• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.57-62
• /
• 2008

The objective of this study was to investigate the effect of triazole compounds [hexaconazole ($50mg{\cdot}L^{-1}$), diniconazole ($50mg{\cdot}L^{-1}$), myclobutanil ($150mg{\cdot}L^{-1}$), difenoconazole ($50mg{\cdot}L^{-1}$), tebuconazole ($500mg{\cdot}L^{-1}$), and bitertanol ($50mg{\cdot}L^{-1}$)] on commercial quality improvement of cut flowers of Dendranthema grandiflorum 'Baegkwang' Plant height, cut flower length and internode length decreased by all triazole compounds. Plant height, cut flower length, internode length and flower neck length were shortened by treatment of $50mg{\cdot}L^{-1}$ diniconazole and $500mg{\cdot}L^{-1}$ tebuconazole. Flower neck was thickened by hexaconazole and myclobutanil. Flower diameter increased with myclobutanil and bitertanol, while it decreased with tebuconazole. Among physiological injury, open center increased with bitertanol treatment. Overall $50mg{\cdot}L^{-1}$ diniconazole and $500mg{\cdot}L^{-1}$ tebuconazole showed a possitive effect on length flower neck and increasing chlorophyll content, while decreasing plant height, cut flower length and diameter of flowers. Thus it is necessary to consider kind, concentration, and treatment times for effective control of cut flower quality.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.361-371
• /
• 2024

This study was conducted to develop models of the xylem volume utilization rate and merchantable log utility rate of the Japanese larch (Larix kaempferi [Lamb.] Carrière), a major commercial species in South Korea. To develop these models, models were fitted together for the xylem volume utilization rate and merchantable log utility rate to the total stem volume. Data on the logs bucked by cut-to-length usage in the forestry field were used for modeling, and the tree diameter at breast height (DBH) and small-end diameter of the last log were used as major predictor variables. Considering the difference in the bucking rate between all logs and solely long-length logs, the models for merchantable log utility rate were classified into two types: short- and long-length logs as well as only long-length logs. Consequently, the models were significantly developed, and the predicted values showed high accuracy within the range of observed values. The tables for bucking rate by cut-to-length log usage were finally provided by applying the models of the xylem volume utilization rate and merchantable log utility rate. Because the bucking rate for all logs and long-length logs can be easily calculated with the easy-to-use DBH and the required small-end diameter of the last log, the developed models are highly expected to be applicable for predicting the timber assortment using the cut-to-length log usage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.799-804
• /
• 1999

Particle collection characteristics of the MOUDI cascade impactor has been studied for coarse particles in the range of 2 to 20$mu extrm{m}$ in aerodynamic diameter. A vibrating orifice aerosol generator was empolyed to generate monodisperse test aerosols. The oleic acid and sodium chloride(NaCl) particles were used as test aerosols. Aluminum foil and Teflon filter were selected as impaction media. The sampling flow rate was changed from 25 to 35L/min. Particle collection efficiency for single stage was examined for liquid particles. The stage response was obtained experimentally for the cascade impactor composed of three stages and a backup filter. The results showed that most of particle collection efficiencies measured in this work are similar to the efficiency curves obtained by Marple et al.(1991). For particles less than cut-off size of the stage, the collection efficiencies of solid particles are similar to those of loquid particles. However, the collection efficiency of solid particles decreases with mereasing particle diameter for the particles greater than the actual cut-off size of the impactor. The particle collection efficiency increases with increasing sampling flow rate at the same particel size. However, the collection efficiency curves seem not to be greatly shifted with the flow rate. The stage responses obtained by direct measurements in this work are in good agreement with those derived from the collection efficiency curves for single stage.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.63-70
• /
• 2019

An electro-aerodynamic lens for improving the performance of virtual impactor has been proposed in this study. ANSYS FLUENT Release 16.1 was used for numerical analysis of virtual impactor with and without the electro-aerodynamic lens, used to collimate the incoming aerosol particles into a particle beam before injecting the particles into the virtual impactor. Particles supplied to the electro-aerodynamic lens were assumed to be highly charged. By using an aerodynamic lens before the virtual impactor, without any electrostatic effect, it was found that the cut-off diameter of the virtual impactor was reduced from $4.2{\mu}m$ to $0.68{\mu}m$ and that the fine particle contamination problem became more serious. However, by employing the combined electrostatic and aerodynamic effects, that is, by applying electric voltage potential to the electro-aerodynamic lens, the cut-off diameter was found to be further reduced to $0.45{\mu}m$ and the fine particle contamination was eliminated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.555-560
• /
• 2000

The modeling and the numerical analysis are done so as to develop the Computer Aided Design program for the design of flow control valve attached to the vane pump. The factors affecting the flow rate characteristics, are analyzed by the experiments and the numerical methods. It is shown that the main factor affecting to the first control flow is the diameter of small rod of the spool, the main factor affecting to the second control flow is the diameter of big rod of the spool, the main factors affecting to the cut off are the main spring constant, the initial displacement of main spring and small diameter of the spool, and the dropping slope characteristics of flow rate are decided by the chamfer of spool and the dynamic characteristics of the spool.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.95-103
• /
• 2015

This paper presents the effects of the tool shape on the geometrical characteristics of flat end-milled side walls. A tool shape is characterized by such parameters as helix angle, number of cutting edges, and diameter. The geometrical characteristics of the side walls are represented by the surface profiles in the feed and axial directions, which are orthogonal to each other. The geometrical defects in each direction are estimated based on the instantaneous apparent cutting areas, which are represented by the interference area between the tool and workpiece and that between the cutting edge and workpiece. It is confirmed that a geometrical defect in the feed direction is formed when the tool leaves the workpiece and the curvature of the tool path changes. Defects in the axial direction are also found in the side walls, except for the defect zone in the feed direction. An up-cut using an end-mill with a steeper helix angle, a greater number of cutting edges, and a smaller diameter are thus found to improve the geometrical accuracy of end-milled side walls.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.77-82
• /
• 2013

A cyclone separator has been widely used in various industrial processes for removing fine particulate matter because it is easy to fabricate, cost effective, and adaptable to extremely harsh conditions. However, owing to the complex flow field in cyclones, a complete understanding of the detailed mechanisms of particulate removal has not yet been gained. In this study, a theoretical analysis was performed for calculating the collection efficiency and cut-off size in cyclones by taking into account the effects of geometrical and flow parameters. The collection efficiency and cut-off size values predicted by the theoretical model showed good agreement with experimental measurements for particles with a diameter of $0.5-30{\mu}m$. It was also revealed that the surface friction, along with the flow and geometrical parameters, has a significant effect on the cyclone performance.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.591-594
• /
• 2009

A new gerbera variety "Red Line" was released by the National Institute of Horticultural & Herbal Science (NIHHS) in 2008. A cross was made between "Mirage" with orange and double and "Rose" with red and semi-double in 2005. After investigation of the characteristics for four years (from 2005 to 2008), it was selected specially for the use of cut flower. "Red Line" is a vigorous cultivar with red (RHS R44B), black center and semi-double. The average flower diameter is 12.7 cm, large flower. And inner ray floret and disc diameter are 8.10 cm and 2.80 cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height. We believe that "Red Line" has a great potential for expanding cultivated area of domestic gerbera cultivars and increasing farmers-income.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.316-319
• /
• 2009

A new gerbera cultivar 'Lovely Moon' was released by the National Institute of Horticultural & Herbal Science (NIHHS) in 2008. A cross was made between 'Sever Line' and 'Angel' with yellow and semi-double flower in 2005. After investigation of the characteristics for four years (from 2005 to 2008), it was selected specially for the use of cut flowers. 'Lovely Moon' is a vigorous cultivar with yellow (RHS Y13B), yellow green center and semi-double flower. The average flower diameter is 12.7 cm, a large flower. And inner ray floret and disc diameter are 6.10 cm and 2.80 cm, respectively. It produces a large number of flowers with continuous supply of flowers and has a long peduncle height. We believe that 'Lovely Moon' has a great potential for expanding cultivated area of domestic gerbera cultivars and increasing farm income.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.703-706
• /
• 2010

A new gerbera cultivar 'Sunny Lemon' was released by the National Institute of Horticultural and Herbal Science (NIHHS) in 2009. A cross was made between 'Pavlov' and 'Patrick' with pink and semi-double in 2006. After investigation of the characteristics for four years (from 2006 to 2009), it was selected for the use of cut flower. 'Sunny Lemon' is a vigorous cultivar with yellow flower color (RHS Y9C), brown center and semi-double. The average flower diameter is 11.0 cm. And inner ray floret and disc diameter are 7.63 cm and 2.59 cm, respectively. Days to first blooming are 84.5, approximately 2 weeks earlier than the standard cultivar. It produces a large yield with continuous supply of cut flowers and has adequate peduncle height. We believe that 'Sunny Lemon' has a great potential for expanding cultivated area of domestic gerbera cultivars and increasing farmers' income.