• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.257-264
• /
• 1995

We designed the cutter profile for symmetric screw rotor and did vibration experiment of screw rotor manufactured by the designed cutter profile. The results of this study are summarized as follows. (1) We designed the cutter profile of screw rotor (4-6)(5-6) by using numerical analysis program. (2) The maximum amplitude and variation of amplitude of 5-6 profile rotor are about 30 - 36.7% and 10 - 25% smaller than those of 4-6 profile rotor, respectively. (3) As the angular velocity of rotor changes from 100 to 300 rpm, the vibration of X, Y axis in driving shaft of 5-6 profile rotor is about 10 - 20% smaller than that of 4-6 profile rotor.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.79-84
• /
• 1996

Recently a symmetric and non-symmetric profile of screw rotor has been designed in the interior. Howere the processing method of screw rotor and the cutter design for screw rotor were not studied. Therefor we could not make the shape of the screw rotor designed by profile function with computer. In this study we have made cutter profile design program and manufactured cutters for screw rotors using H.S.S We machined screw rotors of symmetric 4x6 profile non-sysmmetric 4x6 profile with almighty milling machine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.907-912
• /
• 1994

Recently, a symmetric and non-symmetric profile of screw rotor has been designed in the interior. However the processing method of screw rotor and the cutter design for screw rotor were not studied. Therefore we could we could not make the shape of the screw rotor designed by profile function with computer. In this study, we have made cutter profile design program, and manufactured cutters for screw rotors using H.S.S. We have machined screw rotorts of symmetric 4*6 profile, non-symmetric 4*6 profile with almighty milling machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.109-118
• /
• 1997

The purpose of this paper is to design cutter profiles for manufacturing rotors of screw compressor, which are based on universal milling machine. The surface profile of screw rotor which is helicoidal is derived as brief equation through the coordinates transformation of the section perpendicular to rotor axis. And the equations of contact lines between a cutter and the surface profile of screw rotor are derived. The computer program which can analyze the equation of contact lines numerically and design the cutter profiles of screw rotor is made, and verified through measuring screw rotors which are menufactured as the designed cutter by the computer program.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.154-162
• /
• 1991

In this study, the simulation program is developed where the tooth profile error in internal gear shaping is calculated considering several factors which affect it. This factors are the circular feed of the pinion cutter, the interference by the geometric conditions of the cutter and the internal gear, the deviation from the theoretical involute profile of the cutter and the eccentricity of the cutter and the internal gear. With this program, the effects are investigated which the geometric conditions and the cutting conditions in internal gear shaping have on the tooth profile error of the internal gear. The condition for the minimization of it is derived and then the results of simulation are adequately verified by measurements of internal gears cut by a pinion cutter.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.19-25
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter interference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.141-147
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter inter- ference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.184-188
• /
• 2002

In 2D-Profile machining using cutter radius compensation cutter interferences are very common. To prevent the cutter interferences undercuts are inevitable in some regions of the profile. The undercut regions require cleanup machining using smaller radius tools. This paper considers a procedure of the tool path generation for the cleanup profile machining. And two methods are introduced for an efficient tool path generation. One is how to reduce the machining time by uniting adjacent tool paths of undercut regions, and the other is how to find the tool path with the minimal distance by applying TSP algorithm.

• Tribology and Lubricants
• /
• v.5 no.2
• /
• pp.107-112
• /
• 1989

This paper deals with strength analysis of tooth and method of manufacture of external tooth profile in harmonic drive. From the calculation of load imposed on the contact teeth, moximum contact stress is investigated to design the addendum modification coefficient. New tooth profile of the external gear is generated according to the law of gearing, assuming that internal gear has involute tooth profile. External tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$. The method to design cutter tooth profile is presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.45-52
• /
• 1997

In this study, we designed tooth profile of the fly-cutter for antisymmetric rotor which is used in screw compressor. In order to verify this profile, we manufactured three different pairs(J46, N46, P46) of antisymmetric rotor using fly-cutter. We got the following conclusions from this study. (1) We obtained better contact condition using 3pairs of rotor which are manufactured by the fly-cutter. (2) We could prevent the cutter interference near bottom point of the robe of screw rotor.