• Title/Summary/Keyword: Cut Off

검색결과 2,192건 처리시간 0.026초

파장변화에 따른 단 모드 광섬유의 스펙트랄 로스 및 차단파장 측정 (Measurement of Spectral Loss and Cut-off Wavelength of Single Mode Opticla Fiber by Variable Wavelength)

  • 홍봉식;한병성;구경완
    • 대한전자공학회논문지
    • /
    • 제23권2호
    • /
    • pp.264-268
    • /
    • 1986
  • A thchnique has been studied for the measurement of the spectral loss and the cut-off wave length, at which the first high-order mode disappears. The near-field patterns of a fiber which is excited by a variable wavelength source are used for the measurement of cut-off wavelength. Because of the absorptive phenomenon of OH- molecular vibration, spectral loss of a single mode optical fiber sample is 5.6dB/km at 1380 nm wavelength and 1dB/km at 1240 nm wavelength. From the near field intensity patterns and the mode field diameter graph for the half power width, the cut-off wavelength of the fiber is measured to be 1120 nm.

  • PDF

곡류단절지에 입지한 마을의 경관특성;삼지마을을 사례로 (The Landscape Characteristics of Village Located in the Meander cut-off Area;The Case of Samji Village)

  • 임의제;최기수
    • 한국조경학회지
    • /
    • 제28권2호
    • /
    • pp.109-109
    • /
    • 2000
  • This study seeks what kind of factors influence to locate dwellings and to establish scenic spots in nature by a case study focused on a meandering stream. The study specially concentrates on the interrelationship between both residences and beautiful sceneries and a meander cut-off-area that reveals a special topographical characteristics, located at Samji village in Youngyang-eup, Youngyang-gun, Koungsangbuk-do. The meander cut-off area, developed at the middle or upper reaches of a river, often makes up specific landscapes such as precipitous cliffs, sheer cliffs and caves. And the area where is specially created by sudden change of flow due to erosion perceived by the cut surface to be the most beautiful scenic spot. These beautiful landscapes were used to be called as Dae, Dam or Gul and managed by Confucian scholars who enjoy refined taste and devote themselves to the study in nature. Moreover, the Ku-Hado-literary means the area of ex-flow-made the scholars' lving with a well prepared basis for agriculture where supplied a cornucopia of organic matters and water. The merit of agriculture made it possible that the scholars became economically independent, and the fact might be the essential point why the meander cut-off area took noticed. Actually, Cho-family has been in Smaji Village for generations, producing a large number of scholars and keeping the actual power of the region. The physical shape of the meander cut-off area, cozily surrounded by mountains, is considered as a good place for the dwelling due to the influence of traditional sight of view for location and P'ungsuchiri which is known as Feng Shui in China and geomancy in the western world. It is a fruit in it own way that we could find the ancestors' discernment and wisdom from this study, who have lived their lives adapting themselves to the given natural environment and also utilizing the nature wisely. But this is a current-argued study on the meander cut-off area. Follow-up studies have to be continued about the landscapes of the meander streams and the meander cut-off areas scattered all over the country except Samji Village and draw the characteristics from the comparative analysis.

신선편의식품 포장기술 (Packaging technology of fresh-cut produce)

  • 김지강
    • 식품과학과 산업
    • /
    • 제50권2호
    • /
    • pp.12-26
    • /
    • 2017
  • Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

수치해석을 이용한 대형원형강재 가물막이의 침투유량 분석 (Numerical Investigation on Seepage Discharge Inside a Cylindrical Cut-off Wall)

  • ;;김성렬
    • 한국지반공학회논문집
    • /
    • 제34권10호
    • /
    • pp.51-60
    • /
    • 2018
  • 최근 해상 작업을 위한 새로운 시공기술로서 대형원형강재 가물막이 공법이 제안되었다. 본 구조물은 원형 형상의 가물막이이기 때문에 가물막이의 형상에 따른 침투해석 연구가 필요하다. 그러므로, 본 연구에서는 흐름해석을 수행하여 원형 가물막이에 대하여 벽체 내부로의 침투 유량을 산정하였다. 흐름해석에 이용된 수치모델링은 2열의 널말뚝을 가진 가물막이에 대하여 제안된 이론해와 비교하여 검증하였다. 흐름조건의 경우 축대칭 흐름조건의 침투유량이 2차원 흐름조건의 침투유량과 비교하여 1.55배 크게 나타났으므로 2차원 축대칭 흐름조건을 적용하였다. 벽체 반경, 벽체의 지중 근입깊이 그리고 벽체 내외부의 수위차 등을 변화시키며 변수연구를 수행한 결과, 침투유량은 벽체의 근입깊이와 벽체 반경이 증가할수록 감소하는 것으로 나타났다. 최종적으로, 대형원형강재 가물막이의 침투유량을 산정할 수 있는 간이식을 제안하였다.

Assessment of Ki-67 for Predicting Effective Prognosis in Breast Cancer Subtypes

  • Park, Sangjung;Park, Sunyoung;Kim, Jungho;Ahn, Sungwoo;Park, Kwang Hwa;Lee, Hyeyoung
    • 대한의생명과학회지
    • /
    • 제24권1호
    • /
    • pp.9-14
    • /
    • 2018
  • Ki-67 has been widely performed and become an important biomarker in worldwide clinics, but the standard cut off value of Ki-67 index in breast cancer is still controversy. The objective study was to understand the Ki-67 in breast cancer subtypes and to investigate relative risk of breast cancer subtypes according to Ki-67 cut off value in Korean breast cancer. Immunohistochemical staining (IHC) for estrogen receptor (ER), progesterone receptor (PR), human epidermal growth factor receptor 2 (HER2), and Ki-67 index was examined from 123 breast cancer patients. Ki-67 index was significantly overexpressed in PR, ER, and HER2 hormone negative groups. Ki-67 index in Triple negative and HER2 subtypes was shown significantly higher than that in Luminal A and Luminal B subtype. Then, we compared the relative risk of each subtype according to 14% and 20% Ki-67 cut off value, which were applied in most clinics. Especially, 20% Ki-67 cut off value in HER2 and Triple negative subtypes was shown 8.41 fold and 2.83 fold higher relative risk than this in Luminal A subtype. Moreover, Ki-67 index in HER2 2+ or 3+ status showed significantly overexpressed than this in HER2 1+ status. At the 20% Ki-67 cut off value, HER2 1+ or 2+ status and 3+ status showed significant difference. Therefore, the 20% Ki-67 cut off value will be useful as a precise prognostic management and helpful for interpreting diverse outcomes of other subtypes in breast cancer patients.

심계 허약아 진단을 위한 절단값의 산정 ; K-CBCL 총문제행동점수를 기준으로 (Set the Cut Off Values for Diagnosing Heart Weak Children ; By Using K-CBCL Total Behavior Problems Score)

  • 정민정;임정화;황보민;윤영주;김기봉
    • 대한한방소아과학회지
    • /
    • 제24권3호
    • /
    • pp.58-67
    • /
    • 2010
  • Objectives: The objective of this study was to evaluate the correlations between the Weak Children Questionnaire result and K-CBCL score. Also, this study was designed to define the cut off values of Heart Weak Scores by using 'K-CBCL' which represents the total behavior problems scores 50T in order to detect Heart Weak in Children Methods: 271 elementary school students in Daejeon answered the questionnaire and the data was analyzed. Results: There were high correlations between Heart Weak Score and K-CBCL which in a total behavior problems scores. The cut off values of Heart Weak Score, K-CBCL, a total behavior problems scores 50T, were calculated by ROC curve analysis. To diagnose as a Heart Weak Children, the correspondent cut off values for Heart Weak Score were 11 in boys and 8 in girls. Conclusions: To diagnose as a Heart Weak in Children, the correspondent cut off values for Heart Weak Score were 11 in boys and 8 in girls.

유한요소법을 이용한 필렛용접 이음부의 잔류응력분포 (Residual Stress Distribution on the Fillet Weldment used by Finite Element Method)

  • 김현성;우상익;정경섭
    • 한국강구조학회 논문집
    • /
    • 제12권2호통권45호
    • /
    • pp.197-207
    • /
    • 2000
  • 본 연구는 유한요소법을 이용해서 시간이력 열전도해석과 열탄성해석을 통해 필렛용접 이음부에서의 잔류응력분포를 측정하였다. 필렛용접은 1패스 용접이며, 경계조건으로는 표면유속조건과 온도에 의존하는 재료의 특성치를 고려하여 잔류응력을 평가하였다. 여기서, 용접입열양을 변수로 하였다. 그리고, 열탄성해석에 의해 잔류응력 평가할 때 중요한 문제로 언급되고 있는 cut-off 온도 설정에 대해 조사하였다. 또한, 시험체에서 구멍뚫기 방법에 의해 잔류응력분포를 측정하여 유한요소법에 의한 잔류응력분포와 비교하였다. 그 결과, 용접부에서는 재료의 항복강도 수준에 해당하는 인장잔류응력이 측정되었으며, 유한요소해석에 의한 수치해석 결과는 구멍뚫기 방법에 의한 측정치 및 다른 연구자의 측정치와 비교적 일치하는 것으로 나타났다. 그리고, Cut-off 온도는 재료의 항복강도가 나타나는 온도로 설정하는 것이 효과적임을 알 수 있었다.

  • PDF

코발트와 니켈로 치환한 리튬이온 이차전지 Cathode, Li(${Mn_{1-\delta}}{M_{\delta}$)$_2$$O_4$${LiMn_2}{O_4}$의 Cut-off 전압 변화에 따른 충방전 특성 (Charge-discharge Properties by Cut-off Voltage Changes of Li(${Mn_{1-\delta}}{M_{\delta}$)$_2$$O_4$ and ${LiMn_2}{O_4}$in Li-ion Secondary Batteries)

  • 유광수;박재홍;이승원;조병원
    • 한국세라믹학회지
    • /
    • 제38권5호
    • /
    • pp.424-430
    • /
    • 2001
  • Cut-off 전압 변화에 따른 충방전 특성을 알아보기 위하여 Mn을 다른 전이 금속이 Co와 Ni로 소량 치환시킨 Li(M $n_{1-{\delta}}$ $n_{\delta}$)$_2$ $O_4$(M=Ni, Co, $\delta$=0, 0.05, 0.1, 0.2)를 고상 반응법으로 80$0^{\circ}C$에서 48시간 동안 유지하여 합성하였다. 충방전의 cut-off 전압은 2.5~4.4V, 3.0~4.5V, 3.5~4.5V, 3.5V~4.7V의 네 가지 전압범위고 하였다. 충방전 실험결과, Li(M $n_{1-{\delta}}$ $n_{\delta}$)$_2$ $O_4$의 용량은 각각 Co와 Ni의 $\delta$=0.1에서 최대를 보였다. Co 치환 조성 재료와 순물질 모두에서 최대의 용량을 보인 cut-off 전압대는 3.5~4.5V 이었는데 이때의 Li(M $n_{0.9}$ $Co_{0.1}$)$_2$ $O_4$와 LiM $n_2$ $O_4$의 초기 충전용량과 초기 방전용량은 각각 118, 119mAh/g과 114, 104mAh/g 이었다. 또한 모든 cut-off 전압대에서 Li(M $n_{0.9}$ $Co_{0.1}$)$_2$ $O_4$는 순수한 LiM $n_2$ $O_4$보다 더 높은 용량과 우수한 싸이클 성능을 보였으며 그 결과는 밀착형 전지구성에서도 일치하였다.하였다.

  • PDF

화물터미널 운영 특성에 따른 택배영업소 수주 마감시간 결정 (Determination of Cut-off Time for Express Service Centers According to Operational Characteristics of Consolidation Terminal)

  • 고창성;문덕희;고현정;이희정
    • 산업공학
    • /
    • 제16권spc호
    • /
    • pp.99-104
    • /
    • 2003
  • While demands for express service are rapidly increasing according to recent progress of electronic commerce, express service companies are struggling to take a larger delivery service market share through ongoing improvement in their service processes. Extension of cut-off time for express service centers can provide the express company with increase of total sales, but it may also cause to increase the possibility not to satisfy customer needs due to work delay in the consolidation terminal. Therefore, compromised decision for cut-off time of each service center should be made by taking operation characteristics of the consolidation terminal into account. This study suggests an approach for determining the cut-off time for express service centers according to operational characteristics of the consolidation terminal with the objective of maximizing expected incremental sales. The problem defined in this study can be represented as two successive models; one is an integer programing model in which the best cut-off time for each sales center are determined, and the other is a single machine scheduling model in which a working schedule in the consolidation terminal is obtained. A genetic algorithm is developed to solve the two models simultaneously. Finally, an example problem is carried out to verify applicability and performance of the algorithm with the data set collected from an express company.