• 한국식품과학회지
• /
• 제28권3호
• /
• pp.497-505
• /
• 1996

분급휠속도(CWS, sut-off wheel speed) 9,000 rpm에서 초미세분쇄한 탈지대두박 분말을 공기분급휠속도 (ACWS, air classifying wheel speed) 21,000 rpm에서 9,000 rpm까지 3,000 rpm 간격으로 단계적으로 공기분급한 결과 ACWS가 감소함에　따라 단백질과 회분은 증가하는 반면 탄수화물, 지방 및 식이섬유는 감소하였다. 아미노산 조성과 함량은 원료 대두와 비슷하였고, 주요 아미노산은 aspartic acid와 glutamic acid였다. 수율은 ACWS의 감소에 따라 증가하였고, 입자의 경우 $4.9{\mu}m$에서 $14.2{\mu}m$의 범위로 ACWS의 감소에 따라 증가 경향이있었으며, 모서리가 있는 타원형의 형태를 보였다. 보수력, 보유력 및 유화력은 낮은 ACWS에서 더 낮은 값이었고, 탈지대두박을 이용한 커어드는 사용한 응고제와 전지대두분의 대체 비율에 따라 다른 특성을 나타내었다. 또 초미세분쇄한 탈지대두박 분말을 케익에 첨가하였을 때 콩 특유의 비린냄새가 강하게 나타나지 않았으며, 10%까지는 대체 가능함을 알 수 있었다.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.378-383
• /
• 1996

감귤과피로부터 다양한 생리활성 효과와 기능적 특성을 갖는 식이섬유(dietary fibers, DF)를 생산하기 위한 회분식 다단계 한외여과 공정에서 최적 분리 조건은 막횡단압력 7.5 psi,막분리 온도 $35^{\circ}C$, 과피추출즙 pH 3.0으로 결정하였으며, MWCO 단계별 flux 측정에서는 YM10이 가장 높은 값을 나타내었으나 retentate 회수율과 DF 함량면에 있어서는 YM100 단계가 더 효율적인 것으로 나타났다. 각 단계별 총식이섬유 (total dietary fiber, TDF) 함량 비교 결과 본래 과피의 TDF 함량은 33.4%, 170 mesh retentate의 TDF 함량은 18.5%, YM100 retentate에서의 TDF 함량은 8.4%로 나타나 거의 대부분의 DF가 예비여과와 YM100단계에서 회수됨을 알 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.327-341
• /
• 2017

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.

• 멤브레인
• /
• 제7권3호
• /
• pp.131-135
• /
• 1997

신규 고분자형 계면활성제($\alpha$-allyl-$\omega$-methoxy polyoxyethylene and maleic anhydride block copolymer)를 사용하는 고분자형 마이셀 촉진 한외여과법을 제안하였다. 제거용질로서는 염료의 중간체이며 발암성 물질인 1-나프틸 아민을 사용하였다. 고분자형 마이셀의 촉진효과는 중공사형 폴리아크리로니트릴 막(분획 분자량 6,000, 표면적 0.017$m^2$)을 사용하여 조사하였다. 플럭스의 선형의존성은 0.6kg/${cm}^2$까지 유지되었고, 점차 압력증가에 따라 플럭스 증가율은 감소하였다. 고분자형 마이셀을 첨가하지 않은 상태에서의 제거율은 2mM의 용질에 대하여 0.19, 2 wt.%의 고분자를 첨가한 상태에서의 제거율은 0.96이었다 고분자형 마이셀 내부로의 가용화가 분리효율을 5배 촉진시킨 것을 확인하였다.

• Nutrition Research and Practice
• /
• 제13권3호
• /
• pp.205-213
• /
• 2019

BACKGROUND/OBJECTIVES: Myocardial infarction (MI) is caused by extensive myocardial damage attributed to the occlusion of coronary arteries. Our previous study in a rat model of ischemia/reperfusion (I/R) demonstrated that administration of arabinoxylan (AX), comprising arabinose and xylose, protects against myocardial injury. In this study, we undertook to investigate whether psyllium seed husk (PSH), a safe dietary fiber containing a high level of AX (> 50%), also imparts protection against myocardial injury in the same rat model. MATERIALS/METHODS: Rats were fed diets supplemented with PSH (1, 10, or 100 mg/kg/d) for 3 d. The rats were then subjected to 30 min ischemia through ligation of the left anterior descending coronary artery, followed by 3 h reperfusion through release of the ligation. The hearts were harvested and cut into four slices. To assess infarct size (IS), an index representing heart damage, the slices were stained with 2,3,5-triphenyltetrazolium chloride (TTC). To elucidate underlying mechanisms, Western blotting was performed for the slices. RESULTS: Supplementation with 10 or 100 mg/kg/d of PSH significantly reduces the IS. PSH supplementation (100 mg/kg/d) tends to reduce caspase-3 generation and increase BCL-2/BAX ratio. PSH supplementation also upregulates the expression of nuclear factor erythroid 2-related factor 2 (NRF2), and its target genes including antioxidant enzymes such as glutathione S-transferase mu 2 (GSTM2) and superoxide dismutase 2 (SOD2). PSH supplementation upregulates some sirtuins ($NAD^+$-dependent deacetylases) including SIRT5 (a mitochondrial sirtuin) and SIRT6 and SIRT7 (nuclear sirtuins). Finally, PSH supplementation upregulates the expression of protein kinase A (PKA), and increases phosphorylated cAMP response element-binding protein (CREB) (pCREB), a target protein of PKA. CONCLUSIONS: The results from this study indicate that PSH consumption reduces myocardial I/R injury in rats by inhibiting the apoptotic cascades through modulation of gene expression of several genes located upstream of apoptosis. Therefore, we believe that PSH can be developed as a functional food that would be beneficial in the prevention of MI.

• 복식문화연구
• /
• 제29권6호
• /
• pp.779-794
• /
• 2021

In this study, the sales status of female ball-jointed dolls and their parts were investi- gated and analyzed. Baseline data from 194 products and 54 brands on domestic and international Internet sites was gathered for the manufacture of ball-jointed dolls and the development of prototype costumes for them. The results are as follows. First, the sizes used for ball-jointed dolls are SD, USD, MSD, 13SD, and 70SD together with height. This study analyzed 39 sizes (15~70cm) by classifying them into numbered groups: 1 (15~22cm), 2 (23~33cm), 3 (35~51cm), 4 (53~62cm), and 5 (63~70cm). The price varied depending on the size; for example, 50cm dolls were approximately 45,000 won, while limited editions were sold at high prices, regardless of their size. They were classified into designs according to their body proportions and facial features as follows: 7- or 8-head-figure, 5-head figure, and 3-head figure, and were presented proportionally as images of women, adolescents, and infants. Second, the head was incised so that the top could be removed horizontally or the facial region vertically, allowing attachment of the eyeballs (which were either glass, resin, or acrylic) to the inside. More than 30 different colors were sold. Various wig styles were provided, including cut, short hair, and perm. These were made from human hair, heat-resistant fiber, and artificial hair. For the hands, there was a design expressing human hand gestures. For the feet, heels were in the form of wearing either high-heels or flat soles.

• 한국초지조사료학회지
• /
• 제43권3호
• /
• pp.129-137
• /
• 2023

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH₃-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

• 복식문화연구
• /
• 제3권2호
• /
• pp.241-260
• /
• 1995

The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.

• 한국초지조사료학회지
• /
• 제4권1호
• /
• pp.41-60
• /
• 1983

사료작물(飼料作物)의 생육시기(生育時期)가 사일리지 품질(品質)에 미치는 영향(影響)을 조사(調査)하기 위하여 시험작물(試驗作物)로 보리, 호밀, 밀, 귀리, 오차드그라스, 이탈리안라이그라스, 옥수수 및 오차드그라스와 이탈리안라이그라스의 혼합목초(混合牧草)를 사용(使用)하여 각(各) 작물(作物)의 생육시기별(生育時期別) 수량(收量), 조성분(粗成分), 사일리지품질(品質) 및 면양과 in vitro소화율(消化率)을 측정(測定)하였다. 사일리지제조(製造)는 소형 원통형콘크리트사일로를 이용(利用)하였다. 1. 건물수량(乾物收量)은 생육시기(生育時期)가 진행(進行)됨에 따라 증가(增加)하였으며, 보리는 출수기(出穗期), 유숙기(乳熟期) 및 호숙기(糊熟期)에 10a당 각각(各各) 404, 635 및 900kg였고, 호밀은 수잉기(穗孕期), 출수직전(出穗直前), 출수초(出穗初), 출수말(出穗末), 개화기(開花期), 개화말(開花末) 및 개화후(開花後)에 각각(各各) 279, 589, 708, 1,000, 1,265, 1,376 및 1,492kg였고, 이탈리리안라이그라스는 영양생장기(營養生長期) 수잉기(穗孕期), 출수기(出穗期), 개화기(開花期)에 각각(各各) 355, 613, 844 및 1,109kg였고, 오차드그라스와 이탈리안라이그라스 혼합목초(混合牧草)는 출수전,(出穗前) 출수기(出穗期), 개화기(開花期) 및 개화후기(開花後期)가 각각(各各) 477, 696, 891 및 1,027kg였고, 옥수수는 출수전(出穗前), 유숙초(乳熟初), 유숙기(乳熟期), 황숙기(黃熟期) 및 완숙기(完熟期)에 각각(各各) 458, 1,252, 1,534, 1,986 및 2,053kg였다. 2 건물함량(乾物含量)은 숙기(熟期)가 진행(進行)됨에 따라 증가(增加)하였으나 조단백질(粗蛋白質)은 감소(減少)하였고 NFE는 다른 작물(作物)은 감소(減少)하였으나 옥수수는 증가(增加)하였다. 조섬유함량은 생육시기(生育時期)가 진행(進行)됨에 따라 옥수수를 제외하고는 증가(增加)하였고 조회분(粗灰分)은 감소(減少)하였다. 호밀의 NDF, ADF의 함량(含量)도 생육시기(生育時期)가 진행(進行)됨에 따라 증가(增加)하였다. 3 호밀의 in vitro 건물소화율(乾物消化率)은 수잉기(穗孕期), 출수기전(出穗期前), 출수초(出穗初), 출수말(出穗末), 개화기(開花期), 개화말(開花末) 및 개화후(開花後)에 각각(各各) 53.6, 54.1, 50.7, 47.1, 44.9, 40.1 및 38.9%였고, 그 방정식은 Y=56.22-0,74X+$0.009X^2$(Y=건물소화율(乾物消化率), X=첫 예취후의 지연일자)였다. 3. 호밀의 in vitro 가소화건물수량(可消化乾物收量)은 생육(生育) 시기(時期)가 진행(進行)됨에 다라 증가(增加)하였으나 개화기(開花期)부터는 감소(減少)하였고 그 방정식은 Y=168.88+26.09X-$0.41X^2$(Y=가소화건물수량(可消化乾物收量, X=첫 예취후의 지연일자)였다. 5. 옥수수의 in vitro 건물소화율(乾物消化率)은 출수전(出穗前), 유숙초(乳熟初), 유숙기(乳熟期), 황숙기(黃熟期) 및 완숙기(完熟期)에 각각(各各) 89.2, 71.5, 69.8 및 69.9%였다. 6. 사일리지의 조단백질(粗蛋白質)과 조섬유의 소화율(消化率)은 생육시기(生育時期)가 진행(進行)됨에 따라 감소(減少)하였으나 보리와 옥수수의 NFE는 일반적으로 증가(增加)하였다. 7. 사일리지의 TDN함량(含量)(건물기준(乾物基準))은 생육시기(生育時期)가 진행(進行)됨에 따라 감소(減少)하였으나 보리와 옥수수는 차(差)가 없었으며 보리는 출수기(出穗期), 유숙기(乳熟期) 및 호숙기(糊熟期)에 각각(各各) 57.8, 57.1 및 57.9%였고, 호밀은 개화초(開花草), 개화후(開花後) 및 유숙기(乳熟期)에 각각(各各) 50.0. 47.2 및 43.7%였고, 이탈리안라이그라스는 출수전(出穗前), 출수초(出穗初) 및 출추수(出穗後)에 각각(各各) 67.9, 63.7 및 54.9%였고 오차드그라스는 출수후(出穗後), 개화후(開花後) 및 유숙기(乳熟期)에 각각(各各) 548, 52.9 및 46.1%였고, 옥수수는 유숙기(乳熟期), 황숙기(黃熟期) 및 완숙기(完熟期)에 59.5, 62.8 및 61.6%였다. 8. pH는 생육(生育)이 진행(進行)됨에 따라 약간씩 증가(增加)하였다. 9 유기산함량(有機酸含量)은 생육(生育)이 진행(進行)되어 건물함량(乾物含量)이 증가(增加)됨에 따라 감소(減少)하였다.

• 한국초지조사료학회지
• /
• 제6권2호
• /
• pp.78-83
• /
• 1986

본(本) 시험(試驗)은 고랭지(高冷地) Timothy 우점초지에서 목초(牧草)의 적정(適正) 예취회수(刈取回數)와 최종(最終) 예취시기(刈取時期)를 구명(究明)하고자 DM 생산량(生産量), 월동후(越冬後) 초기생육특성(初期生育特性), 다음해 1차수량(次收量) 조단백질(粗蛋白質) 및 조섬유(粗纖維) 생산량(生産量)을 조사(調査)하고 그들간(間)의 상관관계(相關關係)를 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 초기생육(初期生育)이 개시(開始)되는 시기(時期)는 예취회수(刈取回數)가 증가(增加)함에 따라 빨라지는 경향(傾向)이었으나 유의차(有意差)가 없었으며 최종예취일(最終刈取日)에 따른 영향은 일정하지 않았다. 2. 예취회수(刈取回數)가 증가(增加)함에 따라 건물생산량(乾物生産量)은 감소하였으나 최종예취일(最終刈取日)에 따른 차이(差異)는 없었다. 3. 월동후 1 차수량(次收量)은 예취회수(刈取回數)에 따라 현저히 감소하였으나 최종예취일(最終刈取日)에 따른 차이(差異)는 뚜렷하지 않았다. 4. 조단백질(粗蛋白質) 생산량(生産量)은 예취회수(刈取回數)가 증가(增加)할수록 많아졌으나 건물율(乾物率)은 낮아지는 경향이었고 조섬유(粗纖維) 생산량(生産量)은 일정하지 않았다. 5. 건물수량(乾物收量)과 건물율(乾物率)($\gamma=0.78$) 및 다음해 1차수량(次收量)($\gamma=0.82$)간(間)과 건물율(乾物率)과 다음해 1차수량(次收量)($\gamma=0.83$)간(間)에는 정(正)의 상관(相關)이 있었고(p<0.01), 조단백질(粗蛋白質) 생산량(生産量)과 건물율(乾物率)($\gamma=-0.67$) 및 다음해 1차수량(次收量)($\gamma=-0.68$)간(間)에는 부(負)의 상관(相關)이었다(p<0.01). 6. 이상(以上)의 결과(結果)를 종합(綜合)해 볼 때 건물생산(乾物生産)에 있어서는 년간(年間) 예취회수(刈取回數)는 3회(回)호 하고 최종예취일(最終刈取日)은 9월(月) 30일(日)로 하는 것이 적당(適當)하다고 생각되며 조단백질(粗蛋白質) 수량(收量)을 고려한다면 4회(回) 예취(刈取)에 최종예취일(最終刈取日)은 9월(月) 30일(日)로 하는 것이 좋다고 사료(思料)된다.