• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.22-27
• /
• 2004

Recently, environmental pollution has become a significant problem in industry and many researchers have investigated in order to preserve the environment. Environmentally conscious machining and technology have more important position in machining process, because cutting fluid has bad influence on the environment in milling process. This research is the experimental study on high speed machining of aluminum alloys through environmentally conscious machining. In this study, the surface roughness and chip appearance was investigated in the machining of aluminum alloys by dry machining, using cutting fluid and oil mist.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.95-99
• /
• 2003

Recently, environmental pollution has become a significant problem in industry and many researches have been investigated in order to preserve the environment. Environmentally conscious machining and technology have more and more important position in machining process. The cutting fluid has greatly bad influence on the environment in the milling process. This research is experimental study on high speed machining of aluminum alloys through environmentally conscious machining. In this study, the machinability surface roughness and chip appearance was investigated in the machining of aluminum alloys applied dry machining and using cutting fluid, oil mist.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.52-60
• /
• 1999

In this study the effect of roundness error with respect to the cutting conditions using the external cylindrical work piece by end mill cutting in a machining center was studied. the end mill used in this study is HSS coated with Ti-N which is of Ø 12-4 flutes. The material of workpiece is SM20C and cutting oil is used as a cooling flued The cutting experiments were carried out for the several cutting conditions(depth of cut height of end mill feed rate revolution per minute and cutting direction) and their roundness effects were compared using the least squares circle measuring method. The experimental results are summarized as follows : 1) The cutting depth is dominant for the roundness of a cylindrical work piece and the cutting speed must be determined precisely when the cutting depth is large 2) When the cutting direction in circular manufacturing is the same with the spindle rotation i.e up-cutting condition the surface roundness is also improved.

• 청정기술
• /
• 제19권2호
• /
• pp.184-188
• /
• 2013

기존 탄화수소계 세정제는 낮은 인화점으로 인하여 화재, 폭발과 같은 문제점을 가지고 있다. 인화점을 높이기 위해 불소가 포함된 난연성 세정제 7종을 개발하였다. 새롭게 합성한 세정제를 한국석유관리원에서 국가산업표준 방법으로 분석하여 물성을 측정하고 세정성 평가를 수행하였다. 물성 측정 결과, 인화점이 탄화수소계 세정제보다 높은 것을 확인하였다. 세정력 평가를 위하여 가로 60 mm, 세로 40 mm 크기의 스테인리스강 기판에 인발유, 아비에트산, 절삭유, 윤활유를 각각 도포하여 합성한 세정제(1~7)에 넣어 침적한 후 세정력을 평가하였다. 최대 5분간 침적하였을 때 인발유는 80~96%, 아비에트산은 82~97%, 윤활유는 86~93% 정도의 높은 세정력을 보였다. 그러나 절삭유에서는 60~87% 정도로 다른 오일보다 낮은 세정력을 보였다. 따라서 약간의 차이는 있지만 대체적으로 우수한 세정력을 보여 산업세정분야에 적용이 가능함을 나타내었다.

• 대한기계학회논문집
• /
• 제5권4호
• /
• pp.338-346
• /
• 1981

Honing, lapping, polishing and superfinishing are applied for a precision machining to finish the metal surface, but these precision machining are micro-cutting by hard and micro-abrasive grains. Frictional machining is the new method to finish mirrorlike surface without using those abrasive grains. The frictional machining produces high pressure and high temperature instantly by compressing a tool material against the metal surface in sliding motion. The metal surface is given plastic deformation and plastic flow by the above mentioned frictional motion, but the surface roughness of the metal surface is influenced by physical and chemical reaction in surrounding atmosphere. Therefore, the atmosphere around the metal optimum atmosphere in the frictional machining. The part 1 of the study was performed in liquid atmospheres. Diesel oil, lubricant, grease, lard oil, bean oil and cutting fluid were used as such atmospheres. Medium carbon steel SM 50 C was used as a workpiece and ceramic tip was applied as a frictional tool. The result of the experiment showed characteristic machining conditions to generate the best surface roughness in each atmospheres.

• 대한화학회지
• /
• 제57권4호
• /
• pp.515-519
• /
• 2013

• 청정기술
• /
• 제14권2호
• /
• pp.95-102
• /
• 2008

친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 적용하여야 하며 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 따라서 본 연구에서는 여러 세정성 평가 방법들 중 광전자방출법(optically stimulated electron emission)(OSEE)을 활용한 세정성 평가에 관한 연구를 하였다. 실험에 사용된 오염물은 플럭스, 솔더, 그리스, 절삭유, 그리고 그리스 35%와 절삭유 65%을 혼합하여 만든 혼합 오염물로서 세정제에 의한 이들의 세정성을 평가하였다. 본 연구실에서 개발하였거나 조제한 세정제를 이용하여 세정 후 OSEE법 측정 결과와 중량법 및 접촉각측정법에 의한 세정성 평가방법을 비교 분석하였다. 본 연구 결과로 플럭스와 혼합오염물을 세정한 경우의 OSEE 세정효율은 중량법과 거의 유사한 결과를 나타내었지만, 솔더와 그리스 세정의 경우는 UV를 반사 또는 흡수하여 중량법과 비교할 수 없었다. 그리고 절삭유 세정의 경우 실질적으로 눈에 보일 정도로 피세정물 표면에 오염물이 남아 있음에도 불구하고 중량법 측정 시 100%의 세정효율을 보임으로써 중량법 측정의 한계를 보였지만 OSEE법으로는 미소잔류 절삭유의 존재를 측정할 수 있었다. 또한 OSEE법과 접촉각측정법의 세정성을 비교측정한 결과로 플럭스, 혼합 오염물 그리고 절삭유의 세정성 평가는 OSEE법과 접촉각측정법이 유사한 세정효율을 보여주었다. 그리고 솔더와 그리스 세정은 접촉각측정법이 OSEE법보다 더욱 정밀하게 세정성을 평가할 수 있는 것으로 판단되었다.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1654-1660
• /
• 2009

본 연구에서는 연속회분식반응조 (Sequencing Batch Reactor, SBR)를 이용하여 친환경성 절삭유라는 이름으로 시판되는 절삭유 2종 (H사, B사)의 생물학적 처리능을 평가하였다. H사의 절삭유를 응집/응결 전처리 ($H_1$)하여 0.04-0.08kgCOD/kgMLSS d의 F/M비로 SBR로 유입한 경우, $BOD_5$와 $COD_{Cr}$의 평균 제거율은 각각 97%, 91%이상을 나타내었으며, T-N, T-P의 평균 제거율은 각각 76%, 81%이상을 나타내었다. B사의 절삭유를 희석한 후 ($B_1$) 0.01-0.02kgCOD/kgMLSS d의 F/M비에 맞추어 SBR로 유입한 경우, $COD_{Cr}$의 평균 제거율은 77% 이상을 나타내었다. 응집/응결 처리된 절삭유 (B2)를 0.01-0.04kgCOD/kgMLSS d의 F/M비에 맞추어 유입한 경우, $COD_{Cr}$의 평균 제거율은 85%이상을 나타내었다. 이후 실제 처리장에서 폐절삭유를 처리할 때 오수와 합병하여 처리하는 상황을 반영하기 위하여 $B_2$와 합성폐수를 혼합하여 ($B_3$) 0.09-0.11kgCOD/kgMLSS d의 F/M비에 맞추어 유입하였을 때, $BOD_5$와 $COD_{Cr}$의 평균 제거율은 각각 97%, 98%이상을 나타내었고 T-N, T-P의 평균 제거율은 각각 79%, 76%이상을 나타내었다. 그리고 생물학적 처리를 거친 $H_1$과 $B_3$에 대한 각각의 유출수의 ($COD_{Cr}$-$BOD_5$)/$COD_{Cr}$비는 각각 85%와 61%정도로 난분해성 유기물이 잔존하고 있는 것을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2018

In drilling Inconel 601, which is used for compressor cases in aircraft engines, a lot of cutting oil must be supplied. This prevents tools from wear and fracture due to the heat buildup resulting from the high-temperature resistance and toughness of this alloy. However, the cutting oil supply has compromised the machining environment. This has caused attention to shift to an environmentally friendly cutting fluid supply system called the Minimum Quantity Lubrication(MQL) system. The aim of this study was to find a more efficient drill processing method using MQL and to verify its performance. To that end, the properties of Inconel that make it difficult -to -drill were studied by a comparison with the drilling of SM45C. Specific factors (i.e., cutting force and tool wear) were examined in relation to the conditions in the MQL-based drilling system. Based on these results, a sealed cover and step feed were proposed as measures to increase the effectiveness of the MQL system. The efficiency of the proposed method was established.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.83-91
• /
• 2006

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. One of the technologies is known as MQL(Minimum Quantity Lubrication) machining. This research presents an investigation into MQL machining with the objective of deriving the optimum cutting conditions for the turning process of SM4SC. To reach these goals several finish turning experiments were carried out, varying cutting speed, feed rate, oil quantity and so on, with MQL and flood coolant. The surface roughness and cutting force results of tests were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance(ANOVA). From the experimental results and ANOVA, this research proposed optimal cutting conditions to improve the machinability in MQL turning process.