• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2114-2121
• /
• 1995

Surface generation model of three types of endmills is introduced to analyse the cutting mechanism of an endmill more accurately. Superposition method is introduced to define the effective cusp including the effects of cutter mark. Through the comparison of three endmills, it is shown that the ball-nose endmill is superior to the ball endmill and the flat endmill for inclined milling process in 3-or 5-axis machining modes. By using the objective function minimizing the machining time, appropriate nose radius is selected for various cutter radiuses and cutter inclination angles.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.77-82
• /
• 1998

The Part of slot on rotary compressor which plays an important part of the reliability and performance is studied on machinability and the wear characteristics for the specimen made by sand mold and permanent mold. The experiment are used the face cutter of milling machine which make the processing surface like broaching process and rollblock wear test machine. Permanent-mold casting iron is not affected by variation of RPM of milling machine, but sand-mold cast-iron is improved to increasing RPM. Also sand-mold casting iron shows superior wear characteristic to permanent-mold casting iron. This results from harder matrix of pearlite structure and self-lubrication characteristics of graphite. And wear particles in tested oil show shape and size similar to severe wear particles of oil taken from rotary compressor. The material and surface condition of slot play important part of the reliability and performance.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.28-37
• /
• 2004

An on-line monitoring system of endmill failure such as weal, chipping, and fracture is developed using AE, cutting force Characteristic variations of AE and cutting force signals due to endmill failure are identified as follows. When endmill fracture occurs, AE count rate shows a rapid Increase in conjunction with a subsequent decrease while a standard deviation of the principal cutting force Increases significantly. The increase of AE count rate precedes the Increase of standard deviation of principal cutting force. Chipping results in relatively small increase and decrease of AE count rate without any significant variation of the cutting force Gradual increase of AE count rate and mean principal cutting force are Identified to be related with the wear of cutter. A cutter fracture detection algorithm is developed based on the present results. The signals me normalized to enhance the applicability of the algorithm to Wide those of fresh cutters, and qualitative characteristics of AE signals encountered at the moment of fracture are employed. It is demonstrated that the algorithm can detect the cutter fracture successfully.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.62-67
• /
• 1999

In milling, cutting tool ins directly attached to spindle and this tells that spindle can provide very useful information on the cutting tool condition such as wear or breakage. Since spindle is rotating at a high speed, measuring spindle velocity using a noncontacting measurement system gives the best information which can be obtained. Due to the force applied to spindle through cutting tool, velocity of spindle changes. And any change in cutting tool condition affects cutting force and consequently spindle vibration. With the intent of continuously monitoring cutting tool condition in intermittent machining operations in a benign manner, a noncontacting velocity measurement system using a laser Doppler velocimeter was assembled to measure spindle torsional vibration. Spindle vibration was measured and analysis of it in the frequency domain yielded a measure which corresponded to amount of cutting tool wear in milling.

• 터널과지하공간
• /
• 제33권5호
• /
• pp.425-434
• /
• 2023

TBM 디스크 커터의 마모량을 실시간 계측하기 위해서는 센서를 이용해 계측을 자동화하는 것뿐만 아니라, 계측된 데이터를 후방의 정보처리시스템에 안정적으로 전송하는 것도 중요하다. 본 연구에서는 TBM 커터헤드에 설치된 센서로부터 챔버 후방에 설치된 수신기로 데이터를 무선 전송할 때 저전력 블루투스(Bluetooth Low Energy, BLE) 기술의 활용 가능성을 검토하였다. 실험실 모사 실험을 통해 송신기의 신호강도, 송신기와 수신기 사이의 거리, 챔버 공간에 채워진 물질의 종류에 따라 변화하는 수신기의 신호 수신 강도(Received Signal Strength Index, RSSI)의 특성을 분석하였다. 송신기의 신호강도를 0 dBm 이상으로 설정하면 실험에서 고려한 모든 이격거리 조건과 챔버의 상태 조건에서 데이터를 무선 전송할 수 있었다.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.24-29
• /
• 2017

This paper provides an experimental analysis on the breakage of the coated tool using the face-milling cutter of the machining center due to changes in the cutting speed and the feed rate. The experimental studies were conducted using STS 304 materials and the damage to the tool was analyzed according to the change in machining time. The experiments confirmed that the cutting speed and feed rate affected the tool damage and the mechanical impact and thermal shock were determined to severely damage the tool. From the production engineering point of view, it has been experimentally investigated that the increased feed rate significantly influences the material removal rate more than the increased cutting speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 Handout for 2000 Inter. Machine Tool Technical Seminar
• /
• pp.51-60
• /
• 2000

High-speed milling machine is being sold mainly in the market of die and mold industries, because it reduces machining time greatly as proportion to the spindle speed of machine tool. From the experimental milling tests, it has been cleared that the ball end mill is quite suitable for high speed milling and also tool wear reduces in higher speed milling condition. And a new milling concept with ultra high speed over 100, 000 rpm is proposed for solving the various problems such as NC cutter path generation and NC feed conformity etc.

• 터널과지하공간
• /
• 제33권6호
• /
• pp.594-609
• /
• 2023

TBM 공법은 굴착면 안정성 확보 및 주변환경에 비치는 영향을 최소화하기 때문에 도심지나 하·해저터널 등에서 적용 사례가 증가하는 추세이다. 디스크 커터의 수명을 예측하는 대표적인 모델 중 NTNU모델은 커터수명지수(Cutter Life Index, CLI)를 주요 매개 변수로 활용하지만 복잡한 시험절차와 시험장비의 희귀성으로 측정에 어려움이 있다. 본 연구에서는 다중선형회귀분석과 트리 기반의 머신러닝 기법으로 암석물성을 활용하여 CLI를 예측하였다. 문헌 조사를 통해 암석의 일축압축강도, 압열인장강도, 등 가석영함량과 세르샤 마모지수 등을 포함한 데이터베이스를 구축하였고 파생변수를 계산하여 추가하였다. 다중선형회귀분석은 통계적 유의성과 다중공선성을 고려하여 입력 변수를 선정하였고 머신러닝 예측 모델은 변수 중요도를 기반으로 입력 변수를 선정하였다. 학습용과 검증용 데이터를 8:2로 나누어 모델 간 예측 성능을 비교한 결과 XGBoost가 최적의 모델로 선정되었다. 본 연구에서 도출된 다중선형회귀모델과 XGBoost모델을 선행 연구와 예측 성능을 비교하여 타당성을 확인하였다.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.19-27
• /
• 1995

Face milling is required to study cutting process with a view of multipoint cutter. This experimental study mainly deals with the single and multi-insert cutting characteristics using coated tool. Because metal cutting of the single and multi-insert has a large relation to the improvement of productivity, the economic cutting process can be achieved by the analysis of proper metal cutting mechanism. Therefore, machining characteristics of face molling in this paper has been studied by investigating the role of different insert number which is concerned with mean cutting force, the RMS values of AE(acoustic emission) signal, tool life and surface roughness in milling SS 41 and SUS 304. The cutting force and AE signal are monitored to make an analysis of cutting process. The surface roughness of the specimens machined by inserts of different numbers is measured at different speeds, feeds and depth of cut. The width of flank wear is also observed.

• Composites Research
• /
• 제13권1호
• /
• pp.78-88
• /
• 2000

하이브리드 복합재료는 구조용으로 개발되어 여러 분야에서 응용되고 있으며, 특히 항공산업, 우주산업, 스포츠레저산업, 자동차산업 등에서 그 응용 분야를 확대하고 있다. 섬유 보강 고분자 복합재료는 비강도, 비강성이 높으며, 물리 화학적 성질, 동적 특성, 트라이볼로지 특성 등이 우수하여 고부가가치를 가지는 부품이나 성형물을 생산할 수 있다. 이러한 하이브리드 복합재료는 치차, 베어링, 캠, 씨일 등의 마찰부품으로도 사용가능성이 매우 높으며, 하이브리드 복합재료의 구조를 적절히 설계함으로써 일정한 하중에 견디며, 마찰마모특성이 뛰어난 바이오미메틱 재료로서 사용될 수 있다. 복합재료의 마찰 및 마모 특성을 규명하기 위하여 마찰 및 마모시험기를 설계하여 제작한 후 일방향 섬유복합재료의 마찰 및 마모 성질을 측정하였다. 탄소섬유, 아라미드섬유, 유리섬유 등이 포함된 일방향 복합재료의 트라이볼로지 특성을 규명하여 이를 바탕으로 최소마모율이 예상되는 하이브리드 복합재료의 구조를 제안하기 위하여 유리섬유복합재료, 탄소섬유 복합재료, 아라미드섬유 복합재료의 마찰 및 마모특성을 측정하였다. 그 결과 섬유복합재료의 마찰 및 마모성질은 섬유의 배향과 활주속도 및 보강섬유의 종류에 따라 변화함을 알았다. 각 시편에 대한 실험결과를 분석하여, 탄소섬유와 아라미드섬유가 하이브리드화 된 복합재료의 구조를 제안하고 그 시편을 제작하여 실험하였고 결과를 분석하였다.