• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.30-41
• /
• 1987

The geometrical shape of a plow bottom may be the most important factor affecting the performance of a plow for a given soil and operating conditions. There are various designs of the Jaenggi (Korean plow) available commercially, which may be different from each other and from the plow (Western plow) in respect to the shape and performance. This study was intended to investigate the geometrical characteristics of Jaenggi. The coordinate digitizer equipped with 3 potentiometers was designed and manufactured for measurement of the shape of curved plane of moldboard and share. The digitizer was connected to a microcomputer having the data acquisition system. This device was used to analyze the plow bottoms of 5 differently-made Jaenggis and one cylindrical plow. The results of the study are summarized as follows: 1. It was possible to measure easily and quickly the curved plane of plow bottom and to plot the view on three major plans using the coordinate digitizer electrically connected to a microcomputer system. 2. The shape of five Jaenggi bottoms analyzed could be characterized by the cutting angle having the range of $33-42^{\circ}$, the maximum share-lift angle of $41-50^{\circ}$, and the setting angle of moldboard wing of $46-70^{\circ}$. The most critical difference of the shape factors between the Jaenggi and the plow was found in the maximum share-lift angle, the former was more than twice as much as the latter. 3. The analysis of the shape of Jaenggi bottoms showed that the share projections on 3 major plans had a varied triangle, which was quite different from that of plow bottom. Especially, it was analyzed that the shape of furrow slice for the Jaenggi had a skewed rectangle, leaving a considerable height of the ridge at the furrow bottom. 4. The dihedral angle was similar range of $30-85^{\circ}$ for the all bodies investigated, but the directional angle was somewhat different from each other. The difference in directional angle was $5^{\circ}$ for the plow, $20^{\circ}$ for the Jaenggi A and $30^{\circ}$ for the Jaenggi B. 5. Area of the spherical representation region was 0.0328 for the plow, 0.1194 for the Jaenggi A and 0.1716 for the Jaenggi B. This may indicate that the plow came close to a working surface and the Jaenggi A and the Jaenggi B departed from a working surface to a somewhat greater extent.

• Journal of Fashion Business
• /
• v.8 no.2
• /
• pp.69-90
• /
• 2004

The purpose of this study is to find the recognition of Korean image fashion design by U.K fashion specialists. U.K is one of the important countries in design field including fashion design since 1960. For this purpose, literature research and focus individual interview research were carried. First, through the researches precedent, it was found that a national image is related with it's design industry and what is Korean image fashion design, were studied. Second, for individual interviews to 13 U.K fashion specialists, who are teaching and researching in University that has postgraduate course over M.A and had industrial experiences from 7years to 22years, were progressed using open questions and visual image stimulus. The open questions were consisted with four parts : personal educational and industrial background, recognitions about oriental fashion, recognitions about Korean image and Korean fashion design before seeing the visual stimulus, recognition about Korean image fashion design and the characteristics of Korean after seeing the visual stimulus. The results are as follows; First, the 12 U.K specialists have recognized 'oriental fashion' is one of important fashion trends now a days. Japan and Japanese designers are recognized as a represented nation and designer in oriental fashion by them. Two of the specialists referred to need changing the term 'oriental' because the term has been used in the sights of western from colonial age and Japanese is not included the oriental any more. Secondly, 11 interviews have recognized nothing about the Korean national image some of them has negative image due to political situation in Korean Peninsula. However 2 interviews who had been Korea before has positive image. In the questions about Korean fashion and Korean fashion designers, 10 of 13 interviews have nothing and negative recognitions. So it was founded that Korean fashion design was recognized as a lower level by U. K. fashion specialists. Thirdly, in the questions about Korean fashion image and the design characteristics of Korean fashion after seeing the visual stimulus, the response was represented two directions. One is about over decorative image through ethnic design and the other is about simple image differ from Japanese. The 13 interviews felt the Korean Image fashion design such like traditional, decorative, opulent, flat cutting, fresh proportion, loose, layering, natural, simplicity, complicate, adventure, easy, stylish, soft, feminine, young image, adult sexy image. The images were analyzed five image groups : adult sexy image, adult ethnic image, natural image, young avant-garde image, young simple casual image. No one preferred the adult sexy image, adult ethnic image and natural image. However 10 interviews preferred young avant-garde group and 13 interviews preferred the young simple casual image. So this group can be understanded and useful informed as one of competitive power in global fashion industry.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.65-73
• /
• 2013

The information of cut slope in Mt. Jang area, Busan is investigated in order to construct the Slope Management System in Urban Area. The slope inspection sheet is made to record the characteristics for cut slopes, and that is capable to be inputted slope information systematically. The cut slopes in Mt. Jang area are consisting of 69 slopes. Most of the cut slopes are constructed in cutting slope and retaining wall (CR). The cut slopes located in housing facilities are 46 slopes, and the slopes located in school facilities are 12 slopes. The traverse of cut slopes is mainly ranged from 50 m to 150 m, and the height is mainly ranged from 10 m to 20 m. The slopes combined with soil and rock are mostly distributed. The retaining wall was installed in the toe part of cut slope in order to increase the slope stability, and the additional reinforcement methods including the anchor, drainage, preventing rock fall, shotcrete and vegetation were installed at the toe part of cut slopes.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.2
• /
• pp.115-135
• /
• 2011

Fe-Ti ore bodies and mafic granulite occur in the Sancheong anorthosites, south Korea. In order to determine their petrogenetic relationship and to classify the Fe-Ti ore bodies, we have synthetically analyzed characteristics in the field, such as distribution and occurrence, and petrologic features through detailed outcrop sketches. The ore bodies are divided into the regular vein dike- and irregular veinlet swarm types, according to their characteristics of contact with the anorthosites and internal structures. The former shows the tabularly intrusive contact and the pervasively ductile-sheared interior, while the latter, the irregularly tortuous contact and the almost intact interior. Most of the ore bodies are cross-cutting the foliation of the anorthosites and possess abundant anorthositic xenoliths, indicating their intrusion after the formation of foliation in the anorthosites. The mafic granulite, also bearing abundant anorthositic xenoliths, shows interior foliations nearly parallel to intrusion contact, and has abundant ilmenites approximately the same as those of the Fe-Ti ore bodies in chemical composition. And its intrusion into adjacent anorthosites is observed and the intrusion is finally changed into an irregular veinlet swarm type ore body. It is, thus, interpreted that the granulite in the study area was the host material of Fe-Ti ore bodies.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.540-551
• /
• 2019

This study was conducted to provide basic data for classifying patterns of land creep in 37 areas in South Korea using geological and soil property analyses. Geological time, as it relates to land creep areas in South Korea, had been most impactful for the Gyeongsang Supergroup and its sedimentary bedrock during the Cretaceous period. In this area, perfect ridge cliffs in land creeping areas included 20 plots (approximately 54.0%), while tension cracking areas with ambiguous ridge cliff characteristics included 17 plots (approximately 46.0%). Hesitant slide slope types included 20 plots (approximately 54.0%) within theslide slope of an incident pattern (slide slope figure) in land creeping areas. Colluvial debris types among land creep patterns were the most frequent and included 25 plots (approximately 68.0%). The direct causes of land creep were cutting of foothills, quarrying, land-clearing in mountains, mining exploration, and the creation of burial grounds, all of which added to geological impacts. Among land creeping areas, 27 plots (approximately 73.0%) were the result of man-made activities, and 10 plots (approximately 27.0%) were derived via natural causes such as earthquakes, heavy rainfall, and caving.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1152-1157
• /
• 2001

Two kinds of samples were prepared from the loin in the carcass with grade B2 and D, which were chilled for 24 hour after slaughter. The fresh beef in this study were obtained by chilling the loin for 1 day after wrapping them. On the other hand, the chilled beef were obtained by cutting the loin by 500 g and chilling them for 30 day after vacuum packing. The experiment was carried out to compare the palatability related with characteristics of loin with grade B2 and D and to investigate the chilling effect of the loin with grade D. In the case of fresh beef, it was found that the loin with grade B2 has better meat color, but lower pH, lactic acid content, and myoglobin content, than them of the loin with grade D. Also, the loin with grade B2 has lower tenderness due to its low hardness and chewiness, and high myofibrillar fragmentation index (MFI). Furthermore, it has high monounsaturated fatty acid/saturated fatty acid (MUFA/SFA) and ATP content, and good raw meat aroma. It also shows an excellent palatability of cooked meat, although it has low cooking loss and heat shotening. On the other hand, the loin with grade D has higher chilling effect on hardness, chewiness, MFI and MUFA/SFA, than them of the loin with grade B2. However, in the case of chilled beef, the loin with grade D shows much worse tenderness, cooked meat aroma, and palatability than them of the loin with grade B2.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.148-152
• /
• 2008

Multichannel seismic profiles reveal a strong bottom simulating reflector (BSR) occurring below the seafloor in the plain of the Ulleung Basin, East Sea (Japan Sea). The essential characteristics of the BSR include its cross-cutting relationship to strata, strong amplitude, and reverse polarity with respect to the seafloor reflection, representing the base of the gas hydrate stability zone (BHSZ). The BSR reflection coefficient ranging from -0.23 to -0.26 is 1.5${\sim}$1.7 times that of the seafloor reflection and interval velocities decrease to less than 700 m/s below the BSR. These features indicate the existence of free gas beneath the GHSZ. Heat flow, estimated from the BSR depth as $95{\sim}98mW/m^2$, is in good agreement with measured values. Therefore, the BSR can be efficiently used to estimate regional distribution of heat flow in the Ulleung Basin.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1999

The $n^+/p/p^+$ junction PERL solar cell of $0.1{\sim}2{\Omega}{\cdot}cm$ (100) p type silicon wafer was fabricated through the following steps; that is, wafer cutting, inverted pyramidally textured surfaces etching by KOH, phosphorus and boron diffusion, anti-reflection coating, grid formation and contact annealing. At this time, the optical characteristics of device surface and the efficiency of doping concentration for resistivity were investigated. And diffusion depth and doping concentration for n+ doping were simulated by silvaco program. Then their results were compared with measured results. Under the illumination of AM (air mass)1.5, $100\;mW/cm^2$ $I_{sc}$, $V_{oc}$, fill factor and the conversion efficiency were 43mA, 0.6 V, 0.62. and 16% respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.869-878
• /
• 2007

The purpose of this study was to investigate perception of risks among South Korean female college students within the process of purchasing apparel products through the Internet. The study was implemented by descriptive survey method using questionnaire and subjects consisted of 324 South Korean female college students. Findings of the study showed that the purchasing process particularly regarding delivery and security issues seemed to be a strong concern. On the other hand, unique selection such as apparel brands only available through the Internet was a strong appeal to 37.7% of subjects. Factor analysis profiled risk perception as: 1) Internet Shopping Selection Preference, 2) Delivery Problems and Lack of Security 3) Product Quality and Characteristics 4) Return Policy Difficulties and 5) Fair Prices. Discriminant analysis showed Factors 1, 2 and 3 were significant in helping to differentiate among Non-Purchasers, Fewer-purchasers and Many-Purchasers. Factor 1 and 3 helped differentiate among respondents relative to age range. Across all types of purchasers, offering unique selections of cutting edge fashions and improving risk perception relative to delivery and security concerns seemed important for gaining greater market share. Being able to delivery quality products and communicate product characteristics would be a powerful competitive edge to add to the incentive of convenience in shopping for apparel on the Internet.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.552-555
• /
• 2009

A new standard rose cultivar "Snow Day" was bred from the cross between pink standard cultivar "Saphia" and pink standard cultivar "Bridal Beauty" at the National Institute of Horticulture & Herbal Science. The cross was made in 2003 and "Snow Day" was finally selected in 2008 after evaluating characteristics for three years from 2006 to 2008. A white standard cultivar, "Snow Day" grows vigorously and resistant to powder mildew. The major characteristics of this cultivar are $152stems/m^2/year$ in yield, 81.8 cm in length of cut flower, 11.3 cm in flower diameter, 29.2 in petal number, and 13.7 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference for this cultivar is relatively higher than that for the control cultivar, "Tineke".