• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4637-4641
• /
• 2023

For nuclear decommissioning applications, a study was conducted to investigate the feasibility of using a laser for long-distance cutting in complex structures. Cutting tests were performed on stainless steel plates with thicknesses ranging from 10 mm to 30 mm at distances of 300 mm-700 mm from the laser head, using a laser power of 6 kW. Remarkably, the 10 mm and 20 mm thick stainless-steel plates were successfully cut at a distance of 700 mm from the head. Based on the trends observed in the results, it is anticipated that these thicknesses could also be cut at distances of approximately 1 m. Similarly, the 30 mm thick stainless-steel plate was effectively cut at a distance of 500 mm from the head. To evaluate the amount of secondary waste generated, the kerf width was measured. Due to the long-distance cutting, the average kerf width ranged from 6 mm to 16 mm. Despite the wider kerf width, long-distance cutting holds promise for efficiently handling hard-to-reach targets in nuclear decommissioning scenarios.

• 한국초지조사료학회지
• /
• 제12권2호
• /
• pp.98-103
• /
• 1992

With a purpose of finding out the effects of cattle slurry application on thc nutrient contents of herbages and energy productivity in grassland, a field experiment was conducted with two times and five levels of cattle slurry application. The experimental field was designed in a split-plot with threc replications, and lasted from September, 1986 to October, 1990 at the Livestock Experiment Station in Suweon, The results obtained are summarized as follows: 1. The net energy(NEL, StE and TDN) contents of grasses in the plots with cattle slurry application just after cutting were slightly higher when compared to manuring 15 days after cutting. but DCP content has reverse trend. 2. Average net energy(NEL. StE and TDN) and DCP production of the plot with cattle slurry application 15 days after cutting were insignificantly increased by 26 % than those of manuring just after cutting. The energy and DCP yields in the plot with cattle slurry and with slurry + mineral fertilizer were decreased by 21 -27 % and 8- 11 %, respectively than those of the plot with single dressing of mineral fertilizer. 3. Mineral contents of grasses were not significant difference among the treatments of cattle slurry. but considering nutrient balance of animals, application of cattle slurry of 30-$60m^3$/ha with mineral fertilizer was profitable as compared to the other treatments.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.189-190
• /
• 2017

For the concept design of the device, a tool was made to test the simulated fuel rods and cutting force and the cutting force was measured. When 2-CUT and 3-CUT modules were used, the maximum force in 2-CUT at 12.5 mm/s speed change was $197.5kg_f$ and the maximum force at 3-CUT was $363.2kg_f$. The change of force in 2-CUT rapidly increases from about 1 second, and you can see that there are increase and decrease of the force change from about 5 seconds to 18 seconds, and it was rapidly decreased and the cut was made. The force change in 3-CUT has higher force at about 5 seconds later than 2-CUT at the speed of 12.5 mm/s, and you can see that it has the same tendency afterwards. If you search for the force at adequate speed from this cutting force test, 2-CUT module requires less slitting force than 3-CUT module, and the cutting time for 250 mm at 12.5 mm/s was 21 seconds, which can cut 4 m fuel rod in 5 minutes. But, there are cases of not completely slitting with 2-CUT module, so it is necessary to supplement this in the future through experiments.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.386-396
• /
• 2022

로드헤더에 미치는 변수의 영향력을 분석하기 위해 픽커터 절삭시험 관련 참고문헌들을 조사하였고, 수록된 데이터들을 수집하였다. 입력 인자는 일축압축강도, 절삭 깊이, 절삭 간격, 받음각, 비틀림각, 출력 인자는 비에너지, 절삭력, 수직력으로 결정했다. 입력 인자와 출력 인자로 분류 후 실험계획법을 작성하였고 분산분석을 이용해 변수들에 대한 기여도를 조사하였다. 그 결과, 절삭력과 비에너지에 가장 큰 영향을 미치는 요인은 일축압축강도와 절삭 간격으로 분석되었다.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.30-34
• /
• 2017

The trend of the plasma cutting and laser cutting technology of metal alloys including high strength steel, aluminum alloys for the welding structures has been studied. The high-precision plasma systems offer a denser, higher energy arc that in effect produces a sharper cutting tool and high quality cutting products. The high-quality fiber laser systems with compact design and easy set-up make it ideal for cutting in the pipeline or steel structre manufacturing. This paper covers the scientometric analysis of the high efficient cutting technology which are based on the published research works in the 'plasma and laser', and 'cutting technology' obtained from Web of Science, and deals with the details of the background data of the plasma cutting and laser cutting technology.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.22-27
• /
• 2012

Drilling process is usually the most efficient and economical method of making a hole in a solid body. However, there have been no analytical method to assess drilling process based on the shear and frictional characteristics. In this paper, procedures for analyzing shear and frictional processes of drilling have been established by adopting an equivalent turning system to drilling. A series of drilling experiments were carried out with varying feed, velocity and drill shape factors. Using the results of the experiments, the cutting characteristics including shear in the primary shear zone and friction in the chip-tool contact region of drilling process have been analyzed. The specific cutting energy tends to decrease exponentially with increase of feed rate. In drilling process 35-40% of the total energy is consumed in the friction process. This is greater than that of turning process in cutting of the same work material.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.55-58
• /
• 2002

Rapid Prototyping(RP) systems, that fabricate objects with slicers, typically bear staircase artifacts when slices has a certain degree of thickness. A tangential cutting algorithm is developed in order to remove surface distortion as well as to generate smooth laser-cutting trajectory. For this, an energy function is defined with tangential line length and distance between tangential line and middle contour. Then, the energy is minimized to generate effective tangential line segments. The proposed algorithm is tested and verified on 3D object samples and the results show that the generated tangential lines effectively approximate layer surface and make laser trajectory smooth.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.80-86
• /
• 2004

With the increasing demand of environmentally clean machining in recent years, the use of coolants has been restricted extensively. In this paper, a multiple comparison method(Tukey's HSD method) is proposed to choose the optimum level of coolant necessary for an efficient and environmentally clean machining. The cutting temperature, specific cutting energy, and surface roughness in turning process are analysed by ANOVA(Analysis Of Variance) and Tukey's HSD method. From the experimental results and statistical analysis, it is found that the optimum condition of coolant level is 10 ml/min with 6% mix ratio, which is almost half of the commonly used level.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1910-1920
• /
• 1993

An experimental study to investigate the unconventional chip formation called triangulation of chip in cutting with a SPRT (self-propelled rotary tool) is performed using acoustic emission (AE) signal analysis. In doing that, a quantitative model of the AE RMS signal in triangulation with a SPRT is first developed. The predicted results from this model show good correlation between the AE RMS signal and the general characteristics of triangular chip formation. Then, effects of various process parameters such as cutting conditions (cutting speed, depth of cut, oblique angle and normal rake angle) and the work material properties on the chip formation in cutting with a SPRT are explored. Special attention is paid to the work material properties which are found to have significant effects on triangulation.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.247-252
• /
• 2008

A laser glass cutting system using a femto-second laser was evaluated for Flat Panel Display (FPD) glass. A theoretical analysis of the ablation threshold and depth is described using an explicit analytic form. Experiments for clean and deep grooves were performed using a 3W femto-second laser, and the relationships between the input energy and the scribing depth as well as the threshold energy are presented. Mechanical breaking after the scribing process was carried out and the results are compared with a theoretical method. It was found that a two-sided LCD panel glass can be cut clearly using the laser cutting method. The methodology was found to be very effective as a mass-production cutting system.