• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1349-1353
• /
• 2003

Previous researches for fiber reinforced composite material(FRCM) have been evaluated the fatigue delamination behavior using the traditional fracture mechanics parameters. Therefore. previous researches for FRCM have not generally been firmed yet. Because delamination growth behavior in FRCM should be consider relationship between delamination area, A$\sub$D/ and crack length, a instead of traditional fracture mechanics parameters. Especially, in case of delamination behavior for FRCM without crack should be considering equivalent crack, i.e., pseudo crack, a$\sub$p/, using the fracture behavior of FRCM with crack. The major purpose of this study was to evaluate the delamination for FRCM without crack. The details of the studies are as follow : 1) Relationship between crack growth rate, da/dN and stress intensity factor, ΔK in FRCM containing a saw-cut and circular hole with crack. 2) Propose of PSEUDO CRACK MODEL for the delamination in FRCM without crack. 3) Analysis of crack propagation energy, E$\sub$crack/ using a total energy, E$\sub$total/ and delamination growth energy, E$\sub$del/.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.43-49
• /
• 2006

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value, hard-to-remove water content, freezing and non-freezing bound water content, polymer adsorption, and crystallinity index. For a high-dosage enzyme treatment (0.10 g/g), the fiber length was significantly decreased and the fibers were 'cut' in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high-dosage treatment. Three independent measurements (non-freezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. Based on the experimental results obtained herein, a model was proposed to explain surface and pore structure modification of cellulose fibers via enzymatic treatment.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Composites Research
• /
• 제28권5호
• /
• pp.291-296
• /
• 2015

본 연구에서는 자동차 구조물의 경량화를 위해 자연섬유 복합재료를 적용하여 차량용 패널의 구조 설계 및 해석을 수행하였다. 구조 설계를 위해 Flax/vinyl ester 복합재료를 적용하였다. 섬유 복합재 패널의 제조공법은 VARTML(Vacuum Assisted Resin Transfer Molding-Light) 제조공법이 적용되었다. 구조 설계 후 충돌에 의한 구조물의 안전성을 분석하기 위해 충돌 실험을 수행하였다. 충돌 실험은 유럽 보행자 보호 기준에 맞게 수행하였으며 해석 결과를 검증하기 위하여 시편을 제작해 충격 실험을 수행하였다. 또한 충격 손상 후 구조물의 잔류강도를 측정하기 위해 손상을 가한 시편의 압축강도 실험을 수행하였다.

• Composites Research
• /
• 제28권2호
• /
• pp.46-51
• /
• 2015

본 연구에서는 차량용 본넷의 구조 설계 및 해석을 수행하였다. 구조 설계를 위해 아마/비닐 에스테르 복합재료가 적용되었다. 아마 섬유 복합재 본넷의 제조공법은 VARTML(Vacuum Assisted Resin Transfer Molding-Light) 제조공법이 적용하였다. VARTML 공법은 한쪽 면은 견고한 금형을 사용하고 다른 면은 진공과 함께 유연한 금형을 사용하여 압력차를 이용하여 내부에 적층된 섬유에 수지를 신속하게 함침 시켜 성형하는 방법이다. 아마/비닐 에스테르 패널로 부터 시편을 가공하여 재료의 기계적 물성치를 획득하기 위한 시편 시험을 수행하였다. 이를 기반으로 자동차 본넷의 구조 설계를 수행하였다.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.102-108
• /
• 2012

A study of terahertz waves (T-ray) was made for the nondestructive evaluation of FRP (Fiber reinforced plastics) composite materials. The to-be-used systems were time domain spectroscopy (TDS) and continuous wave (CW). The composite materials investigated include both turbine blades of wind energy (non-conducting polymeric composites) and conducting carbon fiber composites. Terahertz signals in the TDS mode resembles that of ultrasound; however, unlike ultrasound, a terahertz pulse was not able to detect a material with conductivity. This was demonstrated in CFRP (Carbon fiber reinforced plastics) laminates. Refractive index (n) was defined as one of mechanical properties; so a method was solved in order solve the "n" in the material with the cut parts of the turbine blades of wind energy. The defects and anomalies investigated by terahertz radiation were foreign material inclusions and simulated disband. Especially, it is found that the T-ray went through the turbine blade with greater thickness (about 90mm).

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.141-146
• /
• 2021

We have evaluated the suppression effect of atmospheric-turbulence-induced optical scintillation in terrestrial free-space optical (FSO) communication systems using a gain-saturated erbium-doped fiber amplifier (EDFA). The variation of EDFA output signal power has been measured with different amounts of gain saturation and modulation indices of the optical input signal. From the measured results, we have found that the peak-to-peak power variation was decreased drastically below 2 kHz of modulation frequency, in both 3-dB and 6-dB gain compression cases. Then, the power spectral density (PSD) of optical scintillation has been calculated with Butterworth-type transfer function. In the calculation, different levels of atmospheric-turbulence-induced optical scintillation have been taken into account with different values of the Butterworth cut-off frequency. Finally, the suppression effect of optical scintillation has been estimated with the measured frequency response of the EDFA and the calculated PSD of the optical scintillation. From our estimated results, the atmospheric-turbulence-induced optical scintillation could be suppressed efficiently, as long as the EDFA were operated in a deeply gain-saturated region.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.109-116
• /
• 2008

탄소섬유시트의 부착성능을 조사하는 방법으로써 중앙을 절단한 보 공시체를 이용한 휨 거동 형식의 시험기를 개발하여, 콘크리트의 압축강도를 변수로 정적 재하 실험을 실시하였다. 탄소섬유시트의 파단의 결과를 이용하여 이 시험기의 검증과 함께 전단부착강도의 산출식을 도출하려고 노력 하였다. 그 결과, 첫 번째로 새로운 형식의 시험기에 의한 부착강도시험의 타당성이 증명되었다. 두 번째는 CFS 표면 변형률의 결과로부터 구해진 전단부착강도는 2종류의 경향이 있음이 발견되었다. 그 데이터 중에서 비교적 안정성이 높은 전단부착강도의 평균치는 3.41MPa, 하한치는 2.11MPa이었다. 이번 실험에서는 콘크리트의 강도가 전단부착강도에 미치는 특별한 영향을 볼 수 없었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권2호
• /
• pp.102-106
• /
• 2007

선박 제조에 사용되고 있는 FRP(Fiber-reinforced plastic)를 재활용하기 위한 노력이 지속되고 있는 가운데 보다 친환경적이며 가치를 재창출할 수 있는 방법들이 연구되고 있다. 본 연구진들은 선박용 FRP에 쓰이는 유리섬유의 구조가 그 짜임새의 형태에 따라 로빙층과 매트층으로 구분된다는 사실에 착안하여 FRP를 분쇄하지 않고 층을 분리할 수 있었다. 그 중 로빙층을 적절한 크기로 잘라 장섬유(약 50 mm, 이후 'F섬유')를 만들었다. F섬유의 인장강도 증가와 화학적 내식성 증가는 잔재하는 수지(전체 섬유의 무게비 25% 정도)의 영향인 것으로 보인다. 본 연구에서는 F 섬유의 재활용의 한 방법으로 섬유강화 모르타르를 제조한 결과 2%(v/v)의 F섬유를 포함한 모르타르는 28일 양생 후 휨 강도가 34.6% 증가함을 보였다. 수입 합성섬유 P-54를 사용한 모르타르와 유사한 정도의 휨 강도를 얻을 수 있었다. 이는 F섬유가 골재로 사용이 가능하며 수입품을 대체할 수 있음을 의미한다.

• 한국초지조사료학회지
• /
• 제16권4호
• /
• pp.315-326
• /
• 1996

An experiment was carried out to determine effect of cultivar, drying agent concentration and preservative on the moisture content, temperature and quality changes of fall harvested oat(Avena sativa L.) hay during field curing and storage. The main plots consisted of the cultivar such as 'Foothill' and 'Swan', the subplots consisted of drying agent concentration such as 7Skg/ha(C1), lOSkglha(C2) and control(C0) and the sub-subplots consisted of preservative such as buffered acid(BA), lactic bacteria inoculant(LB) and control(C0). Moisture contents of 'Foothill' and 'Swan' oat cultivar at harvest were 635.5 and 385.4%DW(Dry weight), respectively, but the final moisture contents of the oat cultivars were 117 and 86%DW. The moisture content of cut oat was not affeded by drying agent concentration. Core temperature of baled 'Swan' oat hay was a little higher than that of 'Foothill' and no consistent preservative effect was found. Total nitrogen content of 'Swan' oat hay was 3.08% and that of 'Foothill' oat hay was 3.45%(P<0.05). Drying agent treatment increased total nitrogen content of 'Swan'(P <0.05), but preservative had no effect. Crude fiber content of oat cultivar was increased as the curing progressed(P<0.05) and the difference of crude fiber content of oat cultivar was maintained through the whole curing period. Effect of drying agent concentration on crude fiber content was not found after preservation. Crude fiber content of 'Swan' oat hay was higher than that of 'Foothill' by 1.O% in ADF and 3.1 % in NDF(P<0.05). No preservative effect was found in crude fiber content. According to RFV of oat cultivar at harvest, forage quality of 'Foothill' and 'Swan' was Prime and Grade 1, respectively, but that of both cultivm was above Grade 2 at the final curing day. RFV of the stored 'Foothill' and 'Swan' oat hay was 122 and 114(P<0.05), respectively, and the quality of oat hay was classified as Grade 1 and 2, respectively, according to the forage quality standard assigned by AFGC.