• Journal of the Korean Society of Costume
• /
• v.47
• /
• pp.125-142
• /
• 1999

Dancing along with mankind has existed in various ways form old age to the present. This dancing combined with artistic meaning is called the art of dancing. This study is mainly about the functions decorations and expressions of dancing costume and the claracteristics of the costumes by the 20th century designers Leon bakst Oskar Schlemer Pablo Picasso. The dancing costume were not so much different from those of the public from old age to middle age. In 18th and 19th centuries the length of the cotstumes become short from the knee to the thigh. The functions have much to do with the development of dancing for example the appearance of toeshoes. The costumes are designed not to prevent the movements of dancers smooth line in old age and ladylike vend high-blown line in the 18th and 19th centuries. Cotton and hemp textiles are turning into the transparent forms such as lace and gauge. The personal ornaments earings and necklaces have change into the pattern with wings and tassels. The dancing costumes of Leon Bakst Oskar Schlemer and Pablo Picasso are designed after the due consideration of body shape. Bakst focused on the beauty of smooth lines with splendid colors and decorations. Schlemer analyzed the body abstractly and metaphysically and expressed it with detaile and simple lines. Picasso emphasized cubic forms with cubism and expressed the characteristics of costumes with clear colors and smooth curved line. Bakst Schlemer and Picasso made the early 20th century the age of functional dancing costumes putting a light on the concept of space and foundation for the modern dancing costumes.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.415-417
• /
• 2003

we analyzed the electromagnetic behavior of a superconducting fault current limiter (SFCL) under the quench state using FEM. The analysis model used in this work is 5.5 KVA meander-line type SFCLs. Meshes of 3,650 triangular elements were used in the analysis of this SFCL. Analysis results showed that the distribution of current density was concentrated to inner curved line in meander-line type-SFCL and the maximum current density was 14.61 $A/m^2$ and also the maximum Joule heat was 2,030 $W/m^2$ in this region. We think that the new and the modified structure must be considered for an uniform distribution of the electromagnetic field.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.348-353
• /
• 2011

Iron fillings which were accumulated around the rail was often the cause of abnormal signal in case of signaling equipment using rail as transmission line. Iron fillings were generated on curved section of railroad due to the friction between rail and wheel, and metro line company urged to find the way to remove these iron fillings, because these were often the cause of abnormal signal. Magnetic device for trapping iron fillings around concrete slab tracks is introduced. The characteristics of magnetic device were analyzed using basic design and numerical analysis method. Magnetic device for trapping iron fillings were examined for application to the train which were operating in commercial line.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.703-709
• /
• 2008

In the shipyard, line heating and triangle heating are two major processes for forming curved plates in various shapes. While there have been many studies on line heating, triangle heating has been rarely studied due to its complicated heating process with irregular multi-heating paths and highly concentrated heat input. As the triangle heating process is one of the most labor-consuming jobs in shipyards, it is essential to study the automation as well as improvement of triangle heating process in order to increase hull forming productivity. In this study, a pioneering attempt to simulate triangle heating was made. A circular disk-spring model was proposed for elasto-plastic analysis procedure of triangle heating and the inherent strain method was also used to analyze the deformation of plates. Simulation results were compared with those of experiments and showed good agreement. It is shown that the present approach including analysis model used in this study is effective to simulate the triangle heating for plate forming process in shipbuilding.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.120-126
• /
• 2010

The line array roll set(LARS) process, as one of many kinds of incremental forming processes, is a continuous process in which a flat metal plate is formed into a singly or doubly curved plate through successive passes of forming rolls. It was found that the curvature level of the formed plates in the previous study was well over the curvature required in shipyards. This fact shows that the LARS method has good potential for shipbuilding applications. The major purpose of the present study is to estimate experimentally the general applicability of the line array roll set process for the manufacture of ship hull plates. In this study, the target shapes are selected through investigation of the shape classification of ship hull plates that comprise a certain vessel. Forming processes for twisted shapes are analyzed with the finite element method(FEM) and the results of experimental work are presented. On the basis of the experimental and numerical results, the LARS process is applied to the production of real outer hull plates of a small patrol ship.

• Animal Systematics, Evolution and Diversity
• /
• v.38 no.4
• /
• pp.214-221
• /
• 2022

Six species in five families of Lepidoptera were newly recorded from Korea. The adult specimens of these six species were obtained during the rearing caterpillars collected across Korea. Agonopterix omelkoi Lvovsky (Depresariidae) can be distinguished by the ochreous forewing with a dark brown slanted line, a dark brown triangular spot, and a blackish discal dot, and the whitish hindwing. Dichomeris ferruginosa Meyrick (Gelechiidae) can be diagnosed by the light brown forewing with two relatively large blackish dots and suffusion of dark brown along the dorsum and subtermen, and the grayish hindwing. Pseudohedya satoi Kawabe (Tortricidae) can be diagnosed by the dark ochreous forewing with several medially curved dark ochreous medial lines, and the large light grayish tornal marking, and the dark grayish hindwing. Rhodoneura hyphaema (West) (Thyrididae) can be diagnosed by the reddish forewing with a relatively thick postmedial band, and the reddish hindwing with a narrow dark reddish straight medial band. Comibaena subprocumbaria (Oberthür) (Geometridae) can be diagnosed by the greenish forewing with a whitish apical marking that bordered with a brownish or dark reddish line that connected to the termen, and the distal abdominal segments with whitish and dark reddish dots. Perixera absconditaria (Walker) (Geometridae) can be diagnosed by the light brownish forewing with a relatively thick, slanted, dentate brownish postmedial line, and the light brownish hindwing with a small white discal spot. We provide the diagnosis and figures of adults and larvae, and DNA barcoding data.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.219-222
• /
• 2023

Partial discharges (PD) have long been recognized as a major contributing factor to catastrophic failures in high-power equipment. As the demand for high voltage direct current (HVDC) facilities continues to rise, the significance of on-line and real-time monitoring of PD becomes increasingly prominent. In this study, we have designed, fabricated, and characterized a highly sensitive and cost-effective PD sensor comprising a pair of copper electrodes with different arc lengths. The key advantage of our sensor is its non-invasive nature, as it can be installed at any location along the entire power cable without requiring structural modifications. In contrast, conventional PD sensors are typically limited to installation at cable terminals or insulation joint boxes, often necessitating invasive alterations. Our PD sensor demonstrates exceptional accuracy in estimating PD location, with a success rate exceeding 95% in the straight sections of the power cable and surpassing 89% in curved sections. These remarkable characteristics indicate its high potential for realtime and on-line detection of PD.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.3
• /
• pp.51-61
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Constitutions. We are developing 3D Automatic Face Recognition Apparatus(3D-AFRA) to analyse the facial characteristics. This apparatus show us 3D image and data of man's face and measure facial figure data. So We should examine the Measurement of Facial Figure data error of 3D Automatic Face Recognition Apparatus(3D-AFRA) in Software Error Analysis. 2. Methods We scanned face status by using 3D Automatic Face Recognition Apparatus(3D-AFRA). And we measured lengths Between Facial Definition Parameters of facial figure data by Facial Measurement program. 2.1 Repeatability test We measured lengths Between Facial Definition Parameters of facial figure data restored by 3D-AFRA by Facial Measurement program 10 times. Then we compared 10 results each other for repeatability test. 2.2 Measurement error test We measured lengths Between Facial Definition Parameters of facial figure data by two different measurement program that are Facial Measurement program and Rapidform2006. At measuring lengths Between Facial Definition Parameters, we uses two measurement way. The one is straight line measurement, the other is curved line measurement. Then we compared results measured by Facial Measurement program with results measured by Rapidform2006. 3. Results and Conclusions In repeatability test, standard deviation of results is 0.084-0.450mm. And in straight line measurement error test, the average error 0.0582mm, and the maximum error was 0.28mm. In curved line measurement error test, the average error 0.413mm, and the maximum error was 1.53mm. In conclusion, we assessed that the accuracy and repeatability of Facial Measurement program is considerably good. From now on we complement accuracy of 3D-AFRA in Hardware and Software.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.979-990
• /
• 2016

This study presents a nonlinear finite element procedure involving a phenomenological model to validate the tensile strain capacity of the X80 line pipe developed for the strain-based design purpose. The procedure is based on the Gurson-Tvergaard-Needleman (GTN) model, which models nucleation, growth and coalescence of void volume fraction occurred inside a metal. In this study, the user-defined material module (UMAT) is implemented in the commercial finite element platform ABAQUS and is applied to the nonlinear damage analysis of steel specimens. Material parameters for the nonlinear damage analysis of base and weld metals are calibrated from numerical simulations for the tensile tests of round bar and full thickness specimens. They are then employed in the numerical simulations for SENT (Single Edge Notch Tension) test and CWPT (Curved Wide Plate Test) and in the simulations, the tensile strain capacities are naturally evaluated. Comparison of the numerical results with the experimental results and the conventional empirical formulae shows that the proposed numerical procedure can fairly well predict the tensile strain capacity of X80 line pipe. So, it is readily expected to be effectively applied to the strain-based design procedure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.183-195
• /
• 1990

The author has studied the effect of clothes design to mask the dorsal curvature that is one of the commonest changes in elderly women. Body measurements including the body type and the status of dorsal curvature were perfor-med on 153 women of over 60 years of age, and then a body form to fit to the mean measure-ments was made to evaluate the effects of various designs to it. With 31 pattern designs modified by changing in their slash lines and gathers using darts, the diminishing effect of the rounded back were evaluated by means of sensory test. The results of this study can be summarized as follows: I . Results from the body measurements 1) The mean body type in elderly women was that of obesity. 2) With the advancement of age, the angle to indicate the degree of dorsal curvature as well as the angle to indicate the posture are increased. II . Concerning to the clothes design to diminish the shape of dorsal curvature 1) Among the designs by the position of darts, the basic pattern (Fig. 5-1-(1)) showed the best effect to mask the shape of dorsal curvature. 2) Out of the applied designs of princess lines, that in which the slash line is pointing toward the shoulder point (Fig. 5-2-(1)) seemed to be most effective. 3) What has angled princess line (Fig. 5-3-(1)) had the most diminishing effect among the waist darts and armhole princess lines. 4) Among the V-shaped designs, the slashed at the shoulder point (Fig. 5-4-(1)) had the best effect to lessen the shape of the dorsal cuuature. 5) Wider angle yoke had better effect to the narrow angle one among the designs with straight yoke, and that with downward direction (Fig. 5-5-(1)) showed the best effect. 6) Between straight wide angle yoke and curved yoke, that of curved one with downward direction (Fig. 5-6-(1)) had better effect as far as the masking effect of dorsal curvature is concerned. 7) Gathers around the neck showed better effect to those around the shoulder, and the more amount of gathers (Fig. 5-7-(1)), there was better effect. 8) The design with midline gathers at the level of horizontal slash line of armhole (Fig. 5-8-(1)) showed better effect to that with seperated gathers. 9) In case of design with gathers at the horizontal line of armhole, it showed the better effect with less amount of gathers in midline ones, but with more amount in the side ones. 10) Considering all 7 different designs with better effect in covering the shape of dorsal curvature, it was evident that the design with gathers was far better than the design with application of slash lines.