• 대한토목학회논문집
• /
• 제34권6호
• /
• pp.1731-1741
• /
• 2014

교통수요의 증가에 따른 교통혼잡을 피하기 위하여 고가도로와 고속도로, 경전철 등이 활발히 건설되고 있으며, 이에 따라 접속부 등과 같은 곡률반경이 작은 곡선교 구간의 발생이 증가하고 있다. 초기에는 직선형의 주형을 연결하여 곡선을 이루는 방법을 사용하였으나, 공사비의 증가와 미관성 측면에서 용이하지 않아 강재를 사용한 곡선주형이 개발되어 적용되고 있다. 강재의 특성상 기하학적인 형상을 구현하는데 상대적으로 손쉽기 때문에 대부분의 곡선교에서는 강재를 이용한 강박스 거더교를 주로 사용하고 있다. 그러나 강박스 거더교는 초기 공사비가 고가이고, 도장과 같은 지속적인 유지관리가 필요한 문제점을 가지고 있다. 최근에는 I형 강재 플레이트 거더를 사용하는 방법이 활발히 연구되고 있으나 곡선 I형상의 특성상 개단면이고 얇은 플레이트를 사용하기 때문에 비틀림 강성이 매우 작아 안전성에 문제가 있는 것으로 지적되고 있다. 이러한 곡선강교의 대안으로 경제성과 안전성이 확보되는 프리캐스트 PSC 곡선거더가 제시되고 있다. 이에 본 연구에서는 프리캐스트 PSC 곡선거더를 효율적으로 제작할 수 있는 스마트 몰드 시스템을 개발하고 이를 적용한 2주형 40m 실물교량의 정적 휨 파괴 실험을 통하여 안전성을 확인하고자 한다. 제작단계에서 단일 거더는 곡률반경에 의해 거더의 전도에 대한 안정성이 문제가 있으나 가로보로 연결된 멀티거더는 하중분배가 적절히 이루어지며 안정성이 확보되는 것으로 나타났다. 정적구조 실험결과에서는 균열하중(1,400 kN)이 설계하중(450 kN)의 약 3배 이상 높은 것으로 나타났으며, 허용처짐량에 해당하는 하중은 설계하중의 4배인 1,800 kN에서 발생하여 사용성과 안전성이 모두 확보되는 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.527-535
• /
• 2015

As a new technical approach, a hydraulic and magnetic clamp device was attempted to realize a magnetic clamp crane system that uses 8 simultaneously actuating individual hydraulic cylinders. Through this approach, a Sr type of ferritic permanent magnet ($SrO{\cdot}6Fe_2O_3$), not the previously employed electro-magnet, was utilized for the purpose of lifting and transporting the heavy weighted and oversized curved steel plates used for manufacturing the ships. This study is aimed at manufacturing and developing the hydraulic magnetic clamp prototype, which is composed of three main parts - the base frame, cylinder joint, and magnet joint - in order to safely transport such curved steel plates. Furthermore, this research was pursued to conduct a performance evaluation as to the prototype manufacture and acquire the planned quantity value and the development purpose items. The most significant item for a performance evaluation was estimated for the magnetic adhesive force (G) and in this process, a ferritic permanent magnet (Sr type) with 3700~4000 G of residual induction (Br) and 2640/2770 Oe of coercive force (Hc) was utilized. In addition, other relevant items such as hoist tension (kN), transportation time (sec), and the applied load (Kgf) exerted on the hydraulic cylinders were also evaluated in order to acquire the optimum quantity value. As a result of the evaluation, the relevant device turned out to be suitable for safely transporting the curved steel plates.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.735-742
• /
• 2006

실 설계에서 적용되는 강곡선 플레이트거더교의 기하학적인 설계범위 내에서 횡방향변형이 충분히 지지된 강곡선 플레이트거더 복부판의 극한전단강도는 비록 직선복부판에 비해 후좌굴강도는 감소할지라도 탄성좌굴강도가 상대적으로 증가한다. 또한 강곡선 플레이트거더 복부판의 극한전단강도는 후좌굴강도를 포함한 직선플레이트거더 복부판의 극한전단강도와 같은 크기를 발현하고 있음이 여러 연구를 통해서 입증되었다. 본 연구에서는 강곡선 플레이트거더 복부판이 극한전단강도를 발현하기 위한 중간수직보강재의 소요강성에 관한 수치해석연구를 수행하였다. 수치해석결과로부터 후좌굴거동이 존재하는 강곡 선플레이트거더 복부판이 후좌굴강도를 충분히 발현하기 위해서는 현행 Guide Specifications(AASHTO, 2003)의 중간수직보강재 강성이 후좌굴거동 시에 단순지지역할을 하기에는 부족한 것으로 조사되었으며, 이를 기초로 전단좌굴강도비에 따른 소요강성식을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.17-38
• /
• 2018

In this paper, we compare and assess the performance of the standard 3- and 6-node MITC shell elements (Lee and Bathe 2004) with the recently developed MITC triangular elements (Lee et al. 2014, Jeon et al. 2014, Jun et al. 2018) which were based on the partitions of unity approximation, bubble node, or both. The convergence behavior of the shell elements are measured in well-known benchmark tests; four plane stress tests (mesh distortion test, cantilever beam, Cook's skew beam, and MacNeal beam), two plate tests (Morley's skew plate and circular plate), and six shell tests (curved beam, twisted beam, pinched cylinder, hemispherical shells with or without hole, and Scordelis-Lo roof). To precisely compare and evaluate the solution accuracy of the shell elements, different triangular mesh patterns and distorted element mesh are adopted in the benchmark problems. All shell finite elements considered pass the basic tests; namely, the isotropy, the patch, and the zero energy mode tests.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.43-59
• /
• 2020

In this study, free vibration analysis of laminated composite parabolic thick plate frames by using finite element method is introduced. Governing equations of an eigenvalue problem are obtained from First Order Shear Deformation Theory (FSDT). Finite element method is employed to obtain natural frequency values from the governing differential equations. The frames consist of two flat square plates and one singly curved plate. Parameters like radii of curvature, aspect ratio, ply orientation and boundary conditions are investigated to understand their effect on dynamic behavior of such a structure. In addition, multi-bay structures of such geometry with different stacking order are also taken into account. The composite frame structures are also modeled and simulated via ANSYS to verify the accuracy of the present study.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.21-29
• /
• 2013

For the purpose of supporting Curved Blocks, pipe welding is commonly used on Curved panel. Typically, when it comes to attaching supporting pipe on heavy incurvated surface, it makes much loss in the process of design, cutting, welding. This paper gives proper methods to collecting problems and Core conflicts surrounding Support Pipe by using of TOC (Theory Of Constraints). Therefore drawing two solutions, pipe development program and NC generating from pipe development Data for Plate Cutting machine. It describes a process of erasing loss surrounding Support Pipe with "TOC Thinking process" and development of two programs in this paper.

• 한국축산식품학회지
• /
• 제37권4호
• /
• pp.518-528
• /
• 2017

Quality characteristics of frozen cylindrical pork loin were evaluated following different tempering methods: 27.12 MHz curved-electrode radio frequency (RF) at 1000 and 1500 W, and forced-air convection (FC) or water immersion (WI) at $4^{\circ}C$ and $20^{\circ}C$. The developed RF tempering system with the newly designed curved-electrode achieved relatively uniform tempering compared to a parallel-plate RF system. FC tempering at $4^{\circ}C$ was the most time-consuming process, whereas 1500 W RF was the shortest. Pork sample drip loss, water holding capacity, color, and microbiological quality declined after WI tempering at $20^{\circ}C$. Conversely, RF tempering yielded minimal sample changes in drip loss, microstructure, color, and total aerobic bacteria counts, along with relatively uniform internal sample temperature distributions compared to those of the other tempering treatments. These results indicate that curved-electrode RF tempering could be used to provide rapid defrosting with minimal quality deterioration of cylindrical frozen meat block products.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.70-76
• /
• 2015

The ship hull is accomplished by assembling various curved surfaces. There are numerous existing methods for ship hull processing, which need certain appropriate processing methods to enable it to be more efficient. The curved hull plates can be divided into convex region and saddle region. It is common to use line heating method to form a saddle region, when it comes to a convex region, it will be triangle heating method to be utilized. A precise analysis for curvature domain is required for the application of proper processing method. There exist various problems on existing calculation methods of curvature domain. Therefore, a more powerful method is demanded to it more accurately. In this study, a method called Dual Contouring is applied to extract curved surfaces, which is able to improve accuracy of extracted area. Based on all above, a best-suited heat processing method should be selected.

• 해양환경안전학회지
• /
• 제17권3호
• /
• pp.295-300
• /
• 2011

선박은 상자형태 구조로 구성되어 있으며 선박의 선 수미, 선저만곡부, 갑판 등에 주로 사용하고 있다. 이런 구조는 박판구조이며 1차 지지부재로 사용된다. 평판구조와 비교하였을 때 상이한 거동을 보이며 일반적으로 압축하중을 받을 경우 곡률변화에 따라 다른 좌굴 및 최종 강도 경향을 나타냈다. 따라서 본 논문에서는 압축하중을 받고 있는 보강곡판인 1/2+1+1/2 bay 모델에 대하여 비선형유한요소해석을 수행하였으며 매개변수 영향은 곡률변화뿐만 아니라 세장비, 웨브높이/두께 등을 고려하여 해석모델에 대한 붕괴모드에 대해 검토하였다.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.69-75
• /
• 2016

Fabrication of the hull plate demands a lot of man-hour and a high degree of technology. In recent years, commercial shipping orders have been fallen because of intensifying competition with low price of order and labor cost. In order to solve this problem, a countermeasure such as a cost reduction is required. In this study, we are dealing with the method of supplying the forming information of the hull to the production site. We reviewed studies of hull forming that have been proposed so far to develop a method for providing hull forming information. On the basis of given production plans from the production site of shipyard, we discuss how to convert shell plate to production plan. Then, we will discuss the efficiency of the distribution method through the network about the method of hull forming. Thus, we have modified the distribution method which was proposed before. Finally, we will introduce the enhanced method for providing fabrication information of the hull plate to the small and medium-sized shipyards.