• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.191-199
• /
• 1993

This paper describes the results of a systematic study to determine the characteristics of particle generated from various types of asbestos containing material(ACM) and manmade fiber material(MMFM) during operations of cutting and grinding in laboratory and workplace. Tests were conducted with a specially designed glove box which allowed complete sampling of the generated asbestos fibers. Specificially, air measurements were made during ACM and MMFM installation in building. All personal air samples collected were identified by polarized light microscopy(PLM), X-ray diffraction(XRD) and scanning electron microscope with energy dispersive X-ray analysis(SEM/EDXA). Also, the samples were counted by phase contrast microscope(PCM) in order to compare the results with the permissible exposure standard for workplace. Results indicate that the characterisitcs of fibers found in the roofing sheet, the ceiling and the wall insulation boards were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of rock wool. The concentrations of airborne fibers from various building materials cut by a grinder for 5 minutes were in the ranges of 0.09 $\sim$ 1.71 fibers/cc(f/cc). The highest concentration(1.71f/cc) was found during grinding the wall insulation board which also contains rock wool. The airborne fiber concentrations generated by installing at workplace were ranged from 0.0009 to 0.029 f/cc. All asbestos fibers from the ceiling insulation board at workplace were less than 20$\mu$m in length and more than 20% of them had the average aspect ratio greater than 20. Therefore, for the purpose of decreasing asbestos and man-made fiber concentrations at the workplace, the ceiling and wall board should use strong binding material to increase the binding force with fiber. Also, the permissible exposure standard for workplace(2.0f/cc) in Korea should be constituted below the maximum avaiable concentration measured at glove box.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.53-76
• /
• 1991

The study was designed to analyse the reorganization of the rabbit TMJ meniscus which was anteriorly displaced by surgery. The author compared the anteriorly displaced groups with control group. After surgical opening of the left rabbit TMJ space, cut the posterior attachment of the meniscus, and pushed it under the undercut area of the condyle head. Experimental groups were sacrificed by 1, 2, 4, 8 weeks after surgery. The samples were analysed with light microscope under T-B stain and electron microscope. The results were as follows: 1) The rabbit TMJ meniscus consisted of thick anterior and posterior band running different way, and comparative thin intermediate band runining antero-posteriorly. 2) Round oval shape chondrocyte-like cells were imbeded between the collagen fiber bundles and composed of proteoglycan granules, that showed metachromasia with toluidine blue, around the cell matrix. 3) Type II collagen fiber bundles in experimental group occured degenerative changes in organic patterns at 8 weeks, but those of type I collagen fiber bundles sustained longer, 4) The typical fibrocartilage of the rabbit TMJ meniscus was changed into fibrotic mode in process of time and showed the degenerative changes, which contained hyperplasia, calcification, resorption and hyalinization in the connective tissue. 5) The hyperplastic change of the synovial membrane in 4 week group and transitional change from fibrocyte to chondrocyte in cell type in 8 week group were observed. 6) The diameters of collagen fibers were diminished with the degenerative changes, the shape of the fibers became wavier and more nonorganic in running pattern and fiber bundle spaces widened.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.3-13
• /
• 1983

Fiber mats were made at five density levels, using fibers from kraft pulp screening rejects, rice straw and a 50/50 mixture of the two. They were soaked in the sulfur compounds. Specimens cut from the composite panels were tested in flexure at time intervals for one year to study the effect of aging. Modulus of elasticity (MOE) and modulus of rupture (MOR) were determined. Under optimum conditions of fiber mat preparation and saturation with molten sulfur and modified sulfur, composites were produced which exhibited mechanical properties comparable to conventional fiberglass in some properties and superior to conventional wood-based composition boards, For example. the moduli of elasticity of the reinforced composites made from pulp screening rejects, with a density of 0.35 gm/$cm^3$, were greater than 1,000,000 psi as compared 800.000 psi for high-density hardboard (1.28 gm/$cm^3$). Modulus of rupture of the best reinforced composites was about 7,000 psi, comparable to 6,000 psi of high-density hardboard.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.166-175
• /
• 2009

An experimental study was carried out to estimate the flexural performance of steel fiberreinforced self-compacting concrete. Seven slabs with three different steel fiber-reinforced concretes were prepared to make beam specimens. After proper curing period, each slab was cut to five beams with a diamond saw. The beam specimen was tested with displacement control method to obtain load-deflection curve. As the results, the self-compacting concrete beam showed higher flexural strength, ductility and toughness index compared to the normal concrete beam. This means that steel fiber-reinforced self-compacting concrete can be used more widely in the field of architecture and civil engineering because of its self-compactability and good mechanical properties.

• Korean Journal of Organic Agriculture
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2007

This experiment was conducted to study the spring productivity and feeding value of hairy vetch varieties. We also measured DM yield and feeding value by analyze CP and CF that authors made possible to calculate TDN and RFV. The results can be summarized as follows; Dry matter yield were increased earlier autumn seeding date and later cut in spring. Differences of dry matter yield in earlier cut in spring was high in order of Ostsaat, Welta, Vv4712, Penn-02, Common and Minnie. Crude protein(CP) yield was increased when earlier autumn seeding date and later cut in spring. Total digestible nutrient(TDN) yield of hairy vetch varieties was decreased when later autumn seeding date, and was increased when later cut in spring. TDN yield was highest in Ostsaat and Welta varieties had highest dry matter yield. Acid detergent fiber(ADF) content was decreased when later autumn seeding date and was increased when later cut in spring. Neutral detergent fiber(NDF) content was decreased when later autumn seeding date. Average values for relative feed value(RFV) were 157% and 132% in both cut. It shows that a high feed value in all of hairy vetch varieties. Above all, the results presented that the optimal seeding date for cultivating hairy vetch in the central region of Korea is between the 10th to the 20th of September. Because Ostsaat and Welta had significantly high dry matter yield we expected Ostsaat and Welta have a higher wintering ability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.48-53
• /
• 1988

Pearl millet has been detected as a promising new forage crop of excellent quality and productivity since 1985. Its green fodder yields were 10.7 to 12.8 tons per hectare in average of 26 accessions in Suwon, 1985. The yield level was much higher than those of Italian and pro so millets and com. Com was better than Italian and proso millets, and proso millet was better than Italian millet for a green fodder crop. Suwon 1 pearl millet hybrid was the best of the 13 hybrids examined in Suwon, 1986 being 149 tons per hectare of three times cut green fodder yields. The pearl millet hybrid was higher in green fodder yield than com and sorghum/sudan grass hybrids. Leaf area index was 32.4 for the three times cut pearl millet, while 5.8 for the one time cut corn, and 20.8 for the three times cut sorghum/sudan grass. Crude protein content was 16.3 percent for pearl millet being six to five percent higher than corn and sorghum/sudan grass, 11.8 percent for the one time cut at maturity and 16.1 percent for four times cut being higher than corn and sorghum/sudan grass. Crude fat content was 3. percent for pear 1 millet grain being some what higher than corn and sorghum/sudan grass and 1.3-1.4 percent for green fodder crop. Crude fiber content in grain was 1.9 percent for pearl millet 2.6 percent for corn, and 4.3 percent for sorghum/sudan grass. Crude fiber content in pearl millet plant was 24.4 to 26.8 percent, Crude ash content was 2.4 percent in grain and 10.8 to 11.6 percent in the plants of pearl millet hybrid. In vitro digestibility of grain was 93.7 percent for pearl millet, 95.4 percent for corn, and 55.8 percent for sorghum/sudan grass. The digestibility of whole plant was 57.6 to 63.4 percent for pearl millet, 46.3 percent for corn, and 47.3 to 57.6 percent for sorghum/sudan grass. Heavier nitrogen fertilizer applications increased green fodder yields, protein content and digestibility, but reduced fat and ash content of pearl millet inbred line T 186.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.347-352
• /
• 1996

The enzyme deactivation in a membrane recycling system for the simultaneous saccharification and fermentation(SSF) was studied under various temperature and pressure. The optimum molecular weight cut off(MWCO) of the ultrafiltration membrane for recycling cellulase and ${\beta}$-glucosidase was 50,000. When the cellulase was recycled continuously through the membrane system, it was not deactivated. But the activity of ${\beta}$-glucosidase was decreased with an increase in operating temperature and transmembrane pressure. After 720 minutes at $42^{\circ}C$ and 24.8 psig , the activity of ${\beta}$-glucosidase was reduced by 35% of the initial activity. Such tendencies could be well explained by the results of highly induced shear at the fiber surface of membrane when temperature and transmembrane pressure became higher.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.39-46
• /
• 2009

A recent and promising method for shear strengthening of reinforced concrete(RC) members is the use of near surface mounted(NSM) fiber reinforced polymer(FRP) reinforcement. In the NSM method, the reinforcement is embedded in grooves cut onto the surface of the member to be strengthened and filled with an appropriate binding agent such as epoxy paste or cement grout. This paper illustrates a research program on shear strengthening of RC beams with NSM channel-type FRP beams which is developed in this study. The objective of this study is to clarify the role of channel-type FRP beam embedded to the beam web for shear strengthening of reinforced concrete beams. Included in the study are effectiveness in terms of spacing and angle of channel-type FRP beams, strengthening method, and shear span ratio. the study also aims to understand the additional shear capacity due to glass fiber reinforced polymer beams and carbon reinforced polymer beams. And anther objective is to study the failure modes, shear strengthening effect on ultimate force and load deflection behavior of RC beams embedded with channel-type FRP beams on the shear region of the beams.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.