• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.167-174
• /
• 2003

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the measurement of the mold of the shoes in use, the modeling by CAD/CAM system, the generation of NC data and the machining by CNC machining center. The machining has been performed from the data type obtained from 3-dimensional measurement points of mold in use. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method has proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.1
• /
• pp.24-31
• /
• 2005

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the pattern design for the outsole of shoes by CAD, the modeling and the generation of NC data by CAM system and the machining by CNC machining center. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method showed the possibility coping with the rapid change of shoes industry and proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.223-235
• /
• 2002

This paper presents some indirect physical evidences indicating that reduced friction occurs in an economical cryogenic machining process, in which LN2 is applied selectively in well-controlled jets to the localized cutting zone. These evidences include cutting force components, tool wear rate and chip morphology. LN2 reduced the tool wear rate to a great extent and elongated the tool life up to four times compared to emulsion cooling. The friction reduction was further reflected in larger shear angle and less secondary deformation in the chip microstructures. This study also found that the effectiveness of LN2 lubrication depends on the approach how LN2 is applied.

• The Mathematical Education
• /
• v.40 no.2
• /
• pp.335-343
• /
• 2001

Algebra is important part of mathematics education. Recent days, many mathematics educators emphasize on real world situation. Form real situation, pupils make sense of concepts, and mathematize it by reflective thinking. After that they formalize the concepts in abstract. For example, operation in numbers develops these course. Operation in natural number is an arithmetic, but operation on real number is algebra. Transition from arithmetic to algebra has the cutting point in representing the concepts to mathematics sign system. In this note, we see the cognitive tendency of 10th grade about operation of real number, their cutting point of transition from arithmetic to algebra, and show some methods of helping pupils.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.22-28
• /
• 1995

Micro Drills have found ever wider application. However micro drilling is a machining to integrate the difficult machinablities such as tool stiffness, position control and revolution accuracy, and is known to cost and time consuming. So, this study aimed to practice ultraminiature drilling(0.05 .phi. ) wiht simple component, if possible. System is developed as the three modules : feed drives, spindle and monitoring part. The dynamics of measured current signals from the spindle of Micro Hole Drilling machine are investigated to establish the criteria of stepfeed mechanism. Cutting experiments identify the relationship of spindle rpm, feed rate and tool life. The smaller drill diameter is, the more suitable cutting condition have to be selected because of chip packing.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.162-167
• /
• 2016

This study was carried out to investigate proper stem cutting position and air temperature to regenerate roots from cuttings of bitter gourd. 'NS454' (NS) and 'Dragon' (DR) cultivars were tested and the cutting position was cut at the 3rd node in the stem (treatment I) and cut at the central part (stem segment) between 3rd leaf and 4th leaf in the stem (treatment II). The air temperature was maintained at 18, 23, 28 and $35^{\circ}C$ in the growth chambers, respectively. The photosynthetic photon flux at the ground of a chamber was maintained in approximately $150-200{\mu}mol\;m^{-2}s^{-1}$ during the 16-hour photoperiod. The relative humidity in the chambers was maintained over 85%. After 10 days of cuttings, regardless of cutting position, DR and NS cultivars showed 100% the survival rate in the $18^{\circ}C$ or $23^{\circ}C$ treatments, however, most of plants $18^{\circ}C$ treatment had not rooting. In the $28^{\circ}C$ treatment, regardless of cutting position, DR and NS cultivars showed 100% of the rooting rate. In the $23^{\circ}C$ treatment, for DR cultivar, the node cutting showed 90% of rooting rate and the stem segment cutting showed 40% rooting rate. For NS cultivar, the node cutting showed 50% of rooting rate and the stem segment cutting showed 40% rooting rate. DR and NS cultivars have high rooting rate, while the rooting rate remarkably decreased in the $35^{\circ}C$ treatment. For DR cultivar, the stem segment cutting showed 5.3 of the highest rooting number and the node cutting showed 2.7 rooting number in the $28^{\circ}C$ treatment. NS cultivar was not significantly different the rooting regardless of cutting position. The results suggested that cutting at the stem segment cutting of bitter gourd is an effective cutting method for increasing survival rate and the air temperature should be maintained at $28^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.200-205
• /
• 1988

The paper introduces the system AUTO-CUT for the automatic generation of NC tapes for wire-cut EDM(Electrodischarge Machining) parts. The information input to the system is the description of the part geometries, the tool motions and the cutting conditions etc. The system generates CLDATA and machine control data. Also dynamic simulation of tool motions can be performed on the screen.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.71-76
• /
• 2006

In this paper, a long gauge Fiber Bragg Grating (FBG) sensor system is described and long gauge FBGs are well, suited for measuring the upper parts of the bridge piers under the extremely severe movement conditions. In the experiments, we used more than 30m long FBG sensors to measure the movement of top part of the bridge piers which are separated from the main bridge by cutting the decks. With the actuator, the deck and girders were pushed and released. We checked the movement of the top of the pier while releasing the pressure of the actuator with the long gauge fiber sensor. In order to measure the movement of the upper part of the pier, the reference point must be outside of the pier. Using the optical fiber sensors, one end of the sensor is attached to the top of the pier and the other end is attached to the bottom of the next pier. The fiber sensors showed good response to the release loading and we could calculate the movement of the top part of the pear.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.207-213
• /
• 2009

The bundling process is the final step in vegetable manufacturing, however, the process is a little difficult to be automatized, because vegetable has the physical properties of roughness, softness, and fragility etc. In this paper, we proposed an automatic bundling mechanism for vegetable based on the heat melt sticking. The proposed mechanism consists of three modules, one module is the moving part for aligning of the vegetable shape and adjusting of the vegetable tension, second module is the arm driving part for the vegetable binding and the band roll releasing, and third module is band joining, band cutting, and band feeding part for the vegetable binding continuously. Through this research, Using the SMO(SimDesigner Motion) module, we optimize condition of mechanical movement of the bundling mechanism. This bundling system designed in order to binding 288 bundle/hour.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.593-598
• /
• 2014

To solve the labor shortage of skilled workers, the ship building industry needs the automation and mechanization. Especially, compared with other process, handrail manufacturing process of ship building falls behind the automation. In this paper, we designed and implemented a flat-iron automation system using computer convergence technology that can be used in the production of handrails in shipbuilding. The system's machine part was designed by considering the efficiency, productivity, and stability of the cutting process, and checked the stability of the structure using CATIA and ANSYS. The system's control part was used the PCNC controller to provide openness and scalability. And the part was made for system control and monitoring the system through screen manipulation with touch-screen form. A flat-iron automatic system was developed by converging the mechanics, electronics and computer technology and it will contribute to improve the productivity of the industrial system.