• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.15-28
• /
• 1998

Recently may investigations have been studied on the high-speed machining by using machine tools. A CNC machine tool makes some tool path errors caused by software acceleration/deceleration. The faster a cutting feedrate is, the bigger the tool path errors are. Some known methods reduce these kinds of errors, but they make the total cutting time increased. This paper presents a feed-forward algorithm that can be generated by distorting the original tool path, and reduces the tool path errors and the total cutting time. The algorithm to generate a new tool path is represented as following; 1)calculating each distance of software acceleration/deceleration between two adjacent blocks, 2) estimating the distorted distance which is the adjacent-ratio-constant(k1, k2) multiply the distance of software acceleration/deceleration, 3) generating a 3-degree Bezier curve approximating the distorted tool path, 4) symmetrically transforming the Bezier curve about the intersection point between two blocks, and 5) connecting the transformed Bezier curve with the original tool path. The algorithm is applied to FANUC 0M. The study is to promote the high-precision machining and to reduce the total cutting time.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.345-360
• /
• 2019

The shear keys are set in a seismic isolation system to resist the long-term service loadings, and are cut off to isolate the earthquakes. This paper investigated the influence of shear keys on the seismic performance of a vertical spring-viscous damper-concave Coulomb friction isolation system by an incremental dynamic analysis (IDA) and a performance-based assessment. Results show that the cutting off process of shear keys should be simulated in a numerical analysis to accurately predict the seismic responses of isolation system. Ignoring the cutting off process of shear keys usually leads to untrue seismic responses in a numerical analysis, and many of them are unsafe for the design of isolated structure. And those errors will be increased by increasing the cutting off force of shear keys and decreasing the spring constant of shear keys, especially under a feeble earthquake. The viscous damping action postpones the cutting off time of shear keys during earthquakes, and reduces the seismic isolation efficiency. However, this point can be improved by increasing the spring constant of shear keys.

• Restorative Dentistry and Endodontics
• /
• v.16 no.2
• /
• pp.197-212
• /
• 1991

The purpose of this study was to roughness on the polished surface of visible light composite resins and was to observe the polished surfaces under Scanning Electrom Microscope(ISI DS 130 AKASHI Co. JAPAN). The surface roughness tester(Surfcom 700A Seimtsu profilometer Tokyo, Japan) was used to measure roughness of polished surfaces. In this study, 5 brands of visible of composite resins were examined, Pyrofile light bond Anterior Lite fil anterior Photo clearfil anterior & posterior Palfique light Anterior and posterior Silux Anterior. White point, Silicure point, Super snap Sof-Lex medium disk as cutting instrument, and celluloid matrix were used. The results obtained were as follows. 1. The Celluloid matrix produced the smoothest surfaces. 2. The surfaces made by Soflex medium disk was smoother than the surfaces made by any other polishing instruments. 3. The values of surface roughness made by White point, Silicon point and Super snap were similer. 4. Palfique light (AP) visible light composite resin showed the smoothest surface after polishing with Silicone point, Super snap disk and Soflex mediuem disk in all tested materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.319-320
• /
• 2007

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.943-946
• /
• 1998

In this paper, we applied FFT to PCB Images, cutting unnecessary singals and noise, moving the starting point to center of image and used rotaion transform. from the detected edge Hough Transform identify the length, but not the angle, so we matched PCB images with using rotation transform to identify length and angle. After rotation transform we employ Least Squared Method to exact stereo matching.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.262-267
• /
• 2003

At process of production according to development of accumulation degree of semi-conductor element, because functional mistake examination time required increases, is becoming big obstacle factor in cost-cutting. Studied pattern generator that generate pattern and address that is bundle enemy to process these controversial point effectively.

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.695-701
• /
• 2009

This study was performed to evaluate the effectiveness of biological critical control points using the genetic profile of Escherichia coli isolates from pork cutting plants. Samples were collected from carcasses, equipment (knife, table, glove, transport belt, boning and skinning machine), the environment (wall and floor), and meat cuts during the cutting process from two plants. Pulsed-field gel electrophoresis (PFGE) was used to characterize the E. coli isolates. An identical genotype was detected from the carcasses, equipment, environment, and final meat cuts, and showed that the incoming carcasses, which were contaminated during transportation from slaughterhouses, were a major source of E. coli that was spread throughout processing. Also, consistent cross-contamination due to improper cleaning and disinfection procedures was another possibility. As a result, incoming carcasses and cleaning procedures should be considered critical control points in pork cutting plants, since a heating step is not used to inactivate microorganisms. Furthermore, the high rate (59.6%) of E. coli isolation indicates E. coli can be a good indicator in livestock processing plants even though it has genetic diversity.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.139-145
• /
• 1996

The machining accuracy and performance is largely influenced by the static, dynamic and thermal characteristics of spindle systems in machine tools, because the spindle system is a intermedium for cutting force from tool and machine powef from motor. Large cutting force and power are transmitted by bearing with a point or line contact. So, the spindle system is the static and dynamic weakest point in machine structure. For improvement of static stiffness of spindle system can be changed design parameters, such as diameter of spindle, stiffness of bearing and bearing span. But for dynamic stiffness, the change of the design parameters are not useful. In this paper, the combined bearing arrangement is suggested for high damping spindle system. The combined bearing arrangement is composed of tandem double back to back arrangement type ball bearins and a high damping hydrostatic bearing. The variation of static deflection and amplitude in first natural frequency is evaluated with the location of hydrostatic bearing between front and rear ball bearing. The optimized location of hydrostatic bearing for high static and dynamic stiffness is determined rapidly and exactly using the mode shape and transfer function of spindle. The calculation of damping effect on vibration by unbalance of grinding wheel and pulley in optimized spindle system is carried out to verify the validity of the combined bearing arrangement. Finally, the simulation of grinding process show that the surface roughness of workpiece with high damping spindle system is 60% better than with ball bearing spindle system.

• The Research Journal of the Costume Culture
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2016

Despite both domestic and overseas markets are depressed due to the global financial crisis - the apparel industry is no exception, the market for the outdoor wears including the hiking ones has been recording a high growth rate, making the outdoor wear a high growth industry. The purpose of this study was to provide some basic data useful to our outdoor businesses to help them respond to consumers' needs in the rapidly growing outdoor markets. For silhouettes, the point was given primarily to the oblique cutting to have it follow the human body curves and thereby, look natural and slim. Another point was given to the color schemes along the cutting lines, so that an effect of optical illusion could be created to make the wears look slim making use of lines and colors. On the other hand, in consideration of the rapidly changing weather conditions during hiking, the details were designed practically by setting appropriate hip lengths, using attachable/detachable hoods as well as applying the Velcro & rubber band-type set-in sleeves for the tail edges. As discussed above, the researcher analyzed the design elements for the outdoor wears and developed some sensuous designs meeting consumers' needs to help our outdoor wear businesses to expand their target base, while awakening them of the importance of the outdoor fashion.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.53-61
• /
• 1999

The use of thick plate in increasing in recent years due to the rapid expansion of chemical plants, nuclear plants, ships and other industrial plants. Welding is the most popular joining techniques employed in manufacturing industrial machineries and structures. Normally, Groove shapes are prepared according to appropriate rules and regulations such as KS, JIS, AWS, LR, DNV and etc. for various thicknesses of plate. However those groove angles tend to be too large. As a result of large groove angle, residual stress, deformation of material and strength reduction is obtained. Therefore, the reliability and safety of structures and machinery tend to be decreasing. Therefore, in this paper, theoretical as well as experimental study are carried out to find optimum groove shapes for T-welded joint of mild steel. The test specimen are made in same condition with simulation model. Welding residual stresses measurement by sectional cutting method. ⅰ) The mechanical difference for change the thickness of plate and groove angle are not appeared. ⅱ) In a mechanical point of view minimum preparation angle(40°) is more suitable than maximum groove angle(60℃). ⅲ) The measurement value and distribution of welding residual stresses are not effected largely by groove angle. It is mechanical restraint that mainly affect welding residual stresses distribution. In mechanical point of view minimum groove angle is more suitable than maximum groove angle. Therefore, it is appropriate to minimize the size of groove shape in strength and safety.