• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.88-96
• /
• 2009

This study proposes a wireless measurement system that is a new safety management system by using an FBG sensor and a PDA. The sensor part has many advantages of implementing a wireless measurement system, and the study emploies an FBG-LVDT sensor, FBG-STRAIN sensor, FBG-TEMP sensor, and FBG-ACC sensor, using FBG sensors. Also, the study show a configuration of a signal process system for operating a wireless transmission system of FBG sensors applied to the signal process system, and engrafted the cutting edge information technology industry in order to display from a remote distance using a PDA. In order to verify the applicability of the developed FBG sensors and wireless measurement monitoring system to the field, their accuracy, and usability, the study has conducted a static and dynamic test to a bridge in the field. The study made an assessment of service for the vibration of the bridge by applying dynamic data measured by an FBG-LVDT sensor and FBG-ACC sensor to Meister's curve and prepared methods for assessing the vibration of the bridge by proposing a standard of vibration limitation given the service of vibration of the bridge. As a follow up for this study, it would be necessary to set up an overall model for the standard of service assessment established in this study.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.21-35
• /
• 2007

Objectives : The aim of this study is to find the therapeutic meaning of the Portulacea in herbal medication. Methods : About the origin, the component, the processing the drug, the properties and tastes of drugs, the meridian tropism, the effects, the treating disease, the contraindication and the method of administration, I have researched thirty literatures to mention the Portulacea in time sequence. Results : 1. The Portulacea belongs to the Portulacaceae herbs and it consists of noradrenaline, potassium sometimes containing small amounts of dopamine, dopa, malic acid, citric acid, glutamine acid, asparagin acid, alanine, cane sugar, grape sugar, fruit sugar. 2. The processing of drug is wash of water clealy, and remove the foreign substance. Then the drug is cutting to use. The method of burnt to ashes is used, too. 3. The properties and tastes of drugs is acid, cold, nontoxic. The meridian tropism is mainly liver and the large intestine meridian. 4. From old times, Portulacea has come into general use to treat eczema, the rose erysipelas, an acne, hemorrhoids, discharge from the womb etc. because it is effective on neutralizing poison, reduce a swelling, a tumor, an abscess and stopping of bleeding 5. Portulacea must be stoped When person have a weak digestive organ becase it is cold herba. And don't take use with Fish and shellfish. 6. Portulacea is useful method to external care. To use the herba, pulverize amount of property and then apply to the the affected part Conclusions : This study showed that the Portulacea is useful herb to treat of skin disease and useful method to external care.

• Korean Journal of Environment and Ecology
• /
• v.17 no.2
• /
• pp.144-152
• /
• 2003

The purpose of this study was to investigate the effects of lime fertilization and light intensity on beech regeneration strategy in a mature beech forest(ca. 150 years old) gaps, which was located in the soiling areas Germany, where the soil is an acid brown earth. For the experiment canopy gaps of 30m diameter were cut, and one canopy gap remained as untreated while the other was limed(3t dolomite h $a^{-1}$). Soil chemistry, soil water potential, light intensity(PAR), ground vegetation, beech seedlings and mycorrhiza were investigated along transect from the stands into gaps to the north. The results of this study are followings: 1) In the limed gap, soil chemistry was greatly improved and a vigorous herb layer developed as compared to the unlimed gap. 2) Development and growth of the beech seedlings in the unlimed gap were generally deficient. Specially, developments of lateral roots were very lack. 3) Through the lime fertilization, the minerals contents of beech leaves such as calcium(Ca) and magnesium(Mg) were increased, while manganese(Mn) was decreased. There was antagonism between potassium(K) and calcium(Ca) or magnesium(Mg). 4) The relative mycorrhiza frequency(RM) in beech seedlings of the southern edge was very higher than that of the middle part, and through the lime fertilization extension of the species Laccaria amethystina appeared clearly. The results of this study showed that lime fertilize in forest, where the soil is acid, will be necessary..

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.53-62
• /
• 2014

In Korea, in general, separation distance between existing parallel tunnels was set at two to five times as distant as the diameter of the tunnels according to ground conditions. Recently, however, actual applicability of closely spaced parallel tunnels whose distance between tunnel centers was shorter than the diameter has increased due to environmental damages resulting from massive cutting, restriction in purchase of required land, and maintenance of linear continuity. In particular, when the pillar width of tunnel decreases, the safety of pillars affects behaviors of the tunnel and therefore the need for diverse relevant studies has emerged. However, research so far has been largely confined to analysis of behavior characteristics of pillars, or parameters affecting design, and actually applicable and quantitative data have not been presented. Accordingly, in order to present a stability evaluation method which may maximally reflect construction conditions of spots, this study reflected topographical and stratigraphic characteristics of the portal part with the highest closeness between the tunnels, simulated multi-layer conditions with rock mass and complete weathering, and assessed the degree of effect the stability of pillars had on the entire tunnels through numerical analysis according to changes in pillar width by ground strength. This study also presented composite analysis result on ground surface settlement rates, interference volume rates, and average strength to stress and a formula, which may be applicable to actual work, to evaluate safety rates of closely spaced parallel tunnel pillars and minimum pillar width by ground strength based on failure criteria by Hoek-Brown (1980).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.135-139
• /
• 2018

This study was conducted to evaluate the forage production and feed value of Sasa borealis (S. borealis) in Jeju Island in order to improve the utilization of Sasa borealis and to help mitigate the problem of reduced plant species diversity caused by S. borealis in Hanlla Mountain. To investigate the forage production, three quadrat structures were installed in the S. borealis natural community in the middle part of Hanlla Mountain. From May to October 2017, S. borealis in quadrats was cut at a fixed time of each month, and then forage production and regenerated acidity per kg/ha were evaluated. For the evaluation of feed value, compositional analysis was performed on the monthly samples. In vitro digestion experiments were carried out using cannula mounted Hanwoo. In vitro neutral detergent fiber digestibility(IVNDFD) and in vitro acid detergent fiber digestibility(IVADFD) were measured after the experiment. Forage production of S. borealis showed relatively good regeneration ability in May and June, but the regeneration ability decreased as the cutting was repeated. In order to use S. borealis as a forage, it is considered efficient to feed black goats with good fiber decomposition or horses good palatability to S. borealis and relatively good digestibility.

• Resources Recycling
• /
• v.3 no.2
• /
• pp.28-34
• /
• 1994

A part of used cables, such as electric and communication cables has already been recycled by using simple processing methods. However, it has been found that the main problems in recycling of the used cables are insufficient treatment of fine stranded wires and low recovery of copper by air separation process. It has been shown that copper can be effectively separated from the PE using a solvent treatment method. In the present study, the used communication wires having diameter of 0.4 mm are treated in the mixing solution of toluene and water at $86^{\circ}C$ for about 10 minutes. In the solvent treatment, the copper wires recovered have 10~15mm length, which are much longer than that of 1~2mm length copper wires recovered by air table concentration method used in current recycling plants. The process consisting of cutting, air separation and electrostatic separation would be recommendable for the treatment of mixed cables. In this investigation, fine copper powders can also efficiently be recovered from insulation materials using electrostatic separator at the conditions of 20~50RPM roller speed and 15~30KV high DC power.

• Applied Biological Chemistry
• /
• v.20 no.3
• /
• pp.263-269
• /
• 1977

In order to establish methods of potato processing for mixed cooking with rice as main diet, fundamental research was carried out. On the basis of the previous experiments about potato granules, the yield of products, the process of manufacture, and its economics were determined The results are the following. 1. Yield of products are; (1) 22.2% under dipping treatment in $K_2S_2O_5$ solution. (2) 21.7% under dipping treatment in HCI solution. (3) 20.5% under blanching treatment in boiling water. (4) 19.9% under dipping treatment in boiling $K_2S_2O_5$ solution. (5) 18.7% under dipping treatment in boiling HCI solution. 2. The processing of potatoes is as follows $raw\;materials{\to}peeling{\to}cutting{\to}treatment$ for polyphenol oxidase $inactivation{\to}drying{\to}products$. 3. Potato granules are ordinarily not commercial when compared with rice, however, there are times when it is. When rested laud is planted with potatoes a high yield is produced. This will lower the price of the potato and make it commercial compared with rice.

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.403-410
• /
• 2009

The two-dimensional bin packing problem(2D-BPP) has been known to be NP-hard, and it is difficult to solve the problem exactly. Many approximation methods, such as genetic algorithm, simulated annealing and tabu search etc, have been also proposed to gain better solutions. However, the existing approximation algorithms, such as branch-and-bound and tabu search, have shown the low efficiency and the long execution time due to a large of iterations. To solve these problems, we first define the fitness function to simplify and increase the utility of algorithm. The function decides whether an item is packed into a given area, and as an important information for a packing strategy, the number of subarea that can accommodate a given item is obtained from the variant of the fitness function. Then we present a heuristic algorithm BF for 2D bin packing, constructed by the fitness function and subarea. Finally, the effectiveness of the proposed algorithm will be expressed by the comparison experiments with the heuristic and the metaheuristic of the literatures. As comparing with existing heuristic algorithms and metaheuristic algorithms, it has been found that the packing rate of algorithm BP is the same as 97% as existing heuristic algorithms, FFF and FBS, or better than them. Also, it has been shown the same as 86% as tabu search algorithm or better.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.42.1-42.1
• /
• 2016

The formation process and the dynamical properties of a large-scale quasi-circular flare ribbon were investigated using the SDO AIA and HMI data along with data from RHESSI and SOT. Within one hour time interval, two subsequent M-class flares were detected from the NOAA 12371 that had a ${\beta}{\gamma}{\delta}$ configuration with one bipolar sunspot group in the east and one unipolar spot in the west embedded in a decayed magnetic field. Earlier M2.0 flare was associated with a coronal loop eruption, and a two-ribbon structure formed within the bipolar sunspot group. On the other hand, the later M2.6 flare was associated with a halo CME, and a quasi-circular ribbon developed encircling the full active region. The observed quasi-circular ribbon was strikingly large in size spanning 650" in north-south and 500" in east-west direction. It showed the well-known sequential brightening in the clockwise direction during the decay phase of the M2.6 flare at the estimated speed of 160.7 km s-1. The quasi-circular ribbon also showed the radial expansion, especially in the southern part. Interestingly, at the time of the later M2.6 flare, the third flare ribbon parallel to the early two-ribbon structure also developed near the unipolar sunspot, then showed a typical separation in pair with the eastern most ribbon of the early two ribbons. The potential field reconstruction based on the PFSS model showed a fan shaped magnetic configuration including fan-like field lines stemming from the unipolar spot and fanning out toward the background decayed field. This large-scale fan-like field overarched full active region, and the footpoints of fan-like field lines were co-spatial with the observed quasi-circular ribbon. From the NLFF magnetic field reconstruction, we confirmed the existence of a twisted flux rope structure in the bipolar spot group before the first M2.0 flare. Hard X-ray emission signatures were detected at the site of twisted flux rope during the pre-flare phase of the M2.0 flare. Based on the analysis of both two-ribbon structure and quasi-circular ribbon, we suggest that a tether-cutting reconnection between sheared arcade overarching the twisted flux rope embedded in a fan-like magnetic field may have triggered the first M2.0 flare, then secondary M2.6 flare was introduced by the fan-spine reconnection because of the interaction between the expanding field and the nearby quasi-null and formed the observed large-scale quasi-circular flare ribbon.