital image. The method of photogrammetry was employed for the efficient surveying and analysis of cutting slope using Remote Control Helicopter installed with a nonmetric digital camera. As a result, we obtain more objectivity value of soil erosion factor using digital image analysis.

• 한국조경학회지
• /
• 제20권3호
• /
• pp.33-43
• /
• 1992

The perceptual characteristic on the slope scenery around highway is very similar as the general perceptual characteristic in the landscape. This process determines by the relationship between the scenery observers and the characteristics of its place. It is very important to have a analysis on highway slope scenery in our particular culture in Korea since our country's highways are done by cutting mountains : therefore, we have a lot of slopes around highways. The physical characteristics on the highway scenery determines how we should build scenery around highway to a satisfactory level. The results drawn from this research work are as follow: 1) The satisfaction for slope scene had been affected by sex, native and experience of travel. I thought that the slope scene having peculiar form will offer the highest satisfaction. 2) Psychological factor, reflected satisfaction of slope scene, 몽 a grip of three factors as the factor of evaluation, texture, formation, and presumption formula is : Satisfaction=1.04(Evauluation factor)+0.83(Texture factor)+0.15(Formation factor)+4.28)R2=0.69). 3) Vine among the vegetation componeents of slope scene highly correlated with the evaluation factor and grass, shrub correlated with the texture factor. 4) Rock among the structual components of slope scene highly correlated with the formation factor, and stockade, lattice correlated with the evalution factor. 5) Gradient among the properties which determined slope form, highly correlated with the formation factor.

• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.32-42
• /
• 2005

To investigate the plants invasion process and dominant species in large-scale cutting slopes, slopes elapsed one year to thirteen years after construction had been selected in five counties. The obtained results are summarized as follows : The species of high appearance frequency were Alnus firma, Arundinella hirta, Miscanthus sinensi var. purpurascens, Erigeron cancdensis, Artemisia princeps var. orientalis, Oenothera odorata, Lactuca raddeana, Lactrca indica var. laciniata, Lespedeza bicolor, Youngia sonchifolia, Populus albaglandulosa, and so on. The biological type of identified vascular plants was $Ch-D_1-R_{5-e}$. In time, plant coverage was increased gradually and average of plant coverage was 1.17% in slopes which elapsed one year, 42.44% after six years, 56.67% after eight years, and 69.17% after ten years. The dominant species in the surveyed slopes were covered with Alnus firma, Artemisia princeps var. orientalis, Erigeron cancdensis, Miscanthus sinensi var. purpurascens, Arundinella hirta, Lactuca raddeana, Oenothera odorata, Boehmeria spicata, Kummerowia striata and Artemisia montana of the 59 species. The conditions of location in large-scale cutting slopes are hard to fix and germinate of seeds, and extend plant roots in the slope soil. Hence, the highly appearance species and dominance species of the area will make plant coverage quick and slope stable.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.367-380
• /
• 2024

In this study, a prediction model for the cutting force evolution in brittle rocks was developed. This model is based on indentation tests using a conical pick at a cutting depth of 9 mm. The behavior of the indentation mechanism was analyzed in three phases by using Evans' cutting mode. The peak values in the force history identified these phases. The variation in the local strength of the rock caused a large offset in the model prediction of chipping. Regression analyses showed that there is a strong power relationship between the upper bound of the cutting force along with chipping and depth of cut. The slope of the three crushing phases has been found to increase sequentially (α₁<α₂<α₃). In addition, a positive correlation existed between the Schmidt hardness and brittleness index that affects the lower and upper bounds of chipping. Consequently, the results clearly demonstrate that the new model can reasonably predict the evolution of the cutting force based on experimental data. These results would be beneficial for engineers to design and select the optimum excavation machine to reduce mechanical vibration and enhance cutting efficiency.