• 제목/요약/키워드: Cutting Power

Search Result 434, Processing Time 0.022 seconds

Factors Affecting Depression among Female Marriage Immigrants (여성결혼이민자의 우울 영향요인 연구)

  • Kim, Yoen-Soo
    • Journal of Digital Convergence
    • /
    • v.12 no.11
    • /
    • pp.575-583
    • /
    • 2014
  • The purpose of this study was to investigate factors affecting depression among female marriage immigrants in relation to demographic, family, self-efficacy, acculturation, and physical health aspects. The subjects were 556 marriage immigrants residing in Seoul, Keong-gi, and Chung-cheong areas. 47.1% of the subjects showed $${\geq_-}16$$ of CES-D which is the cutting points on depression. The results from hierachical regression analysis indicated that family income(${\beta}=-.13$, p=.002) at the first demographic model and self-efficacy(${\beta}=-.13$, p<.001), family relationship(${\beta}=-.16$, p<.001), acculturation to Korean culture(${\beta}=-.08$, p=.05), acculturative stress(${\beta}=.31$, p<.001), and mal-physical health(${\beta}=.18$, p<.001) at the final model affected female marriage immigrants' depression. The explanatory power of these variables was 37.1%. Based on these results, social services and policies for the prevention of depression among female marriage immigrants were discussed.

The Effects of Coupling Agent and Crosslinking Agent in the Synthesis of Acrylic Pressure Sensitive Adhesive for Polarizer Film (편광필름용 아크릴 점착제의 합성에서 커플링제와 가교제의 효과)

  • Lim, Chang-Hyuk;Ryu, Hoon;Cho, Ur-Ryong
    • Polymer(Korea)
    • /
    • v.33 no.4
    • /
    • pp.319-325
    • /
    • 2009
  • The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexylacrylate, butylacrylate, acrylic acid were used as acrylic monomers. The ratio was 2-ethylliexylacrylate:butylacrylate:acrylic acid=25:50:3.6 by reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. When 1 wt% of coupling agent was added to the polymerized pressure sensitive adhesive, the light transmissivity was significantly increased. This result is due to the enhancement of adhesive power against liquid crystal cell by Si-O bond of coupling agents. Cross-linking agent was added by 0.5, 1.0, and 1.5 wt% with respect to the synthesized polymer. Initial tackiness decreased, while cohesion increased with increasing crosslinking agent. In the analysis of contact angle, the increase of crosslinking agents yielded the enhancement of surface energy, resulting in the decrease of contact angle. From the measurement of heat resistance, the acrylic pressure sensitive adhesive showed excellent heat resistance regardless of change in temperature and contents in crosslinking agent. In the observation of a cutting plane, the increased crosslinking agent represented a smoother and cleaner section. Comprehensively, the optimum additive amount of crosslinking agent was determined to be 1.0 wt% to monomer.

Development of an Underwater Rope-cutter Device and Controller for Removal of Propeller and Shaft Foreign Material for Small Vessel (소형선박용 프로펠러 및 샤프트 이물질 제거를 위한 수중절단기 기구 설계 및 제어기 개발)

  • Lee, Hunseok;Oh, Jin-Seok;Choi, Sun-Hong
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.7
    • /
    • pp.927-935
    • /
    • 2019
  • Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

An Analysis of the Economic Effects for the Immersive Media Industry (실감미디어 산업의 경제적 파급효과 분석)

  • Lee, Kyoung-Jae;Jeong, Woo-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.7B
    • /
    • pp.795-805
    • /
    • 2011
  • The research on the immersive media technology is actively being done with the emergence of immersive services using immersive media, especially in the broadcasting industry and with the increased market demand for it. The industry which produces, transmits, processes and services the immersive contents is commonly called Immersive Media Industry. Immersive Media Industry has recently received attention as next-generation strategic industry with its high marketability and its high possibility of market expansion through convergence with other industry such as education, health, advertisement, travel and public service industry. As other advanccd country such as the U.S., Japan and Europe buckle down to take the innitiative in the immersive media industry, Korea government also begins to make plan to promote the immersive media industry. As above, immersive media industry is a cutting-edge convergence industry which embraces broadcasting, telecommunication and contents industry and it is rising as core growth engine industry. This article analyses the economic effects of immersive media industry through quantatitive method and evaluates the relations between the immersive media industry and the other related industries. As a result, the effect on production inducement of immersive media industry is 610.9 billion Korean Won; the effect on value-added inducement is 468.7 billion Korean Won; and it is measured that 3,258 job will be created by the immersive media industry.

EPMA Analysis of Inter-reaction Layer in Irradiated U3Si-Al Fuels (EPMA를 이용한 U3Si/Al 조사 핵연료의 반응층 분석)

  • Jung, Yang-Hong;Yoo, Byung-Ok;Kim, Hee-Moon;Park, Jong-Man;Kim, Myung-Han
    • Analytical Science and Technology
    • /
    • v.17 no.4
    • /
    • pp.355-362
    • /
    • 2004
  • Fission products and Inter reaction layer of $U_3Si-Al$ dispersion fuel, irradiated in HANARO research reactor with 121 kW/m of maximum liner power and 63 at% of average burn-up, was characterization by EPMA (Electron Probe Micro Analyzer). The fuel punching system developed by Irradiated Materials Examination Facility (IMEF) has used to make these samples for the EPMA. With this system a very small and thin specimen which is 1.57 mm in diameter and 2 mm in thickness respectively has been fabricated to protect the EPMA operator from high radioactive fuel and to mini-mize the equivalent dose rate less than 150 mSv/h. EPMA was performed to observe layers of sectional, Inter-reaction and oxide with specimens of cutting and polished. Stoichiometry in the Inter-reaction layer with $16{\mu}m$ of thickness was $U_{2.84}$ Si $Al_{14}$ with calibration of $UO_2$ and $U_{3.24}$ Si $Al_{14.1}$ with calibration of standard specimen. metallic precipitates in this layer were not observed using fission products examination.

A Study on Economical Analysis of Yarding Operation by Cable Crane (케이블클레인을 이용(利用)한 집재작업(集材作業)의 경제성(經濟性)에 관(關)한 연구(硏究))

  • Woo, Bo Myeong;Park, Jong Myeong;Lee, Joon Woo;Chung, Nam Hun
    • Journal of Korean Society of Forest Science
    • /
    • v.79 no.4
    • /
    • pp.413-418
    • /
    • 1990
  • Since 1945, the periodical reforestation projects considered as the fundamental apparatus of the forest policy of the Government have been continuously carried out during last 40 years in Korea. As a result, some of the forests are ready to be harvested, especially in well-managed plantations as well as in the natural forests. This requires to pay more attention to harvesting the timber rather than planting trees. At the present, such timber harvesting operations such as cutting, felling, bucking, and skidding and yarding, particularly yarding operations in mountain areas with harsh terrains are in the most cases depend upon man power. However, the yarding operations should be more mechanized in the near future in Korea mainly because of the high cost of labour couppled with the lack of labour in forested areas. The Forest Work Training Center attached to the Forest Administration imported and tested the smallsized cable crane(K-300) with movable tower. The result of economic analysis of the yarding operation expenditures shows that the cable crane yarding costs more than the man yarding at the present time. As the labour cost will gradually increase and the efficiency of machine operation will improve, the results of the study indicates that the yarding operation by cable crane will be more cost-effective in the future.

  • PDF

A Study for Predicting Rotational Cutting Torque from Electrical Energy Required for Ground Drilling (지반절삭 전기에너지를 활용한 회전굴착토크 예측에 관한 연구)

  • Choi, Chang-Ho;Cho, Jin-Woo;Lee, Yong-Soo;Chung, Ha-Ik;Park, Yong-Boo
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.7
    • /
    • pp.57-64
    • /
    • 2007
  • This study proposes a method to estimate drilling torque during ground boring with an aid of electrical energy required for rotating a boring-auger. Ground boring is commonly used in geotechnical engineering such as preboring precast pile installation, soil-cement grouting, ground exploration and so forth. In order to understand the correlation between required electrical energy to rotate the boring auger and the drilling torque, a small laboratory apparatus was designed and a pilot study was performed. The apparatus rotates common drill bits of $D=5{\sim}25mm$ in CBR specimens. The velocity of a bit is 19 RPM and predefined using a reduction gear which connects a main rotation axis to a 25 Watts AC electrical motor shaft. In the middle of drilling the motor current increments and the drilling torque were measured and the correlation between the current and the torque was obtained through linear square fits. Based on the correlation the acquired motor current during drilling was applied to predict the drilling torque in consequent testing and the prediction results were compared to the measured torque. The comparison leads a conclusion that the motor current during drilling using electrical power may be a good indicator to estimate/determine strength characteristics of the ground.

Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel - (식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 -)

  • 성태종
    • Journal of Applied Tourism Food and Beverage Management and Research
    • /
    • v.13 no.2
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

Experimental Study for the Development of the Mixing Ratio as a Compaction Pile (다짐말뚝 재료로서 쇄석과 저회의 적정 혼합비 도출을 위한 실험적 연구)

  • Leem, Hansoo;Kim, Sunkon;Lee, Jooho;Chun, Byungsik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.9
    • /
    • pp.5-16
    • /
    • 2012
  • In the case of using the soil materials created by cutting in-situ ground directly without adjusting particle size, it is recommendable to seek the compaction property or material constant required for filling design or density control through indoor test, and many studies on this subject have been carried out during that time. The researches conducted during that time, however, were focused on the mixed materials with different diameters that exist in a natural condition. There has been no study conducted using coal fly ash that is by-product of the thermal power plant that is actively considered as the building materials. Therefore, this study was aimed at implementing compaction test and examining the basic engineering property in order to explore the influence of crushing the particles through compacting the admixture of crushed stone and coal fly ash produced from thermal power plant on its engineering property, and then the impact of the admixture volume of each material on compaction property and material property by conducting the One-Dimensional Compression Test. As result of compaction test, the optimum moisture ratio of coal fly ash was shown to be approx. 23%. As result of compaction test in accordance with the mixed ratio of coal fly ash and crushed stone under the same compaction energy and moisture ratio, dry unit weight tended to drop when the mixed ratio of coal fly ash exceeded 30%, while it reached approx. $1.81gf/cm^3$ when the mixed ratio was 30%. As result of One-Dimensional Compression Test in accordance with the mixed ratio of crushed stone and coal fly ash, the change in void ratio by particle crushing was at the highest level in the case of coal fly ash 100%, while the lowest level in the case of crushed stone 100%. In the case of mixed materials of crushed stone and coal fly ash, compression index was at the lowest level in case of coal fly ash 30%, and therefore this ratio of mixed material was judged to be the most stable from an engineering aspect.

A Study on the Causality of Technology Culture of East Asian Roof Tile Making Technology Since the 17th Century (17세기 이후 동아시아 제와(製瓦)의 기술문화적 인과성)

  • Kim, Hajin
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.3
    • /
    • pp.56-73
    • /
    • 2019
  • This paper aims to establish the technical style of roof tiles by analyzing East Asian roof tile making techniques. It will examine the existing main research data, such as excavation results and the subsequent analysis of the roof tiles' production traces, as well as references and transmitted techniques. Regions are grouped according to technical similarity, then grouped again by artistic styles of pattern and shape and by the technical styles of tools, procedures, and manpower plans. Accordingly, intends to find out whether an understanding of technical style can facilitate an understanding of not only cultural aspects, but also the causality of techniques. Korean, Chinese and Japanese tools were examined, and procedures for making roof tiles were classified into 4 groups. In a superficial way, China, Okinawa, Korea, and Honshu share similar technical traits. Research of procedural details and manpower plans revealed characteristics of each region. As a result, comparisons were made between each region's technical characteristics attempting to investigate their causes. The groups were classified according to their possessing techniques, but it was revealed that East Asia's shared production techniques were based on architectural methodss. The skill of "Pyeon Jeol(Clay Cutting)" classified according to its possessing techniques, turned out to be one such technique. Also, the procedure of technical localization based on the skill of "Ta-nal(Tapping)" showed that the condition of this technique was the power to localize in response to a transfer of techniques. Previous comparison parameters of artifacts would have been a similarity of style originated from exchanges between regions and stylistic characteristics of regions decided by the demander's taste of beauty. This methodology enlarges cultural perception and affords a positive basis of historical facts. However, it suggests the possibility of finding cultural aspects' origins by understanding the technical style and seeing same result in view of "technology culture."