• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.79-80
• /
• 2001

This study was conducted to estimate rooting and shooting in single-node cuttings (SNC) of roses 'Rote Rose' and 'Teresa' to several conditions: growth stage, node position, and leaf area of cutting, so that single-stemmed roses (SSR) could be used in rose factory system. There was no effects of growth stage of flowering shoots far cutting on the rooting and shooting of SNC in both of the two cultivars. However, the node position and leaf area of cuttings significantly affected the rooting and shooting of SNC: the speed was accelerated with larger leaf area and upper node cuttings, but the rate showed little difference as above 95%. Based on above results, rooting and shooting in SNC was forced by leaf area mainly, followed by node positions. On the other hand, flowering rate of shoots from SNC was improved mainly with larger leaf area in cuttings. Shoots of 45cm-longer, qualified for rose factory system, increased with lower node and larger leaf area significantly. Therefore, it could be said that the potential growth of shoots from SNC would be influenced mainly by leaf area, followed by node position on cutting.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.598-603
• /
• 2005

Recently, the advanced industries using micro parts are rapidly growing. The appearance of ultra-precision feed mechanism and the development of control system make it possible to process parts in sub millimeter scale by mechanical methods. Micro endmilling is one of the prominent technology that has wide spectrum of application field ranging from macro parts to micro products. So, micro stairs have been trying to cut by using high revolution air turbine spindle and micro-endmill, and studying for magnitude of cutting force. This investigation deals removal characteristics of burr generated by micro endmilling process. Also, decreasing of burr is significant problem in making smooth and precise parts in micro endmilling. In micro endmilling, the material removal rate(MRR) and cutting forces are very small. This paper presents an investigation on the machining characteristics for micro stairs by using ultrahigh-speed air turbine spindle in machining.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.341-344
• /
• 2006

LED chips are produced by cutting the sapphire on which GaN is evaporated. To cut the sapphire wafer into each LED chip, at first the wafer is scribed by diamond tool. To get the sharp groove shape for the nice cutting plane it is important the diamond tool shape, load, etc when the wafer is scribed. Here we tried to simulate the scribing process and get the scribing condition to reduce the wear rate of diamond tool for the sharp groove shape.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1096-1105
• /
• 1994

A hypereutectic Aluminum-Silicon Alloy is widely used in the parts of automobile because of high-resistance and good strength. In this study, the cutting of hypereutectic A1-Si alloy for economical production was investigated by simulation. Tool life and the extraction rate of Si particles is inversely proportional to the depth of cut. When decreasing the depth of cut, the reduction of single crystal diamond tool cost and tool change time is achieved.

• The Korea Journal of Herbology
• /
• v.26 no.2
• /
• pp.11-15
• /
• 2011

Objectives : In the present study, the contents of cinnamic acid and cinnamaldehyde in three different parts of Cinnamomi Ramulus (CR) (the whole body, the bark part, and the wood part) was evaluated using UPLC (ultra performance liquid chromatography) in order to investigate a suitable cutting method. Methods : Analysis was performed on SMART LC with UV detector. Reference compounds were separated on Inertsil ODS-4 column ($2.1mm{\times}50mm$, $3{\mu}m$, GL Science, Japan) using isolation elution with water and acetonitrile each containing acetic acid at a flow rate of $500{\mu}L/min$. Additionally, samples of CR were purchased from pharmacy of medicinal herb. Results : The correlation coefficients of the cinnamic acid and cinnamaldehyde levels showed good linearity ($r^2{\geq}0.9999$) over the linear ranges. Furthermore, the bark part exhibited higher concentration levels of reference compounds than the wood part in all samples. In addition the bark exfoliation rates in oblique and perpendicular-long cut samples of CR were lower than the perpendicular-short cut samples. Conclusions : These results suggested that the optimal cutting method would be able to reduce the bark exfoliation. Therefore, the oblique or perpendicular-long cutting method is considered to be a better cutting type than the perpendicular-short cutting method.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2013

Currently, there was no producing system of TMR for pig feeding in Korea. In this study, we examined unrolling, cutting, and softening for the round bale silage. We designed and developed the prototype system of round bale silage for pig feeding. Unroll method were lower chain conveying and upper belt conveying which includes an hydraulic vertical fodder knife. Gathering and cutting method were rotating auger and flywheel which have 10 cutters, input roller of 280 rpm, and cutter rotating speed of 1,750 rpm. Softening device was rotating hammer in inclined cylinder adjustable to $25^{\circ}C$ and rotating speed up to 1,300 rpm. The prototype system was integrated working for unrolling, cutting, and softening. We found that when the round bale silage in unrolling apparatus cut length of 20 cm to input cutting apparatus, the cutting performance was well in continuous working up to input rate of 1,000 kg/h, the softening apparatus was working well.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.60-65
• /
• 2008

For autumn field cutting of Sedum sarmentosum, the effects of cutting site (distal, middle, and proximal) and planting method (space drill seeding, drill seeding, and broadcast seeding) on survival rate and growth characteristics were investigated at pre- and post-winter season. Plant height root length, stem number per plant, number of branch per plant, fresh weight of shoot, and dry weight of shoot were significantly superior in distal site at pre-wintering (40 days after cutting). At post-wintering (May 10th), stem number per plant, fresh weight and dry weight per $m^2$ in cutting of distal site showed a significant increasement compared to the cutting of proximal site. At pre-wintering (40 days after cutting), the growth in space drill seeding was well than that in drill seeding and broadcast seeding, and fresh weight and dry weight per $m^2$ in space drill seeding were high in order of space drill seeding, broadcast seeding, and drill seeding. At post-wintering (May 10th), stem number per plant, fresh weight and dry weight per $m^2$ in space drill seeding were significantly increased than those in drill seeding. Accordingly, the cutting using distal site of stem in autumn field cutting was desirable for the growth and shoot yield. The space drill seeding showed the highest yield potential among three seeding methods, but broadcast seeding was favorable in saving of labor, because the fresh weight of shoot in broadcast seeding was similar in the space drill seeding at post-wintering.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.466-476
• /
• 1993

Field experiment was carried out to study the new and old leaf development and photosynthesis of sorghum-sudangrass hybrid 855F, pearl millet Suwon No.6 and barnyard millet in cutting and non-cutting plots from the 2nd cutting day(September, 17th). Leaf regrowth of sorghum-sudangrass hybrid and pearl millet begun after the 2nd cutting day, except barnyard millet. Photosynthetic rate of new leaf blades in cutting plots reached to higher level than old leaf at 12th to 20th day after cutting(DAC). Stomatal density of leaf blade of each crop in non-cutting plot was observed higher pearl millet and sorghum-sudangrass hybrid than barnyard millet. New leaf blade of each crop in cutting plot was showed complete development in stomata size, form and vascular bundles in 12th DAC. Non-structural carbohydrates(NSC) contents of stembase in sorghum-sudan hybrid which had 17 %, the highest among three forages decreased daily into 8th DAC and begun to increase from 20th DAC. But, those of pearl millet and barnyard millet in cutting plots were about 10 % at cutting day and inclined to decrease continuously into the 20th DAC and reached about 3～4% in 32nd DAC. These results showed that regrowth energy of sorghum-sudangrass hybrid was mainly dependent on non-structural carbohydrates of stembase until 12th DAC, but pearl millet had active lower leaves supported its regrowth by concurrent photosynthesis. As barnyard millet which did not reserve enough NSC, its regrowth fail to survive under low temperature. Also, late regrowth of rest two forage crops was delayed with decreasing daily temperature after mid-September.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.13-21
• /
• 1985

This experiment was carried out to study the effect of the autumnal cutting times on the regrowth, the accumulated carbohydrate and dry matter yield of Italian ryegrass The results were summarized as follows: 1. In dry matter yield, the plot of earlier cutting was shown the highest yield (p<0.05), and that of the last-cutting was shown lower yield of dry matter than that the none-cutting plot. 2. TSC (Total Water Soluble Carbohydrate) content slightly decreased after the first cutting and gradually increased according to the regrowth, and then decreased again to the second cutting time. And also the TSC content levels of stubble, stem and leaf at one week before falling to sub-zero temperature were all the highest in the eariler cutting plot (p<0.01), and there was significant correlation between the TSC content level and the second harvested dry matter yield (p<0.05). 3. CGR (Crop Growth Rate) was decreased below $8^{\circ}C$. RLGR (Relative Leaf area Growth Rate) and NAR (Net Assimilation Rate) were both high during 30 days after regrowth, and low after regrowth in all plots. LAI (Leaf Area Index) rapidly increased during 50 days after cutting, and then slowly increased in all the plots, and maximum LAI was 3.4-5.8. Also dry matter yield increased in the plots having a high LAI to 70 days after cutting. 4. It was recognized that there were significant correlation between TSC, LAI, CGR, NAR, LWR (Leaf Weight Ratio) and the second harvested dry matter yield during the low temperature periods, and the degree of contribution to dry matter yield was in order of LWR>LAI>TSC>NAR>CGR.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.248-253
• /
• 1997

The ideal surface roughness is obtained by tool geometry and feed rate in face milling. however actual surface roughness is affected by various factors such as cutting conditions. vibration and used tool. To improve the quality and productivity of the machining parts, lots of research on the evaluation of tool life and control of surface roughness has been required. Therefore, the width of flank wear, cutting force, and surface roughness are monitored to analyse the characteristics of surface roughness. This experimental investigation is mainly focused on the characteristics of surface roughness in multi-insert milling using TiN coated tool.