The high-precision laser scriber carries out scribing alumina ceramic substrates for manufacturing ultra-small chip resistors. The ceramic substrates are loaded, aligned, scribed, transferred, and unloaded. The entire process is fully automated, thereby minimizing the scribing cycle time of the ceramic substrates and improving the throughput. The scriber consists of the laser optical system, pick-up module of ceramic substrates, pre-alignment module, TH axis drive work table, automation module for substrate loading / unloading, and high-speed scribing control S/W. The loader / unloader unit, which has the greatest influence on the scribing cycle time of the substrates, carries the substrates to the work table that carries out the cutting line work by driving the X and Y axes as well as by adsorbing the ceramic substrates. The loader / unloader unit consists of the magazine up / down part, X-axis drive part for conveying the substrates to the left and right direction, and the vision part for detecting the edge of the substrate for the primary pre-alignment of the substrates. In this paper, the laser scribing machining simulation is performed by applying the instrument mechanism of each component module. Through this study, the scribing machining process is first verified by analyzing the process operation and work area of each module in advance. In addition, the scribing machining process is optimized by comparing and analyzing the scribing cycle time of one ceramic substrate according to the alignment stage module speed.
This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.
폴리메틸메타클릴레이트(PMMA)는 광 관련 부품제조에 있어 중요한 재료로 많이 사용되고 있다. 특히 TV, 모니터, 휴대폰 등에 쓰이고 있는 디스플레이의 도광판(Light Guide Panel)에 적용되고 있어 현재까지는 매우 큰 상업적인 수요가 있다. PMMA 도광판의 가공은 일반적으로 고속밀링에 의해 이루어지는데 부품에 대한 높은 정밀도 요구특성에도 불구하고 가공표면의 굴곡, 균열 등에 대한 불량이 적지 않게 발생하고 있다. 이러한 문제점을 해결하기 위하여 PMMA 진동을 부가하는 고속선삭의 적용이 시도되었으며 절삭공구에 진동을 부가하기 위한 장치와 최적 조건이 조사되었다. 도광판용 PMMA의 진동절삭은 일반적인 밀링가공법에 비해 절삭력의 현저한 감소, 열변형영역의 축소 등을 유도하였다. 가공면에 있어서는 가공방법이 엔드 밀링에서 단인공구를 사용하는 선삭으로 변경되었음에도 불구하고 진동절삭법에 의해 가공표면의 균일성이 크게 향상되어 가공면의 표준편차 $1.0{\sim}6.0{\mu}m$, 평균거칠기 $0.3{\mu}m$가 달성되었다.
This study examined the distribution, population and vegetation structure of Corylopsis coreana in South Korea. C. coreana is distributed around the Suncheon area, Jeollanam-do, on the southern part of the Korean Peninsula, but the species is also found in Pocheon and Gangneung, on the central and central east parts of the peninsula. This discontinuous pattern of distribution is coupled with the unusual feature of only growing on northern exposed slopes. The mean density of C. coreana populations is 35 individuals per 100 $m^2$, ranging up to a maximum of 92 individuals per 100 $m^2$. Cut specimens sprouted a maximum of 38 stems per plant. Based on DCA analysis, the species' habitats was divided into three types by species composition and stratification structure. These types include: habitats affected strongly by human activities, valley and mantle communities which are affected relatively little by human activities, and stable forests. Populations affected by artificial intervention have actually flourished, while some populations in the stable forest system have declined. We conclude that the species, now endangered, should be maintained by means of specific external interventions such as cutting or removal of the canopy. To this end, further ecological data should be collected through monitoring and research to identify appropriate interventions to support threatened C. coreana populations.
The goals of this study are to suggest the guidance for automated clothing manufacture by analysis the technology of the automated manufacturing facilities and to propose how improve the efficiency of the production planning and management for automated clothing manufacture In this study, the research about the automated clothing manufacturing machines and the analysis about the modules and functions of apparel information systems were performed. In order to understand the factory automation of the larger clothing firms, the case study method was used. The case study samples were 3 clothing firms. The results and suggestions are as follows: 1. An information technology for automated clothing manufacture has enabled the computer integrated manufacturing system to connect production planning and management part with each work station on the factory floor. 2. The apparel information system to integrate and manage manufacturing informations from each workstation and the apparel CAD system are used in the department of production planning. At the cutting room, there are automated manufacturing machines like an automatic spreading system and an automatic cutting system. Sewing room has the computer controlled unit production system and semi-automated sewing machines. In addition, in the finishing room, an automatic packing machine and a press system are used and besides a warehousing system has been developed. Considering these available technology, for better product efficiency, it is necessary to consider and utilize the specific character of these automatic manufacturing machines and computer system whether they proper to each product style. 3. Most of the clothing manufacturers are in the stage of semi-automated manufacture. In order to improve the manufacturing environment, it is needed to gradual procedure of manufacturing automation with considering the firm's financial condition, existing facilities and staffs operating machines. The case study sample firms are in the high degree of manufacturing automation. They can accomplish the flexible manufacturing system to link the information system with each work station menufacturing system by computerized control. For the case of the firm having already used the computer integrated manufacturing and managing system, it is necessary that the function to deal with drawing information is added to the retaining module of the apparel system.
농산폐자원을 이용하기 위한 방법으로써 Trichoderma sp. KI 7-2로 만든 koji와 내열성 효모를 사용하여 동시당화-발효와 당화액 발효를 비교하였다. 볏짚의 당화액에서는 15 mg/$m\ell$의 cellobiose가 존재하였으나 동일한 효소원을 사용한 동시당화-발효액에서는 존재하지 않았다. 효소당화법에서 는 cellulase enzyme system의 반응산물인 glucose가 cellobiose의 활성을 저해하므로 cellobiose 가 축적되었으나 동시당화-발효법에서 는 glucose가 ethanol로 발효되어 cellobiose의 축적이 없었다. Cutting mill 한 볏짚은 동시 당화-발효 과정에서는 ball mill 한 것과 같은 정도로 효과적으로 발효되었다. 이 결과로부터 cellylolytic enzyme system의 반응산물에 의한 저해 mechanism을 논의하였다. 또한 볏짚 당화시 약 10 mg/$m\ell$ 생산되는 xylose는 동시당화-발효에 아무런 영향을 미치지 않음을 확인하였다.
The purpose of this paper on Hoe (raw beef) is to investigate various kinds of its recipes, with equal focus on seasonings and sauces as well as its main and sub ingredients. The recipes of Hoe can be broadly classified into four large groups such as Salkogi Hoe(Red meat Hoe), Hankazi Naechang-yook Hoe(made from internal organs), Jap Hoe(1)(miscellaneous Meat Hoe) and Jap Hoe(II)(rolled with a whole pinenut) while the cook books written before 1945 indicate that the number of recipes reaches up to 21. The recipe of Salkogi Hoe comprises following three steps. Cut raw beef into thin strips and season them if necessary, then sprinkling sufficient pinenut powder on the strips. Its main sauce is hot pepper paste with vinegar. The recipe of Hankazi Naechang-yook Hoe uses kidney, manyplies, liver and tripes as main ingredients. Kidney should be thinly sliced with mixture of salt, seasame salt, seasame oil, and pepper as its seasonings. Regarding Manyplies, liver and tripes, there exists two possible ways to season them after cutting into strips. You can season with sesame oil and pepper or only with salt. Main ingredients of Jap Hoe(I) consist of beef, pork, kidney, manyplies, liver and tripes, among which minimum two ingredients are selected. Ingredients selected are sprinkled with pinenut powder after cutting into thin strips. And Hot pepper paste with vinegar is used as main sauce. The recipe of Jap Hoe(II) is to cut manyplies into pieces of 2Cm by 5 Cm without removing their black part and roll each piece with a whole peanut in such a manner that the peanut sticks from rolled piece.
Kim, Myeong Seok;An, Ho Sub;Kim, Gil Ja;Kim, Yong Soon;Choi, Jin Gyung;Kim, Dong Kwan;Park, Heung Gyu;Kim, Hyun Woo;Kim, Seong Il
한국작물학회:학술대회논문집
/
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.226-226
/
2017
This study was to evaluate methods to high quality food ramie rice cake, thereby increasing farm income. This study investigated the effects of different covering material on stable winter survival management with edible leaf in Ramie(Boehmeria nivea L.). The method of winter survival with covering material were conducted under three condition compose to Non covering, Rice straw cutting covered with 500kg.10a-1, Rice husks covered with 1,000kg.10a-1(covered 4~5 cm thickness in the soil surface). Method of application were standard application(N-P-K-Compost applied at 27-9-27-600kg.10a-1. Compost and fused phosphate applied at 100% of basal fertilizer in March 25. 20% of top dressing were four times application in March 25 - October 5. Planting year were March 15, 2011. Plants were spaced 60 cm apart in rows 25 cm apart with open cultivation. According to non covering < Rice husks covered with 1,000kg.10a-1 < Rice straw cutting covered with 500kg.10a-1 cultivation this order, aerial part as a result were plenty amount of growth. Sprout time and winter survival rates was uncovering control plot compared to 2 - 5 days quickly, 45-57% highly by rice husks and rice straw covering. Green leaf yields is untreated control plot (12,44 kg.10a-1) compared to rice husks covering 7% higher, and rice straw covering increased to 18% of the most.
Symbolism found in a certain object inherits characteristics from the culture that contains the objects. The purpose of this study was investigate the formative beauty of Korean trousers twisted the pieces together based on the way of Korean thinks and the Topology. The shape is formed by cutting from the fabric. From the perspective of semiology, the fabric and the pattern shape correspond to ground and figure. Ground and figure are identical with the principle of the whole and the part, which is the same in Korea, China, and the West. But In Korea, the 3-dimensional garment is made by adding a twist. This is very important and defines the difference in the way of thinking and topology. Korean trousers consist of three parts : Hury, Marupok, and Sapok. The small Sapok can be made by removing the Marupok and large Sapok (figure) from the fabric (ground) when making Korean trousers. A Mobius strip is made when the large Sapok is adjoined with the small Sapok by reversing the small Sapok, making a 180$^{\circ}$twist and then stitching together. The theory of Mobius strip can be applied in Joining Bajiburi. thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strop. The theory of Mobius strip can be applied in Joining Bajiburi, thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strip. Hury is cylinder while the small and large Sapok make up the Mobius strip. As a result, Mobius strip, Kleins'bottle, protective plan can be applied in cutting Hanbok used in the countryside, so I have come to see that the traditional Korean way of thinking is closely related to the theory of topological.
Measuring method being applied for off-shore works is performed by using data logger or manual measuring instrument with wiring the cable connected from the sensor up to the position where measuring is allowed.(upper part of embankment or marine structure) Measuring management by using existing measuring method may be acceptable on the condition that the ground deformation volume(vertical, horizontal) is generally minimal and the site condition is good. But loss of measuring instrument, sensor cable failure or cutting is taken place frequently due to significant change of ground behavior caused by an external force change(embankment, excavation) under very soft ground condition(N value below 0-4). In case of the marine works, in particular, loss rate of measuring instrument is highly represented due to the factors of working barge anchoring, constructional interference and natural disaster. In order to solve these problems, measuring management was performed with employing underground wireless system at the immersed tunnel site. Measuring data was obtained freely under the marine environment by using underground wireless communication and cable cutting potential by ground behavior could be reduced. Measuring cost savings and its installation convenience were maximized by way of off-shore tower installation or cabling and by minimizing constructional interference of off-shore working barge. This case of measuring management was accomplished successfully.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.