• 생명과학회지
• /
• 제8권2호
• /
• pp.126-130
• /
• 1998

Vibrio unlnificus ATCC 27562의 16S rRNA 유전자를 PCR법과 제한효소절단법으로 분석 하여 얻은 결과는 다음과 같다. 1. 고안된 한쌍의 primer로 PCR을 시행하여 얻은 산물은 약 1.3Kb 였다. 2. PCR산물을 여섯가지의 제한 효소로 절단하여 얻은 단편들은 아래와 같다. BamH I: 어떤 restriction fragment도 만들지 않았다. Alu I : 약 400bp와 200bp의 두가지 fragment를 생산하였다. Sau3A I : 약 70bp에서 450bp 사이에 세가지 fragment를 생산하였다. Hind III : 약 800bp와 500bp의 약간 큰 두가지 fragment를 생산하였다. Sal I : 약 500bp와 750bp의 두가지 fragment를 생산하였다. Sma I : 약 800bp와 470bp의 두가지 fragment를 생산하였다.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.163-176
• /
• 2017

개별요소법(Discrete Element Method, DEM)은 토목공학 등 입자형태의 재료를 다루는 분야에서 다양하게 이용된다. 본 연구에서는 DEM 기법에 근거한 입자 역학 전용 해석 상용 소프트웨어를 사용하여 면판형 토압식 쉴드TBM 굴착성능을 평가하기 위한 수치 해석을 수행하였다. TBM에 대한 해석은 커터헤드의 회전속도가 다른 두 가지 조건에 대해 수행되었다. 해석 모델의 직경은 6.64m이며 6개의 스포크를 갖는 것으로 작성되었다. 또한, 37개의 프리커터와 98개의 스크래퍼가 각 스포크에 모델링 되었다. 해석결과를 통해, 커터헤드면과 쉴드, 절삭 도구에 작용하는 압축력과 커터헤드면에서 발생하는 저항 토크의 크기를 검토하였으며 스크루 오거를 통해 배출되는 토사량에 대해서는 각각 단위 시간당 배토량과 누적 배토량을 검토하였다.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.619-625
• /
• 2005

Beads loaded with the water-soluble drug, phenylpropanolamine HCl (PPA), were prepared using an extruder and double arm counter-rotating roller modified from a traditional pill machine. The mean diameter of the cylindrical rod-like extrudate from the ram extruder was 3 mm; that of the uncoated bead after cutting and spheronization by the modified double arm counter-rotating roller was 3.26~3.28 mm. Although the surface of the beads was moderately rough and irregular, some exhibited hump-shaped protrusions, the sphericity was acceptable (roundness 1.15) and adequate for the subsequent coating process. An increase in mean diameter of the coated beads and improvements in friability and sphericity were observed in proportion to the amount of coating material applied (ethylcellulose or Eudragit？？ RS 100). It was also found that the release rate of PPA from the coated beads could be controlled by the amount and type of coating materials applied or with the incorporation of Eudragit ？？ RS 100 into the core matrix. Further modifications to the double arm counter-rotating roller, including adjustment of the rotation speed and distance between the rollers, would yield smaller uncoated beads with improved roundness and surface roughness. In conclusion , the present method could be potentially applied to prepare controlled release drug delivery beads or pellet dosage forms.

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.35-42
• /
• 2017

Purpose: The purpose of this paper was to evaluate the occurrence of errors regarding adaptation by conducting a three-dimensional assessment comparing the bridge type dental restoration after the cutting process, which has multiple abutments, with a single type dental restoration. Methods: By using ten identical files obtained by scanning the master model, thirty designs were created consisting of ten maxillary right first premolars and ten maxillary right first molars with single crown abutments, along with ten bridge designs with the identical abutment. A 5-axis milling machine was used to produce the design file. The produced denture prostheses were scanned using a silicone replica for a STL file. An evaluation was conducted using 3D analysis software on the master model and each of the thirty data files. Results: The RMS value of the pre-molar (14) was $38.4{\pm}4{\mu}m$ for single and $54.7{\pm}6{\mu}m$ for bridge abutment; therefore, a statistically significant difference was observed for single and bridge designs although both shared the same abutment form (P<.05). Also, the RMS value of the molar (16) was $47.6{\pm}2{\mu}m$ and $56.6{\pm}5{\mu}m$ for the single and bridge designs, respectively, thereby presenting a statistically significant difference (P<.05). Conclusion: As a result, dental prosthesis fabricated using the single method presented better internal adaptation outcomes.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.731-733
• /
• 2016

라인 트레이서의 기본적인 목표는 주어진 주행선을 센서로 검출하여 목적 위치까지 정확하고 빠르게 이동하는 것이다. 이를 응용하여 현재 무인 운송 차량, 레이저 절단기, 자율이동 및 주행이 가능한 무인 로봇 등 여러 분야에 활용되고 있고, 응용에 따라 많은 발전의 가능성을 가진 분야로 여러 대학교에서 매년 대회를 개최하고 있다. 하지만, 하드웨어적인 설계와 제어방식에 따라 주행 성능에 많은 차이가 생긴다. 본 논문에서는 라인트레이서의 특성을 향상시키고자 지적 PID를 적용한 제어기를 설계하여 시스템의 특성을 향상시키는 방안을 강구하고자 한다.

• Journal of Computational Design and Engineering
• /
• 제1권1호
• /
• pp.27-36
• /
• 2014

Similar to the essential components of many mechanical systems, the geometrical properties of the teeth of spiral bevel gears greatly influence the kinematic and dynamic behaviors of mechanical systems. Logarithmic spiral bevel gears show a unique advantage in transmission due to their constant spiral angle property. However, a mathematical model suitable for accurate digital modeling, differential geometrical characteristics, and related contact analysis methods for tooth surfaces have not been deeply investigated, since such gears are not convenient in traditional cutting manufacturing in the gear industry. Accurate mathematical modeling of the tooth surface geometry for logarithmic spiral bevel gears is developed in this study, based on the basic gearing kinematics and spherical involute geometry along with the tangent planes geometry; actually, the tooth surface is a parametric surface defined on a parallelogrammic domain. Equivalence proof of the tooth surface geometry is then given in order to greatly simplify the mathematical model. As major factors affecting the lubrication, surface fatigue, contact stress, wear, and manufacturability of gear teeth, the differential geometrical characteristics of the tooth surface are summarized using classical fundamental forms. By using the geometrical properties mentioned, manufacturability (and its limitation in logarithmic spiral bevel gears) is analyzed using precision forging and multiaxis freeform milling, rather than classical cradle-type machine tool based milling or hobbing. Geometry and manufacturability analysis results show that logarithmic spiral gears have many application advantages, but many urgent issues such as contact tooth analysis for precision plastic forming and multiaxis freeform milling also need to be solved in a further study.

• 융합정보논문지
• /
• 제7권4호
• /
• pp.75-81
• /
• 2017

정보기술의 디자인 트렌드는 시대에 따라 빠르게 변해왔으며, 최근의 정보 디스플레이의 디자인 트렌드는 베젤리스 디스플레이가 대세이다. 베젤리스 또는 에지리스 디스플레이는 휴대폰 디스플레이의 새로운 트렌드로 부상하고 있다. 본 논문에서는 이른바 베젤리스 디스플레이라고 불리는 기기 면적 대비 높은 화면 비율을 갖는 터치패널 디스플레이의 조립 공정에 적합한 차광 테이프를 개발하였다. 차광 테이프는 자외선 경화형 아크릴계 감압성 점착제를 PET 필름 위에 롤투롤 공정으로 코팅하여 제조하였다. 자외선 경화형 감압성 점착제는 톨루엔을 전혀 사용하지 않는 친환경적인 제조 방법으로 합성되었다. 제조된 차광 테이프의 점착력은 자동화된 인장시험기로 분석하였으며, 형상유지 특성인 칙소성은 주사 전자 현미경으로 분석하였다. 그 결과 제조된 차광 테이프는 터치패널 디스플레이의 조립 공정에 적합한 높은 점착력과 우수한 칙소성을 나타내었다. 이러한 기능성 차광 테이프의 개발은 그 동안 차광 테이프의 칙소성 부족으로 인하여 야기되었던 터치 패널 디스플레이 조립 공정의 생산성향상 및 품질안정성 향상에 기여할 것으로 기대된다.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.14-19
• /
• 2005

One area in which composites have been used rather extensively is for fabricating pressure vessel. These structures can be readily manufactured by filament winding, which is, as far as composite fabrication techniques are concerned, a relatively inexpensive method for producing composite structures. Unfortunately, the higher strength material and fabrication costs are not the only disadvantages of fiber-reinforced polymer composites when they are compared to metals. Additionally, these materials tend to exhibit brittle behavior. This is of particular concern when they are subjected to a low-velocity impact during routine handling a significant amount of structural damage can be introduced into the composites. The goals of this paper are to understand the impact damage behavior and identify the effect of surface coating materials on impact resistance in filament wound composite pressure vessels. For these, a series of low velocity impact tests was performed on specimens cutting from the full scale pressure vessel by the instrumented impact testing machine. The specimens are classified into two types with and without surface protective material. The visualization for impact damage is made by metallurgical microscope. Based on the impact force history and damage, the resistance parameters were employed and its validity in identifying the damage resistance of pressure vessel was reviewed. As the results, the impact resistance of the filament wound composites and its dependency on the protective material were evaluated quantitatively.

• 패션비즈니스
• /
• 제17권1호
• /
• pp.131-144
• /
• 2013

The purpose of this study was to analyse the structure and contents of clothing construction field in the middle-school textbook of technology and home economics with curriculum revised in 2007. 10 kinds of textbooks certified by Ministry of Education, Science and Technology in 2010 were selected and home economics field in them was the subject of this study with the external characteristics such as textbook system, instruction area and contents included. This study was content analysis-oriented and descriptive with data calculated by frequency and percentage. The findings are as follows. In 'Reality of Home-Life', food life area showed highest as 34.4% followed by clothing life(28.7%) and dwelling life(28.7%). The portion of present teachers in writing staffs was highest while there was no textbook where professors of each field were included in writing staffs. The contents of costume society, clothes material, clothes management from section 'Choice and Management of Clothes' in the chapter 'Family Life' and clothing construction from the section 'Making and Modifying Clothes' of the chapter 'Reality of Home-Life' were analysed in this study. Clothing construction-related fields were suggested separately by method of measurement, construction theory, drafting theory, drafting an original form, fabric trimming, utilization of the original form, length measure, cloth cutting, hand stitching, how to use a sewing machine, basting and correction, needlework process, completion, and evaluation. The contents of the unit 'Making Shorts' were about clothing construction theory, human body measurement, drafting an original form, process of making shorts and activity/research/experience. The contents of the unit 'Wearing Clothes after Fixing' in clothing construction-related field were about how to fix and recycling.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.282-287
• /
• 2014

Objectives: The aim of the present study was to investigate the bond strength of RelyX Unicem (3M) to root canal dentin when used as an endodontic sealer. Materials and Methods: Samples of 24 single-rooted teeth were prepared with Gates Glidden drills and K3 files. After that, the roots were randomly assigned to three experimental groups (n = 8) according to the filling material, (1) AH Plus (Dentsply De Trey GmbH)/Gutta-Percha cone; (2) Epiphany SE (Pentron)/Resilon cone; (3) RelyX Unicem/Gutta-Percha cone. All roots were filled using a single cone technique associated to vertical condensation. After the filling procedures, each tooth was prepared for a push-out bond strenght test by cutting 1 mm-thick root slices. Loading was performed on a universal testing machine at a speed of 0.5 mm/min. One-way analysis of variance and Tukey test for multiple comparisons were used to compare the results among the experimental groups. Results: Epiphany SE/Resilon showed significantly lower push-out bond strength than both AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p < 0.05). There was no significant difference in bond strength between AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p > 0.05). Conclusions: Under the present in vitro conditions, bond strength to root dentin promoted by RelyX Unicem was similar to AH Plus. Epiphany SE/Resilon resulted in lower bond strength values when compared to both materials.