고농도 비소 오염토양에 대한 fold규모 연속 토양세척공정의 적용 가능성을 평가하기 위해 경상남도 D광산 광미 혼합토양에 대하여 적용하였다. 초기 비소오염 농도는 $321\pm32 mg/kg$ dry soil 이었으며 pilot규모 실험에서 도출된 기본 운전조건을 적용한 결과, 세척된 토양의 잔류 비소농도는 2.03 mg/kg dry soil로서 $99\%$의 높은 제거효율을 나타내었다. 경제성 및 효율성을 개선하기 위하여 세척제의 농도, cut-off size, 진탕비를 조절하며 운전한 결과, 토양세척 공정 운전시 원활한 운전관리와 처리단가 등을 고려한 최적의 운전조건은 1) 각 단계의 세척제 농도 0.2M HCl-1.0M HCl-1.0M NaOH, 2) cut-off size 0.15mm(sieve $\sharp$100), 3) 진탕비 1:3으로 처리한 결과 세척된 토양의 잔류 비소농도는 2.03mg/kg이었으며 세척유출수 처리에서는 형성된 Hoc의 과포화로 인한 침전방해가 발생하지 않는 pH 6이 (33 ppb) 최적의 처리조건으로 판단되었다. 최종 배출된 청정자갈 및 토양, 티ter cake에 대하여 TCLP법을 적용한 용출실험 결과, 각각 1.04, ND, 0.07 mg/L 모두 용출비소 농도기준(5 mg/L)을 만족하며, 탈수슬러지의 함수율$(48\%)$도 폐기물관리법의 슬러지 수분함량 기준$(85\%)$을 만족하여 매립처리가 가능함을 알 수 있었다. 따라서 본 연구의 field 규모 연속 토양세척공정은 고농도 비소 오염부지의 정화를 위한 기술로 적용 가능함을 확인할 수 있었다.
한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
/
pp.780-791
/
1996
A hybrid image processing system which automatically distinguished lean tissues in the image of a complex beef cut surface and generated the lean tissue contour has been developed. Because of the in homegeneous distribution and fuzzy pattern of fat and lean tissue on the beef cut, conventional image segmentation and contour generation algorithm suffer from a heavy computing requirement, algorithm complexity and poor robustness. The proposed system utilizes an artificial neural network enhance the robustness of processing. The system is composed of pre-network , network and post-network processing stages. At the pre-network stage, gray level images of beef cuts were segmented and resized to be adequate to the network input. Features such as fat and bone were enhanced and the enhanced input image was converted tot he grid pattern image, whose grid was formed as 4 X4 pixel size. at the network stage, the normalized gray value of each grid image was taken as the network input. Th pre-trained network generated the grid image output of the isolated lean tissue. A training scheme of the network and the separating performance were presented and analyzed. The developed hybrid system showed the feasibility of the human like robust object segmentation and contour generation for the complex , fuzzy and irregular image.
Five reinforced concrete rigid frame and masonry infilled wall and cut off type masonry infilled wall were tesed during vertical and cyclic loads simultaneously. Experimental programs were accomplished to improve and evaluate the structural performance of test specimens, such as the hysteretic behavior, the maximum horizontal strength, crack propagation, and ductility etc. Test variables are hoop reinforcement ratio, with or without masonry infilled wall, and masonry method. All the specimens were constructed in one-third scale size. Based on the test results, the following conclusions can be made. For masonry infilled wall(IFB-1), maximum horizontal capacity was increased by 1.45 time in comparision with that of rigid frame(FB-0). For cut off masonry infilled wall (IFBC-1~3), maximum horizontal capacity was increased by 1.73~1.98 time in comparision with that of rigid frame(FB-0). For cut off masonry infilled wall(IFBG-1~3), ductility was increased by 1.48~2.08 time in comparision with that of masonry infilled wall (IFB-1).
본 연구는 일조방해에 의한 광환경의 변화가 절화 장미의 생산성과 품질에 미치는 영향을 분석하기 위해 절화용 스탠다드 장미 'Monet' 품종에 인위적으로 차광 처리하여 일조를 방해하고 일조방해 시간에 따른 장미의 절화수량과 생육특성을 조사하였다. 일조방해 시간에 따른 절화 장미 'Monet'의 단위면적(3.3m2)당 절화수량은 무처리구에서 40본인 반면 4시간, 8시간, 12시간 처리구에서는 각각 32본, 29본, 25본으로 일조방해 시간이 증가함에 따라 절화수량이 감소되는 경향을 나타내었다. 절화 장미의 품질과 관련된 절화 특성의 경우에도 무처리구에 비해 12시간 처리구에서 화폭과 화고, 꽃잎의 길이와 폭 등 모든 특성에서 10~20% 정도 감소하였다. 또한 절화 장미의 상품성을 결정하는 화경장과 꽃대 굵기, 절화중 등의 생육특성도 일조방해 시간이 증가됨에 따라 감소하는 경향을 보였다. 이에 반해 개화소요일수는 24.3일에서 27.7일로 14.0% 증가하는 등 일조방해 시간이 증가됨에 따라 전반적인 생육은 위축되고 개화는 지연되는 특성을 나타내었다. 본 연구의 결과에서 일조방해 시간이 증가함에 따라 꽃의 크기가 감소하고 화경장 및 절화의 생체중 등이 감소한 것은 일조방해로 인해 일평균 광합성광량자속밀도(PPFD)가 감소하고 이에 따라 총광합성량이 감소하면서 장미의 생장과 발달에 필요한 양분을 충분히 공급받지 못했기 때문으로 판단된다.
This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.
본 연구에서는 나노패턴된 금속(Ag)-유전체(PDMS) 다층 기반의 쌍곡선 메타구조를 제안하고 영상 소자용 적외선 차단 필터의 성능에 대해 보고한다. 사각형 모양의 Ag 나노 패턴의 크기와 Ag 나노 패턴을 둘러싼 PDMS의 두께를 최적화함으로써, 제안된 IR 차단 필터가 0.70-1.01 ㎛ 파장 대역의 빛을 99% 차단하면서도 가시광 영역에서 94% 이상의 높은 투과율을 나타냄을 보였다. 차단 파장 대역은 쌍곡선 메타구조의 epsilon-near-zero 파장보다 긴 파장 영역에서 시작하여 Ag 나노 패턴에 의한 플라즈모닉 흡수가 강한 지점에서 끝나게 된다. 근적외선 차단 대역보다 긴 파장 영역에서는 수평으로 인접한 Ag 나노패턴들 사이의 플라즈모닉 커플링 효과로 다시 투과도가 증가됨을 알 수 있다. 이러한 메타구조체는 적외선 차단 필터의 성능을 향상시킬 수 있을 뿐만 아니라 공정 단순화를 통해 초박형 제조가 가능하여, 다양한 평면 광학 및 집적광학 부품들에 적용될 수 있다.
A very large shell-structure built in shipyards like ship hulls or offshore structures are joined by welding through full process. As the welding contains a high thermal cycle at a local area, the welded structures should be distorted unavoidably. Because a distorted ship block should be revised to the designed value before the next stage, the ability to predict and to control the weld distortion is an accuracy level of the yard itself. Despite the ship block size, several present thermal distortion methodologies can deal those sizes, but it is a different story to deal full ship size model. Even a fully constructed ship hull not remaining any welding can have an accuracy issue like outfitting installation problems. Any present thermal distortion methodology cannot accept this size for its recommended element size and the number. The ordinary welding breadth at erection stage is about 20~40 mm. It can hardly be a good choice to make finite element model of these sizes considering human effort and computational environment. The finite element model for structure analysis of a ship hull is prepared at front-end engineering design stage which is the first process of the project. The element size of the model is as fine as the longitudinal space, and it is not proper to obtain a weld distortion at the erection stage. In this study, a methodology is suggested that a weldment can be shrunk at original place instead of using structural finite element model. We cut the original shell elements at erection weld-line and put truss elements between the edges of cut elements for weld shrinkage. Additional truss elements are used to facsimile transverse weld shrinkage which cannot be from the weld-line truss element shrink. They attach to weld-line truss element like twigs from barks. The capacity of developed elements is verified through an accuracy check of erection process of a container vessel at the apt. hull. It can be a useful tool for verifying a centering accuracy after renew and for block-separating planning considering accuracy.
본 연구는 Cartesian 격자망을 기본으로 하여 복잡한 지형을 위한 격자를 간편하고 효율적으로 생성할 수 있는 기법인 분할격자체계를 제안하고자 한다. 분할격자기법은 전반적인 흐름영역의 격자는 균일한 크기의 Cartesian 격자로 표현하지만 수치모형의 정확성, 적용성 및 효율성을 증대시키기 위하여 흐름의 특성이 변하는 격자를 분할하여 처리하는 기법이다. 분할격자체계에 의한 격자망은 다양한 크기 및 형상을 지니게 되므로, 유한체적기법을 적용하여 복잡한 흐름영역을 위한 수치모형을 구성한다. HLLC Riemann 근사해법을 이용하여 지배방정식을 이산화하였으며, 수치해의 안정성을 기하기 위하여 TVD-WAF기법을 적용하였다. 분할격자체계를 이용한 수치모형을 검증하기 위하여 해석해가 존재하는 사각형수조의 자유진동흐름을 모의하였다. 해석해와 수치모의 결과를 비교하여 본 연구에서 제안된 기법이 균일격자 및 분할격자체계에서 자유수면변위 및 x-축 및 y-축 방향의 유속을 정확히 모의함을 확인하였다.
본 연구는 fine blanking 프레스로부터 기능면으로 사용되는 100% clean cut 전단면을 얻는 fine blanking 공정에서 die roll을 최소화하기 위한 목적으로 성형 해석 및 실험적 방법을 통해 die chamfer 형상에 따라 성형되는 제품의 die roll size 변화를 검토한 것이다. fine blanking 과정을 묘사하기 위하여 deform 2D를 이용하여 성형 해석을 수행하여 die roll size를 예측하였으며, 실제 die chamfer가 다른 die insert를 제작하여 fine blanking 실험을 실시하여 die chamfer 형상에 따른 die roll size에 대한 해석 data와 실험 data를 비교 분석하여 die roll 길이 방향 size의 경향을 파악할 수 있었다. 이 연구 결과는 fine blanking 판재 성형에서 die roll을 최소화하기 위한 die chamfer 설계에 유용하게 적용될 것으로 판단된다.
Burrs always come out with the machining of ducterial with small size. Though the size of burrs is small, burrs dominate deterioration of the accuracy of the micro grooves. So the burr generation model especially side burr generation model was investigated to predict the size of the burrs at the given cutting conditions. The side shear plane is introduced to build the burr generation model and the width of side shear plane nomalized with cutting depth is defined with the shear angle. From the theoretical observation, the width of side shear plane can vary up 40% of the cutting depth. To determine the size of burr and stiffness, single groovings were carried out and it was found that there exist a critical depth of cut that the size or stiffness of the burr vary.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.