• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.239-243
• /
• 2019

본 연구에서는 Anthraquinone-2,7-disulfonic acid (2,7-AQDS)와 Tiron을 수계 레독스 흐름 전지 음극 및 양극 활물질로 사용하며 기존의 황산 전해질 대신 중성인 염화암모늄 ($NH_4Cl$)을 전해질로 도입하였다. 이렇게 전해질을 변경함으로써, 황산 전해질의 낮은 셀 전압(0.76 V)을 1.01 V까지 향상시킬수 있다. 성능 최적화를 위해 염화암모늄 전해질에 0.1 M로 활물질 농도를 맞춰 컷-오프 전압에 변화를 주며 완전지셀 성능을 평가하였다. 0.2~1.6 V 구간의 컷-오프 전압으로 $40mA/cm^2$ 하에서 20 사이클 동안 완전지셀을 테스트한 결과, 충전 동안 수소가 발생하였다. 이에 컷-오프 전압 조절로 충전 전압을 낮춰서 수소 발생을 제한하고자 0.2~1.2 V 구간으로 $40mA/cm^2$ 하에서 완전지셀 테스트를 진행하였다. 수소 발생은 없었으며, 전류 효율 99%, 방전 용량 3.3 Ah/L의 성능을 보였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.1085-1091
• /
• 2018

Study Design: Case-control. Purpose: To determine optimal cut-off value for body mass index (BMI) in predicting surgical success in patients with lumbar spinal canal stenosis (LSCS). Overview of Literature: BMI is an essential variable in the assessment of patients with LSCS. Methods: We conducted a prospective study with obese and non-obese LSCS surgical patients and analyzed data on age, sex, duration of symptoms, walking distance, morphologic grade of stenosis, BMI, postoperative complications, and functional disability. Obesity was defined as BMI of ${\geq}30kg/m^2$. Patients completed the Oswestry Disability Index (ODI) questionnaire before surgery and 2 years after surgery. Surgical success was defined as ${\geq}30%$ improvement from the baseline ODI score. Receiver operating characteristic (ROC) analysis was used to estimate the optimal cut-off values of BMI to predict surgical success. In addition, correlation was assessed between BMI and stenosis grade based on morphology as defined by Schizas and colleague in total, 189 patients were eligible to enter the study. Results: Mean age of patients was $61.5{\pm}9.6years$. Mean follow-up was $36{\pm}12months$. Most patients (88.4%) were classified with grades C (severe stenosis) and D (extreme stenosis). Post-surgical success was 85.7% at the 2-year follow-up. A weak correlation was observed between morphologic grade of stenosis and BMI. Rates of postoperative complications were similar between patients who were obese and those who were non-obese. Both cohorts had similar degree of improvement in the ODI at the 2-year followup. However, patients who were non-obese presented significantly higher surgical success than those who were obese. In ROC curve analysis, a cut-off value of ${\leq}29.1kg/m^2$ for BMI in patients with LSCS was suggestive of surgical success, with 81.1% sensitivity and 82.2% specificity (area under the curve, 0.857; 95% confidence interval, 0.788-0.927). Conclusion: This study showed that the BMI can be considered a parameter for predicting surgical success in patients with LSCS and can be useful in clinical practice.

• 한국방사선학회논문지
• /
• 제16권3호
• /
• pp.309-317
• /
• 2022

본 연구는 코로나 펜데믹에 의한 사회적 거리두기는 신체활동 감소를 가져왔고 이로 인한 근육량 감소는 혈관질환의 위험도가 높아진다고 보고되고 있다. 이에 본 연구는 경동맥 내중막두께 측정을 통해 두께 증가에 따른 여러 변수들의 차이를 분석하였으며 사지근육량지수가 경동맥 내중막두께 위험도 예측을 위한 효과적 표지자로서의 유용성을 알아보고자 하였다. 2022년 1월부터 2022년 5월까지 부산지역 H병원 건강검진센터에 검진을 목적으로 방문하여 혈청학적 검사, 경동맥초음파, 체성분검사를 시행한 남자 121명, 여자 99명 총 220명을 연구대상으로 하였다. 성별에 따른 위험인자의 유의미한 차이는 카이제곱검정을 통해 분석하였다. 동맥경화를 예측할 수 있는 변수의 Cut-off value를 구하였으며 곡선하면적, 민감도, 특이도를 산출하여 정확도를 평가하였다. 그 결과 남자는 총콜레스테롤이 높을수록 여자는 사지근육량지수가 낮을수록 경동맥 내중막두께 위험도가 높게 나타났다. 경동맥 내중막두께 위험도를 예측할 수 있는 Cut-off value는 남성그룹에서 총콜레스테롤 199 mg/dL 이상, 여성그룹에서 사지근육량지수 5.9 kg/m² 이하로 산출되었다. 따라서 사지근육량지수는 쉽게 접근이 가능한 비침습적인 검사로 성인여성의 경우 혈관변화를 조기 예측하고 예방할 수 있는 표지자 역할이 가능할 것으로 기대된다.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.24.1-24.15
• /
• 2023

Background: The construction workers are vulnerable to fatigue due to high physical workload. This study aimed to investigate the relationship between overwork and heart rate in construction workers and propose a scheme to prevent overwork in advance. Methods: We measured the heart rates of construction workers at a construction site of a residential and commercial complex in Seoul from August to October 2021 and develop an index that monitors overwork in real-time. A total of 66 Korean workers participated in the study, wearing real-time heart rate monitoring equipment. The relative heart rate (RHR) was calculated using the minimum and maximum heart rates, and the maximum acceptable working time (MAWT) was estimated using RHR to calculate the workload. The overwork index (OI) was defined as the cumulative workload evaluated with the MAWT. An appropriate scenario line (PSL) was set as an index that can be compared to the OI to evaluate the degree of overwork in real-time. The excess overwork index (EOI) was evaluated in real-time during work performance using the difference between the OI and the PSL. The EOI value was used to perform receiver operating characteristic (ROC) curve analysis to find the optimal cut-off value for classification of overwork state. Results: Of the 60 participants analyzed, 28 (46.7%) were classified as the overwork group based on their RHR. ROC curve analysis showed that the EOI was a good predictor of overwork, with an area under the curve of 0.824. The optimal cut-off values ranged from 21.8% to 24.0% depending on the method used to determine the cut-off point. Conclusion: The EOI showed promising results as a predictive tool to assess overwork in real-time using heart rate monitoring and calculation through MAWT. Further research is needed to assess physical workload accurately and determine cut-off values across industries.

• 한국식품영양학회지
• /
• 제20권3호
• /
• pp.295-303
• /
• 2007

As a result of life-style changes, consumer's concerns of food have shifted from calories and nutrition to health and convenience. Fresh-cut products are one such new direction for fruit and vegetable consumption. In this study, the vitamin C, mineral, and pesticide contents of various fresh-cut products were analyzed. According to sensory evaluations, the key reason for a lower than expected overall acceptability of many fresh-cut products is that they are likely to have browning and can easily lose their freshness. Also, the sensory evaluation showed that shriveling, the degree of browning, softening around the cut edge, and off-flavors were the primary factors affecting the quality of fresh-cut products. As a nutritional factor of quality, vitamin C content was not practical with regard to fresh-cut lettuce because the level was very low. For product safety, residual pesticides were detected in the fresh-cut products, but the results showed that all items were under permitted levels and considered safe. In evaluation of the microbial levels of the fresh-cut market products, the levels of viable cells, mold, yeast, coliform bacteria, and enterobacteriaceae were not significantly different based on the summer and winter seasons. The levels of S. aureus and Listeria spp. in the products were higher during the summer season than the winter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.234-237
• /
• 2000

In this paper, a method to implement new Quasi-SOI LDMOSFET is introduced and the electrical characteristics of the device are studied. Key process steps of the device are explained briefly. By performing process and device simulations, electrical characteristics of the device are investigated, with emphasis on the optimization of the tilt angle of p$\^$0/ channel region. The electrical properties of the Quasi-SOI device are compared with those of bulk and SOI devices with the same process parameters. Simulated device characteristics are threshold voltage, off-state leakage current, subthreshold swing, DIBL, output resistance, lattice temperature, I$\_$D/-V$\_$Ds/, and cut-off frequency.

• 한국잠사곤충학회지
• /
• 제13권2호
• /
• pp.151-154
• /
• 1971

In the silkworm egg production, cutting of the cocoon's edge formed by silkworms forced to aid the emergence, and emergence is related to the amount of alkaloid liquid in the sucking stomach in certain varieties. In this study, there was no difference between cutting of portion and sex, and no significant between cutting of both sides and one side cocoons when comparing their emergence ratio. Expenditures and emergence ratio between both sides and one side cutting off must be studied in coming future.

• 한국잠사곤충학회지
• /
• 제9권
• /
• pp.7-13
• /
• 1969

다간식 정지에 있어서 그 기조의 벌채를 어떻게 하는 것이 뽕의 수량과 정(十)의 상관관계가 있는 총조장과 총조경 및 총조장$\times$총조경들을 증대시킬 수가 있는가를 알기 위하여 시험한 결과를 들면 다음과 같다. (1) 춘벌한 경우에는 전기조 5 cm 균일 벌채구와 태조 10 cm 세조 5 cm 벌채구가 이들이 가장 크다. (2) 하벌한 경우에는 1지간중 상위부분의 기조는 5cm 하잎의 것은 10cm. 벌채구와 태조 l0cm 세조 5cm 벌채구 및 전기조 5cm 균일 벌채구가 가장 크다. (3) 춘벌을 통해서 볼 때에 그 전지 기술이 단순한한 전기조 5cm 균일벌채구가 가장 유리할 것 같다.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.353-358
• /
• 2010

This research introduces a new and improved design for a pneumatic cylinder driven roll feeder wherein each of the principal rotating feeder parts is configured so as to have feeding accuracy and to be low manufacturing cost. The feed pitch accuracy of the proposed roll feeder was evaluated by measuring lengths of cut offs of the strip stock with a shear attached to an air press. The air press was designed, manufactured, and mounted on the same table of the proposed roll feeder such that the strip stock maintained horizontal plane until the strip stock entered into the shear. The proposed roll feeder and the air press were designed to be operated automatically by a PLC employed controller. The feed pitch accuracy of the proposed roll feeder was analyzed by setting the pitch as 10, 12.5, and 15mm. At each predetermined feed pitch, the proposed roll feeder was tested 300 times as one test set and replicated three times. The average lengths of the cut offs of the strip stock ranged from 9.98 to 10.13mm, from 12.42 to 12.57mm, and from 14.96 to 15.06mm at the predetermined 10, 12.5, and 15mm feed pitch, respectively, among the total of 900 samples of each feed pitch. Main cause of variation of the length of the cut off of the strip stock fed by the proposed roll feeder was considered to be fluctuation of the air press during recompressing period of the air compressor to pressurize the air in the air tank. The largest difference between the maximum and the minimum length of the cut off was appeared while the air compressor recompressing the air. The air compressor used for this study restricted the air delivered to the proposed roll feeder while it was still running. Thus, this air delivery restriction problem should be improved by stabilizing the air press while the proposed roll feeder is running.

• Journal of Advanced Marine Engineering and Technology
• /
• 제7권1호
• /
• pp.40-48
• /
• 1983

Nowadays electromagnetic contactors are used for power on-off in various electrical loads. If the severe arc are occurred when power off, the magnetic contactor can not long run because of damage of contactor. In this paper, Authors indicate a method of how to minimize the arc when power off, Authors contrived a electronic circuit which can adjust the demagnetizing point of electro magnetic contactor, and control the demagnetizing point, utilizing our circuit, so as to occur the extinguish of arc at near the AC current zero point which is indispensibly exists. From the results of study, Authors could get confirmations the AC circuit could cut off with occurrence of mininum arc, and that possibility of extensive utilization of our method to hightension circuit.