• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.794-797
• /
• 2004

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions (-20, -10, 0, 5, 10, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about 4 type waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature after TAS test were observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. Also, correction coefficient of TAS with temperature were calculated using 4 type waterproofing membrane. It could be shown that the higher TAS and shear adhesive strength, the lower temperature, regardless of the type of waterproofing membrane. Temperature sensibility of TAS was especially remarkable in epoxy membrane. Failure type was occurred the ductile failure in $30^{\circ}C\;and\;40^{\circ}C$. From these results, it was shown that if ambient temperature above $30^{\circ}C$ maintains for a long time, waterproofing membrane will be deformed by softening. Otherwise, waterproofing membrane in temperature below $20^{\circ}C$ shown that occurred the brittle failure. From the results of visual observation of cutting surface for specimen, the thin waterproofing membranes shown indented by hot aggregate of the asphalt mixtures. Therefore, it could be known that the specification of waterproofing membrane thickness is necessary by waterproofing membrane type. As temperature change varied with pavement depth, the interface temperature was more important than ambient temperature in TAS test. Now, TAS test results were limited only in $-10^{\circ}C\;and\;20^{\circ}C$ temperature, but correction coefficient of TAS by ambient temperature could be used as a solution to deal with this problem.

• Korean Journal of Organic Agriculture
• /
• v.8 no.1
• /
• pp.89-99
• /
• 1999

To do mass multiplication of plug seedlings in potatoes, apical stem cuttings originated from virus-free microtubers were cut to one-two internodes and transplanted into the plug-tray. After 10days, we applied Chitosan and Wood Extraction on rooting and tuber formation of plug seedlings. To improve field adaptability of plug seedlings, rooted cuttings with a height of 20cm after 20days of cutting were transplanted ito the fields, We applied 500~2000ppm Chitosan on growth characteristics and tuber formation of that. The above and underground growths, such as plant height and number of leaves were significantly more vigorous after treatment with 500~1,000ppm Chitosan and 2,000ppm Wood Extraction, the spray treatment was carried out five times at intervals of four days after ten days of transplanting. T-N, K, P, Mg and Na, were higher as the concentrations of chitosan and Wood Extraction were higher. The growth and tuber yield in plug seedlings planting plot and seed potatoes planting plot were effectively highter as foliar application of Chitosan(500~2,000ppm) was done after planting the plot. T-N content in leaves and tuber was higher as the concentration of Chitosan was high. A similar tendency was shown in K, P and Mg. In the small tuber(under 30g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot, but the large tubers(over 80g) yield was higher in the plug seedlings planting plot, and in order to increase tuber yield in plug seedlings it was necessary to add plant density to the field.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.56-61
• /
• 2020

Recently, research for machining next-generation micro semiconductor processes and micro patterns has been actively conducted. In particular, it is applied to various industrial fields depending on the machining method in the case of FIB (Focused ion beam) milling. In this study, intends to deal with FIB milling machining technology for ultra-precision diamond tool fabrication technology. Ultra-precision diamond tools require nano-scale precision, and FIB milling is a useful method for nano-scale precision machining. However, FIB milling has a problem of Gaussian characteristics that are differently formed according to the beam current due to the input of an ion beam source, and there are process conditions to be considered, such as a side clearance angle problem of a diamond tool that is differently formed according to the tilting angle. A series of process steps for fabrication a ultra-precision diamond tool were studied and analyzed for each process. It was confirmed that the effect on the fabrication process was large depending on the spot size of the beam and the current of the beam as a result of the experimental analysis.

• Korean Journal of Human Ecology
• /
• v.23 no.3
• /
• pp.467-481
• /
• 2014

We investigated the effects of Mulberry leaves fermented enzyme liquid(MLE) addition on the quality of Kimchi which were fermented at $5^{\circ}C$ during 30 days. MLE was added to salted cabbage at concentrations of 0%(C), 0.4%(MLE1), 0.8%(MLE2), and 1.2%(MLE3) (w/w). pH in Kimchi added upon 1.2% of MLE, was higher than that of Kimchi without MLE after 12 days of fermentation. The titratable acidity was increased by the addition of MLE, and particularly Kimchi added 1.2% of MLE showed the slowest changed level. The degree of salinity were decreased in Kimchi with MLE as well as control group. However, MLE1 showed significantly lower salinity than MLE2, MLE3 and control group (p<0.001). L, a, b values of control group indicated significantly higher than the Kimchi with enzyme liquid concentrations(MLE1~MLE3). As compared with the control group, the cutting force in treated groups were increased during the fermentation period, and especially MLE3 showed the highest value of hardness. Moreover, that growth of lactic acid bacteria and total bacteria were inhibited by the addition of MLE. In the sensory assessment, the color, taste, and overall preferences were higher in MLE2 than control group and MLE1, MLE3. The acceptability of MLE as an additive in Kimchi among middle school students was higher than in the control sample, with an optimum additive of 0.8% MLE, based on the lowest volume of leftovers. Therefore, it was confirmed that addition of 0.8% MLE appears to be an acceptable approach to enhance the quality of Kimchi without reduction of acceptability.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.296-302
• /
• 2004

After the Rio declaration on environment and development in 1992, developed countries are undertaking 'environmentally sustainable transportation (EST)' projects. To meet the needs for EST, current transportation policies in Korea are rapidly reforming and one of its concerns is modernizing and upgrading railway freight system. Planning new railroad construction projects is increasing and subsequent environmental impact assessment (EIA) demands improvements, especially in both the EIA and decision making systems. In this paper, we discuss the present status of EIA for railroad construction projects, especially, by analyzing the EIA documents accumulated for last six years. The EIA for railroad construction projects .accounts for only $4.9\%$ of total project EIAs during 1998-2003. However, the portion is gradually increasing. Major environmental concerns for EIA in railroad construction projects were geomorphological and ecological changes, protection of rare organisms, air pollution, water quality, wast management, noise, etc. We also compared the characteristics of environmental impacts of railroad construction with those of vehicle road construction. The result shows that railroad construction usually requires 3${\~}$4 times longer tunnels and bridges for a given length than vehicle road construction. In addition, the amounts of geomorphological and ecological changes (road-cutting, embankment, devegetation, etc.) in railroad construction were generally less than $40\%$ of those in vehicle road construction. In order to develop environmentally friendly railway systems, monitoring studies for environmental impacts of railroads such as habitat fragmentation and road kills, dispersal of alien plants, tunnelling effects on groundwater and vegetation, and noise impacts are highly required.

• Journal of The Korean Association of Information Education
• /
• v.12 no.2
• /
• pp.141-149
• /
• 2008

Congruence of figure is a basic to learn a symmetrical figure and helps to understand the characteristics of figure and know the way of drawing figures. The knowledge of congruence provides us art attainments to understand design and fine pieces of art. However, it is difficult to expect the interaction between students or between teachers and students, because of spending too much time for cutting papers and making the shapes of figure during the class for establishing the concepts. This study utilized a question-based interaction model which would foster elementary school student's learning effectiveness and make them understood the concept of congruence, also developed a congruence learning system which could communicate in both synchronous and asynchronous situation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.174-183
• /
• 2000

This study was performed to investigate the characteristics of soft tissue profile of the class III malocclusion and to test the yardstick far differential diagnosis between surgical and orthodontic patients. Initial lateral cephalograms of orthodontic group(30 patients) that have acceptable occlusion and profile by orthodontic treatment alone and surgical group(30 patients) that have favorable occlusion and profile by combined surgical-orthodontic treatment were selected in Ajou university hospital. Powell and Burstone II analysis were made on the tracing. Descriptive, comparative, factor, cluster, and discriminant analysis were carried out with computer program. The results were as followings : 1. Patients who received surgery had a more concave profile and a longer lower facial height than patients who received orthodontic treatment alone. 2. Nasolabial angle, ratio of vertical height, and mentolabial sulcus were significantly different at the 5% level. And facial protuberance, upper lip protuberance, mentocervical angle, nasofrontal angle, nasomental angle, mandibular vertical height, angle between cervix and lower face, ratio of mandibular vertical height divided by cervical depth, ratio of vertical height between upper and lower lip, and maxillary protuberance were significantly different at the 1% level. 3. 8 factors were extracted and factor 2, 3, and 8 showed significant differences by factor analysis. 4. Orthodontic group (25) and surgical group (35) were classified by cluster analysis. 5. Discriminant function was D = 0.079Nasomental angle + 0.081Sn-Gn + 3.343Sn-Gn/C-Gn + 1.734Sn-St/St-Me' -26.460, and cutting score was 0, so we can discriminate that orthodontic group has the score above 0, and surgery group below 0. And 91.7% of original grouped cases were correctly classified.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.179-189
• /
• 2014

Peplums have a great advantage in easy styling for wearers to acquire desired physical and reminiscent images depending on the type and where it is placed on the waist line. However, the study of peplum blouses has not yet recognized. This study suggests a baseline data for visual appraisals as a determined key factor is changes. The result of this study as follows: First, peplums published between 2012 through 2014 collections are used for decorative effects on tops or bottoms as the finest decoration details of fashioning women's physical attractiveness. Its application has been extended to various fashion themes such as belts and overskirt that are made of peplum itself. Second, peplums published between 2012 through 2014 collections have close correlation of how the position, shape, and length of peplums are attached on bottoms. Peplum effects are categorized as extension of tops, expansion of bottoms, connections of tops and bottoms, and separation of tops and bottoms. Third, total of seventy nine peplum blouses that are found in the domestic online shopping mall are analyzed. The total length of peplum blouses are generally produced to 56 to 61cm, which is little shorter than or approximately equal to the hip line of women aged in between twenty to twenty four. In addition, the most popular peplum design is made of flare and cutting lines on the waist line and is 45.56% of samples. The most common location of peplums is identified as 3 to 6 cm above the natural waist line or the natural waist line and is 78.47% of samples. Fourth, the key factor of peplum blouse that can significantly influence the visual image is the total length of blouse, position of peplum, and peplum shape.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.51-72
• /
• 1998

Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.881-894
• /
• 2015

The silver generation have clothing style of optimal daily life comparing than young generation because they do not participate a specific sport event but daily- life exercise. As the human body ages, the figure of the silver generation shows different body shape because upper body changes to curved figure including the belly and waist part. Therefore, clothing characteristics for the silver generation should be considered with proper function, design and textiles to optimize body movement. This study investigated various exercise types according to motion analysis of the silver generation in order to develop the design of the active T-shirts reflecting the structural properties and providing the optimum exercise circumstance. The results to consider design needs are as followed; As the T-shirts design for the flexible exercise which required frequent movement of upper body such as bending and waist twisting during body stretching, a stretch fabric applied to the waist part considering T-shirts allowance and length to make extreme elongation and support for well-fitting appearance of the T-shirts. As the T-shirts design for the instantaneous reactionary exercise, high elastic four-way stretch fabric is applied to the part of arm hole to optimize skeletal and muscle movement for entire body and arm work. As the T-shirts design for the endurance exercise such as climbing, cycling, and walking, the shoulder line of the back part has cutting line allowance to make optimum movement of the upper body but no change of the waist part.