• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.136-143
• /
• 2010

This study was conducted to provide basic information on the management of natural deciduous forests by presenting suitable stand density over time for natural deciduous forests in Pyungchang Area. The stand density index(SDI) for the sampling point was also computed. The cutting scenarios were adopted by considering the SDI estimated in the sampling point. And then, simulation cutting was enforced to the stand. Cutting scenarios consisted of three cutting levels, with the period of 5 years where each suitable cutting level of selection system will not have the SDI over the maximum SDI throughout 30 years and consider harvest after 30 years. As a result of the simulation cutting, it was found that removing 12% and 14% of basal area per each time kept proper stand density while removing 10% exceed to the adequate basis. From an economic point of view, it was concluded that removal 12% of basal area would be the most suit cutting level in selection system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.213-220
• /
• 1993

This experiments were carries out to estimate the optimum final cutting date in autumn and the selection of highly adaptable varieties in mountainous pastures of Taekwalyong area. The evaluations were based on the data of varietal differences of dry weight of lant(DW) and yield components of the 1st cutting as affected by various final cutting dates of last autumn. Nine varieties of fall fescue Barvetia, Fuego, Demeter, Safe Barcel Forager, Johnstone, Enforcer and Stef, were used and 4 final cutting date of autumn were $C_1$, cut on 30 Sept. $C_2$, on 14 Oct. $C_3$, on 28 Oct. and $C_4$ on 11 Nov.. respectively. The results obtained were as follows; 1. Between the dry weight of plant(DM) and yield components of 1st cutting were different by various final cutting dates of autumn. The dry weight of plant(DW) was significantly positive correlated with heading characteristics of the 1st cutting in earlier cuttings$(C_1-C_3)$ of autumn, but there was not significant correlated with heading characteristics of the 1st cutting in the latest cutting$(C_4)$ of autumn. 2. The variety of Forager with heavier weight of heading tiller(HTW) and dry weight of tiller(WT) showed the highest dry weight plant(DW) of the 1st cutting in earlier cuttings$(C_1-C_3)$ of autumn, whereas the variety of Barcel with high number of tillers per plant(NT) showed a high dry weight of plant(DW) of the 1st cutting in the latest cutting$(C_4)$ of autumn. 3. Optimum final cutting date and critical period of mountainous pastures in Taekwalyong area were estimated in late September$(C_1)$ and middle October$(C_2)$, sespectirety. 4. The dry weight of plant(DW) of the 1st cutting was significantly negative correlated with final cutting dates in growth period of autumn.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.60-66
• /
• 2012

In this study, it was evaluated the fire risk during welding cutting tasks. Welding-cutting machines are representatively used at construction sites. Inverter AC/DC TIG welding macnine and inverter air plasma cutting machine were used in experiments. Temperature of spreaded cinders was measured using a thermal camera. Cinder sizes and spread range were measured according to the height and input current. It was also evaluated the fire risk during welding-cutting process, when flammable materials were located around the working area. There were used hay, dust fence, urethane foam, vinyl, paper and oil as flammable materials. Temperature of spreaded cinders was reached at about $450^{\circ}C$. Cinders were spread approximately 4.7 m, when a worker carried out cutting process at 2.5 m height. The possibility of a fire is very high, when flammable materials were located around the working area.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.5-12
• /
• 2019

In this paper, we studied the micro tool deflection, micro cutting with low temperature, and deformation of micro ribs caused by cutting forces. First, we performed an integrated machining error compensation method based on captured images of tool deflection shapes in micro cutting process. In micro cutting process, micro tool deflection generates very serious problems in contrast to macro tool deflection. To get the real images of micro tool deflection, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool path. Second, in macro cutting fields, the cryogenic cutting process has been applied to cut the refractory metal but, the serious problem may be generated in micro cutting fields by the cryogenic environment. However, if the proper low temperature is applied to micro cutting area, the cooling effect of cutting heat is expected. Such effect can make the reduction of tool wear and burr formation. For verifying this passibility, the micro cutting experiment at low temperature was performed and SEM images were analyzed. Third, the micro pattern was deformed by the cutting forces and the shape error occurred in the sidewall multi-step cutting process were minimized. As the results, the relationship between the cutting conditions and the deformation of micro-structure during micro cutting process was investigated.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.343-349
• /
• 2018

The proposed hybrid algorithm combines the benefits of rapid convergence property of mean filed annealing(MFA) and the effective genetic operations of simulated annealing-like genetic algorithm(SGA). This algorithm is applied to the isotropic material stock cutting problem, especially to glass cutting in distributed computing environments base on MPI called message passing interface. The glass cutting is to place the required rectangular patterns to the given large glass sheets resulting in reducing the wasted scrap area. Our experimental results show that the heuristic method improves the performance over the conventional ones by decreasing the scrap area and maximum execution time. It is also proved that the proposed distributed algorithm maintains the convergence properties of sequential one while it achieves almost linear speedup as the problem size increases.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.88-95
• /
• 1997

This study provides the useful actual data instead of the experience data using in industrial fields. Especially, values of each components of cutting force are effective in the rake angle, setting angle and cutting area. Many researches have been made on the work piece materials, kinds of bite materials, rake angle, nose radius and depth of cut, but a few on the bite setting angle. In order to select optimal cutting speed, it was summarized the following results are achieved; A chieved that an affect of cutting resistance on the setting angle is a little under giving experimental conditions and therefore a worker can be choose the value of it randomly.

• Tunnel and Underground Space
• /
• v.6 no.2
• /
• pp.175-183
• /
• 1996

Linear cutting tests on granite were conducted to evaluated the cutting performance of abrasive water jet(AWJ) using several types of abrasives. The abrasives used in the tests were grarnet, alumimum oxide, and silicon carbide. And one type of granite which is comercially known as "KeuchangSuk" was used as workpiece throughout the tests. The results from the tests were described in terms of cutting depth and abrasive productivity. Authors tried to confirm the effects of the operational parameters of abrasive mass flow rate, water pressure, and traverse speed of nozzle on cutting depth and presented almost all the data obtained in the tests. Abrasive productivity can be defined as the area of kerf wall cut by unit weight of abrasive and is an important factor to evaluated the cutting ability of abrasive and assess the cost effectiveness of an AWJ system. In the tests the maximum abrasive productivities of garnet, alumina, and silicon carbide were about 0.21, 0.24, and 0.20 $\textrm{cm}^2$ respectively under similar operational conditions.onditions.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.591-596
• /
• 2000

The needs of ultra precision machined parts is increase every days. But the experimental data of nonferrous metal is insufficient. The cutting behavior in micro cutting area is different from that of traditional cutting because of the size effect. Al6061 is widely used as optical parts such as LASER reflector's mirror or multimedia instrument. Al6061 opper is machined by ultra precision machine with natural diamond tool. From the experiment and discussion on the cutting force and worked surface roughness as the variable spindle speed, feed rate and depth of cut. As a result, the cutting force increases as the increasing depth of cut, but the worked surface roughness does not increase so much. The surface roughness is good when spindle sped is above 1200rpm, and feed rate is small. The influence of depth of cut is very small.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.103-110
• /
• 1997

This study provides the useful actual data instead of the experience data using in industrial fields. Especially, values of each components of cutting force are effective in the rake angle, setting angle and cutting area. Many researches have been made on the work piece materials, kinds of bite materials, rake angle, nose radius and depth of cut, but a few on the bite setting angle. In order to select optimal cutting speed, it was summarized the following results are achieved; A chieved that an affect of cutting resistance on the setting angle is a little under giving experimental conditions and therefore a worker can be choose the value of it randomly.