• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.379-382
• /
• 2000

The characteristics of Xe discharge lamp(Mercuryless lamp) are described in this paper. In this paper, FFL is operated by sine wave and pulsed source. We apply V-Q Lissajous' figure for the discharge measurements of FFL which has the electrodes covered with dielectric. When FFL is operated by sine wave source, the characteristics are similar to DBD(Dielectric Barrier Discharge) and SD(Silent Discharge). And we compared the characteristics of FFL which is operated with sine wave and pulsed discharge by using V-Q Lissajous' figure method. When FFL is operated with pulsed, the discharge current flows after the applied voltage is risen. As the duty ratio increases the electric field becomes strong and much more xenon ions are produced. And the number of metastable xenon atoms seem to increase, therefore, the phosphor radiation after the cut off of voltage increases compared with the first peak of radiation. Consequently, the 172㎚ radiation becomes strong as the duty ratio increases.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.63-70
• /
• 2019

An electro-aerodynamic lens for improving the performance of virtual impactor has been proposed in this study. ANSYS FLUENT Release 16.1 was used for numerical analysis of virtual impactor with and without the electro-aerodynamic lens, used to collimate the incoming aerosol particles into a particle beam before injecting the particles into the virtual impactor. Particles supplied to the electro-aerodynamic lens were assumed to be highly charged. By using an aerodynamic lens before the virtual impactor, without any electrostatic effect, it was found that the cut-off diameter of the virtual impactor was reduced from $4.2{\mu}m$ to $0.68{\mu}m$ and that the fine particle contamination problem became more serious. However, by employing the combined electrostatic and aerodynamic effects, that is, by applying electric voltage potential to the electro-aerodynamic lens, the cut-off diameter was found to be further reduced to $0.45{\mu}m$ and the fine particle contamination was eliminated.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.351-355
• /
• 2016

Welding machines are high-capacity systems used in a low-frequency range using IGBT. As their system is similar to a large transformer, most welding machines suffer a great loss because of hard switching and vast leakage inductance. A voltage-balancing circuit is designed to overcome these shortcomings. This circuit can reduce the transformer size by making it into a high frequency and reducing the input voltage by half and by adopting a serial structure that connects two full-bridges in a series to use a MOSFET with a good property at high frequency. In addition, a Schottky diode is used in the primary rectifier to overcome the low efficiency of most welding machines. To use the Schottky diode with a reliably relatively low withstanding voltage, an active snubber is adopted to effectively limit the ringing voltage of the diode cut-off voltage.

• 분석과학
• /
• 제15권1호
• /
• pp.7-14
• /
• 2002

본 연구에서는 레이저 애블레이션 이온 트랩 질량분석법을 이용하여 금속 및 세라믹 시료들에 대한 원소분석을 수행하였고, 이때 이온화 장치로는 XeCI 엑시머 레이저를 사용하였고 검출장치로서 이온트랩 질량 분석기를 사용하였다. 시료는 트랩의 바깥에 장착하여 시료의 교환이 매우 쉽도록 하였고 고체시료의 분석에 있어서 매우 효과적임을 밝혔다. 헬륨기체의 압력이나 이온저장시간, 초기질량제한 RF 전압 등에 대한 기초 실험을 통하여 실험의 최적 조건을 구하였고 (헬륨 기체압력 $1{\times}10^{-4}$ Torr 이온 저장시간 100 ms 초기 질량 제한전압 $1150V_{p-p}$), 이 결과를 토대로 금속시료(구리, 몰리브데늄)와 세라믹 시료(알루미나 세라믹, 지르코니아 세라믹) 들에 대한 원소분석을 수행하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.66-77
• /
• 2010

Improvement in breakdown voltage ($BV_{ds}$) and speed of the device are the key issues among the researchers for enhancing the performance of HEMT. Increased speed of the device aspires for shortened gate length ($L_g$), but due to lithographic limitation, shortening $L_g$ below sub-micrometer requires the inclusion of various metal-insulator geometries like T-gate onto the conventional architecture. It has been observed that the speed of the device can be enhanced by minimizing the effect of upper gate electrode on device characteristics, whereas increase in the $BV_{ds}$ of the device can be achieved by considering the finite effect of the upper gate electrode. Further, improvement in $BV_{ds}$ can be obtained by applying field plates, especially at the drain side. The important parameters affecting $BV_{ds}$ and cut-off frequency ($f_T$) of the device are the length, thickness, position and shape of metal-insulator geometry. In this context, intensive simulation work with analytical analysis has been carried out to study the effect of variation in length, thickness and position of the insulator under the gate for various metal-insulator gate geometries like T-gate, $\Gamma$-gate, Step-gate etc., to anticipate superior device performance in conventional HEMT structure.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.263-268
• /
• 2003

본 논문에서는 main gate(MG)와 side gate(SG)를 갖는 double gate(DG) MOSFET 구조를 조사하였다. MG가 50nm일 때 최적의 SG 전압은 약 3V임을 알 수 있었고, 각각의 MG에 대한 최적의 SG 길이는 약 70nm임을 알 수 있었다. DG MOSFET는 매우 작은 문턱 전압 roll-off 특성을 나타내고, 전류-전압 특성곡선에서 VMG=VDS=1.5V, VSG=3V인 곳에서 포화전류는 550$\mu\textrm{A}$/m임을 알 수 있었다. subthrehold slope는 82.6㎷/decade, 전달 컨덕턴스는 l14$\mu\textrm{A}$/$\mu\textrm{m}$ 그리고 DIBL은 43.37㎷이다 다중 입력 NAND 게이트 로직 응용에 대한 이 구조의 장점을 조사하였다. 이때, DG MOSFET에서 41.4GHz의 매우 높은 컷오프 주파수를 얻을 수 있었다.

• 전기화학회지
• /
• 제16권2호
• /
• pp.59-64
• /
• 2013

$Na_2CO_3$와 [M($SO_4$)(M = Ni, Co, Mn)]을 사용함으로써, Carbonate 공침 합성법에 의해 $[Ni_{0.6}Co_{0.2}Mn_{0.2}]CO_3$ 전구체를 합성하였다. 합성된 전구체는 공기분위기에서 $Li_2CO_3$와 혼합하여 각각, 750, 850 그리고 $950^{\circ}C$에서 소성되었고, 이로 인한 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ 양극활 물질의 소성온도가 미치는 영향을 조사하였다. $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$의 구조와 특성은 X-선 회절 분석(XRD), 시차주사현미경(SEM) 그리고 전기화학적 측정으로 분석되었는데, X-선 회절 결과 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$는 소성온도가 증가함에 따라서 $I_{(003)}/I_{(104)}$는 증가하고 R-factor 는 감소하였으며, 시차주사현미경 결과에서는 1차 입자의 크기가 증가하는 경향을 보였다. 특히, $950^{\circ}C$에서 24시간 동안 소성된 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$는 가역 용량이 $165.3mAhg^{-1}$[cut-off voltage 2.5~4.3 V, 0.1 C($17mAhg^{-1}$)] 그리고 50번째 충 방전 사이클 [cut-off voltage 2.5~4.3 V, 1 C($170mAhg^{-1}$)]까지 95.4%의 우수한 용량 보존율을 가지면서 가장 우수한 전기화학적 특성을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2102-2103
• /
• 2008

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device(RCD) of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms](KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this paper is proposed to a electrical fire disaster prevention device(EFDPD) for a RCD trip or a self circuit-breaking function on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• 한국방사선학회논문지
• /
• 제11권5호
• /
• pp.387-392
• /
• 2017

영 유아는 사건, 사고 및 교통사고 또는 질병으로 인해 머리에 골절 및 혈관파열, 피부에 상처를 받아 병원에 내원하여 영상의학과에서 머리 검사인 전 후(Skull AP) 및 측면(Skull LAT) 촬영을 받게 된다. 머리검사에서 성인 머리(Skull) 촬영은 격자를 이용하여 촬영에 적용하면 방사선 2차선을 제거하여 영상의 대조도를 높인다. 그러나 방사선 노출조건 중 관전압을 8~10 kVp 높게 주어야 하며 환자피폭이 증가한다. 본 연구는 영 유아 머리촬영시 격자(grid)를 이용하지 않고 동등한 영상을 얻을 수 있다면 피폭선량 감소 및 Grid Cut off에 의한 아티팩트를 방지할 수 있어 연구해 보았다. 연구자는 방사선계측기 이용 방사선선량을 측정 하고 의료영상평가 방법 중에서 주관적 평가(ROC,receiver operationg characteristic)을 해 보았다. 결과에서 격자를 이용하지 않고 촬영하면 환자 피폭선량 감소와 영상 평가에서도 영 유아의 머리 촬영시 격자를 이용하지 않고 촬영을 하게 되면 머리 전 후촬영에서 0.019 mGy 와 측면촬영 0.02 mGy 피폭선량 감소가 있었고 영상평가에서도 4점을 높게 받았다. 결론으로 병원에 내원한 영 유아 머리촬영은 격자를 이용하지 않고 촬영하면 피폭 선량 감소 및 영상 아티팩트인 Grid Cut off을 방지 할 수 있고 엑스선관 수명이 연장되리라 사료된다.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.377-385
• /
• 2021

High voltage direct current(HVDC) systems has been an alternative method of a power transmission to replace high voltage alternate current(HVAC), which is a traditional AC transmission method. Due to technical limitations, Line commutate converter HVDC(LCC-HVDC) was mainly used. However, result from many structural problems of LCC-HVDC, the voltage source converter HVDC(VSC-HVDC) are studied and applied recently. In this paper, after analyzing the reactive power and output voltage ripple, which are the main problems of LCC-HVDC, the characteristics of each HVDC are summarized. Based on this result, a new LCC-HVDC structure is proposed by combining LCC-HVDC with the MMC structure, which is a representative VSC-HVDC topology. The proposed structure generates lower reactive power than the conventional method, and greatly reduces the 12th harmonic, a major component of output voltage ripple. In addition, it can be easily applied to the already installed LCC-HVDC. When the proposed method is applied, the control of the reactive power compensator becomes unnecessary, and there is an advantage that the cut-off frequency of the output DC filter can be designed smaller. The validity of the proposed LCC-HVDC is verified through simulation and experiments.