• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.289-294
• /
• 1997

The chestnut is a well-known and important forest product in Korea. The annual production of chestnut is about 100, 000tons and its cultivating area is 80, 000ha. However, the peeling process of outer and inner skins of chestnut is very difficult due to hardness and adhesiveness of chestnut skin. The peeling process of chestnut was operated by manual work and the performance of chestnut peeling machine is very low. The purpose of this study is to develope the prototype of new chestnut peeling system. The hardness of chestnuts was tested with six different drying conditions and its range was from 949$g/mm^2$ to 2, 149$g/mm^2$. The hardness of chestnuts was decresed gradually during the drying process. The chestnut peeling Process includes sorting, storage, drying, outer skin cutting, flame peeling, continuous frictional skin peeling, and inner skin cutting operation. The developed chestnut peeling system consists of outer skin cutter, flame peeler, continuous frictional skin peeler and inner skin cutter. The system can peel domestic chestnuts at 150$kg/hr$ with peeling rate of 78%.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.421-428
• /
• 2003

This study was conducted to determine the optimum blade shape for peeling Altari radish. To figure out the required peeling force according to various angles of blade and rakes of peeling cutter, two peeling tests such as circumferential peeling and longitudinal peeling of Altari radish were carried out. Based on the pretest results, which performed to investigate the applicability of the optimum shape of cutter and to find out the cutting pattern according to the lapse of days after harvesting the radish, the peeling depth and width of the blade were fixed at 2 mm and 10 mm. From two methods of circumferential and longitudinal peeling test, the angles of rake and blade as cutter shape factors were affected on peeling force. But the peeling speed was not affected on it under the safety speed as 0.2 m/s, without blade vibrating on peeling operation. The rake angle was more effective factor than the blade angle, and the optimum angles of blade and rake were 10$^{\circ}$ and 55$^{\circ}$ respectively. The cutting surface by the longitudinal peeling was more smooth than that by the circumferential peeling. There was no problem in peeling work during 4 days after harvest because the freshness of the Altari radish was maintained.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.329-335
• /
• 1984

The effect of peeling methods, spherecity and weight of potatoes and carrots on the peeling efficiency were investigated. The changes in the surface texture by peeling were estimated by Rheometer and were related to the changes in the microstructure. The optimum mechanical peeling conditions using abrasion type rotary peeler were 90 sec. at 300 rpm for potatoes, 70 sec. at 300 rpm for sweet potatoes and 60 sec. at 300 rpm for carrots. The peeling loss was influenced by the sphericity and weight of the sample. The optimum conditions for alkali peeling were 90 sec. immersion in boiling 10% NaOH solution for potatoes, 300 sec. in boiling 10% NaOH solution for sweet potatoes and 60 sec. in boiling 6% NaOH solution for carrots. Severe damage of surface structure was noticed by alkali peeling, demonstrated by denaturation of starch granules in the cell. The structural damage observed by microscope was related to the reduction of cutting force after peeling.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.227-236
• /
• 2022

The microblade cutting method, so-called SAICAS, is widely used to quantify the adhesion of battery composite electrodes at different depths. However, as the electrode thickness or loading increases, the reliability of adhesion values measured by the conventional method is being called into question more frequently. Thus, herein, a few underestimated parameters, such as friction, deformation energy, side-area effect, and actual peeing area, are carefully revisited with ultrathick composite electrodes of 135 ㎛ (6 mAh cm^-2). Among them, the existence of side areas and the change in actual peeling area are found to have a significant influence on measured horizontal forces. Thus, especially for ultrahigh electrodes, we can devise a new SAICAS measurement standard: 1) the side-area should be precut and 2) the same actual peeling area must be secured for obtaining reliable adhesion at different depths. This guideline will practically help design more robust composite electrodes for high-energy-density batteries.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.1
• /
• pp.24-28
• /
• 2002

Effect of pretreatment processing (peeling time, drying temperature, sample type) on the quality of hot air drying peony roots was investigated. Peony roots were peeled for 0, 10, 20, 30, 60, 90 and 120 minute in the peeling machine after water washing. Sample types were whole or cut (thickness of 3mm). Temperatures of hot air drying were 30, 40, 50 and $60^{\circ}C$ The level of water contents in dried sample was $14{\sim}15%$. Drying time was muth reduced as the peeling time, cutting sample types and higher temperature. Contents of paeoniflorin were maintained highest amount (3.48%) in the non-peeling cut sample dried at $30^{\circ}C$ and lowest amount (2.29%) in the 120min-peeling whole one dried at $60^{\circ}C$. Skin color of dried peony roots was heavily discolored in the sample of non-peeling whole type dried at $60^{\circ}C$ and the color was dark brown $({\Delta}E\;was\;46.1)$. When considering shortening of drying time, preservation of active compounds and maintenance of color, the best pretreatment method of drying in peony roots was non-peeling, cut type processing.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.438-444
• /
• 2006

This study was carried out to obtain fundamental data such as peeling efficiency and quality of potatoes and sweet potatoes peeled by hand, machine and alkali(NaOH). The weight loss by peeling was influenced by peeling methods. Weight losses by rotational brushing-type peeler showed the lowest value, 7.9% in potato, and 7.3% in sweet potato. Any significant differences in moisture content were not found in potatoes and sweet potatoes by peeling methods. The pH of potatoes and sweet potatoes just after peeling were 5.8-6.8 and 6.23-6.63, and decreased somewhat until 3 hrs after peeling. Hardness of potatoes and sweet potatoes peeled by hand with fruit knife were better than that of others. Depending upon the peeling method used the color and color differences undergo some changes in their color and browning. Color difference value of peeled potatoes by hand with a technical tools, and by mechanical peeler such as rotational cutting-type peeler and rotational brushing-type peeler showed just slightly. In particular, changes of rotor differences value of potatoes and sweet potatoes peeled by dipping with 10% NaOH solution at $100^{\circ}C$ was the highest in the samples peeled by NaOH.

• Tribology and Lubricants
• /
• v.22 no.4
• /
• pp.225-229
• /
• 2006

The issue with the drainpipe now a day is that they are laid underground. Causing us to perform additional work to repair, such as digging up the ground and peeling off the insulator that surrounds the pipe. And such series works are difficult that concession appears from government and municipal office. However, if we can save time and money. Performance of piping robot that we are studied in existing session through fixing unit and improvement of cutting bit shorten and wished to heighten work efficiency. And we are trying to develop a unit that can cut up the projecting parts which connects with the interior part of the drainpipes.

• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.301-310
• /
• 2002

With a purpose to manufacture an onion peeler, the root cutting equipment of the onion could be attached to a prototype onion peeler was developed. Before the experiment, the distribution of the dimensions of the Korean native onion were measured. And some types of the blades to cut and remove the root of the onion were designed and such characteristics as feasible revolution, conveying speed, and power requirement were investigated. From the result of the test, the selected one among the various cutters was the wing type blade with the round blade to cut out the root and with the vertical blade to cut a circular line. The optimum operating conditions of the wing type blade were revealed the revolution with no load was at 630 rpm, and the conveying speed was 0.08 m/s. Under these conditions, the maximum torque was 5.25 kg·m and the power requirement was 33 W, respectively.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.105-109
• /
• 1997

The effects of surface conditions of the C-2 cemented carbide substrate on the adhesion of diamond film were investigated. The substrates were pretreated for different times with Murakami's reagent and then the acid solution of an H2SO4-H2O2. The adhesion strength was estimated by a peeling area around the Rockwell-A indentation. The cutting performance of the diamond-coated tools was evaluated by measuring flank wears in dry turning of Al-17% Si alloy. The morphology of deposited diamond crystallites was dominated by (111) and (220) surfaces with a cubooctahedral shape. The diamond film quality was hardly affected by the surface conditions of the substrate. The variation of tool life with longer substrate etching times resulted from a compromies between the increase of film adhesion at the interface and the decrease of toughness at the substrate surface. The coated tools were mainly deteriorated by chipping and flaking of the diamond film form a lock of adhesion strength, differently from the wear phenomena of PCD tools.