• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.793-808
• /
• 2018

In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

• 한국결정성장학회지
• /
• 제31권5호
• /
• pp.212-217
• /
• 2021

Silica sol에 YAG 형광체를 첨가량별로 spin 코팅 후, 코팅막의 blue LED에서 백색광이 발현되는 정도와 표면 및 곡면 코팅용 binder로써, 적용가능성을 확인하였다. SEM, PSA를 통해YAG의 입자 크기는 D₅₀: 9~10 ㎛ 내외이며, XRD를 통해 YAG의 결정구조가 garnet(Y₃Al₅O₁₂), cubic인 것을 확인하였다. 코팅막은 crack이 없고 동시에 silica sol이YAG 형광체를 균질하게 도포된 형상을 보였으며, 첨가량 증가와 비례하게 코팅막 내에서 YAG 첨가량과 두께는 최대 40 ㎛까지 증가하는 추세를 보였다. 그리고 YAG 첨가량이 증가할수록 PL emission intensity 증가와 chromatic locus 곡선 끝 방향으로 색좌표 이동을 확인하였다. Soda-lime 유리기판 표면에 코팅 후, crack이 없으며 YAG 형광체가 균질하게 도포된 코팅성과 코팅막의 백색광 발현특성을 확인할 수 있었고 이는 직접적으로 LED에 다양한 형태의 형광 형상의 구현이 가능하다는 것을 의미한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.1-15
• /
• 2011

This paper reviews most of the research done in the field of tensile buckling characteristics pertaining to aerospace structural elements with special attention to local buckling and parametric excitation due to periodic loading on plate and shell elements. The concepts of buckling in aerospace structures appear as the result of the application of a global compressive applied load or shear load. A less usual situation is the case, in which a global tensile stress creates buckling instability and the formation of complex spatial buckling pattern. In contrast to the case of a pure compression or shear load, here the applied macroscopic load has no compressive component and is thus globally stabilizing. The instability stems from a local compressive stress induced by the presence of a defect, such as a crack or a hole, due to partial or non-uniform applied load at the far end. This is referred to as tensile buckling. This paper discusses all aspects of tensile buckling, theoretical and experimental. Its far reaching applications causing local instability in aerospace structural components are discussed. The important effects on dynamic stability behaviour under locally induced periodic compression have been identified and influences of various parameters are discussed. Experimental results on simple and combination resonance characteristics on plate structures due to tensile buckling effects are elaborated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.442-445
• /
• 2006

This paper presents an analytical prediction of nonlinear characteristics and behavior characteristics PSC structures with un-bonded tendon system. In this paper, a numerical model for un-bonded tendon is proposed based on the finite element method, which can represent straight or curved un-bonded tendon behavior. this model and time-dependent material model used to investigate the time-dependent behavior of un-bonded prestressed concrete structures. The accuracy and objectivity of the assessment process may be enhanced by the use of sophisticated nonlinear finite element analysis program. A computer program, named RCAHEST(Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of concrete structures and steel plate was used. The material nonlinearities are taken into account by comprising the tension, compression, and shear models of cracked concrete and models for reinforcements and tendons in the concrete. The smeared crack approach is incorporated. It accounts for the aging, creep and shrinkage of concrete and the stress relaxation of prestressed steel. The proposed un-bonded tendon model and numerical method of un-bonded prestressed concrete structures is verified by comparison with reliable experimental results.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1031-1038
• /
• 2001

In order to verify the analytical methods predicting failure behavior of cracked piping, full-scale pipe tests are crucial in nuclear power plant piping. For this reason, series of international test programs have been conducted. However, full-scale pipe tests require expensive testing equipment and long period of testing time. The objective of this paper is to develop a test system which can economically simulate the full-scale pipe test regarding the integrity evaluation. This system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system was developed for the integrity evaluation of nuclear piping based on the methodology of hardware-in-the-loop (HiL) simulation. Using this simulator, the piping integrity can be evaluated based on the elastic-plastic behavior of full-scale pipe, and the high cost full-scale pipe test may be replaced with this economical system.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.333-340
• /
• 2004

최근 장대화 되어가는 강교량의 건설 기술발전에 따라, 자중이 가벼운 강바닥판 형식의 교량 사용이 증가되고 있다. 그러나 강바닥판 교량은 피로에 매우 취약한 구조형식이며, 특히 종리브와 횡리브가 교차되는 상세부에서의 피로균열은 강바닥판 교량이 가지고 있는 가장 큰 문제점 중 하나이다. 이러한 피로균열의 발생원인은 횡리브의 면외거동에 의한 2차 응력으로부터 유발된다. 본 연구에서는 강바닥판 교량의 피로균열을 억제하고, 종리브-횡리브 교차연결부의 상세개선을 위해 3차원 실물모형체의 피로실험과 범용구조해석 프로그램인 LUSAS를 이용한 세부변수 해석을 병행하여 최적의 상세를 제시하기 위한 연구를 수행하였다. 연구 결과, 국내 표준단면 형상에 곡선형 벌크헤드 플레이트를 부착한 상세가 가장 유리한 것으로 나타났으며, 세부 변수해석에 의한 개선 단면 적용시 발생되는 응력값이 최대의 경우 약 50%이상까지 감소하는 것으로 나타났다. 응력의 감소와 함께 횡리브의 간격 증대(G=400)에 따른 4%의 강재량과 34%의 용접길이 감소로 제작원가 절감 및 피로에 유리한 강바닥판교의 제작이 가능하게 되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.43-46
• /
• 2010

As the nuclear power plant has been constructed continuously for several decades in Korea, the welding technology for components manufacturing and installation has been improved largely. Standardization for weld test and qualification was also established systematically according to the concerned code. The welding for the main components requires the high reliability to keep the constant quality level, which means the repeatability of weld quality. Therefore the weld process qualified by thorough test and evaluation is able to be applied for manufacturing. Narrow gap SAW and GTAW process are usually applied for girth seam welding of pressure vessel like Reactor vessel, steam generator, and etc. For the surface cladding with stainless steel and Inconel material, strip welding process is mainly used. Inside cladding of nozzles is additionally applied with Hot wire GTAW and semi-auto welding process. Especially the weld joint having elliptical weld line on curved surface needs a specialized weld system which is automatically rotating with adjusting position of the head torch. The small sized pipe, tube, and internal parts of reactor vessel requests precise weld processes like an automatic GTAW and electron beam welding. Welding of dissimilar materials including Inconel690 material has high possibility of weld defects like a lack of fusion, various types of crack. To avoid these kinds of problem, optimum weld parameters and sequence should be set up through the many tests. As the life extension of nuclear power plant is general trend, weld technologies having higher reliability is required gradually. More development of specialized welding systems, weld part analysis and evaluation, and life prediction for main components should be taken into a consideration extensively.

• 지질공학
• /
• 제30권3호
• /
• pp.289-302
• /
• 2020

2016년 경상남도 하동군 땅밀림 지역의 지하구조와 미끄럼사면을 파악하기 위해 지구물리탐사(전기비 저항, 탄성파 굴절법, 시추공 영상촬영)와 사면안정해석을 실시하였다. 시추조사와 탄성파속도로 해석된 사면의 지층 및 지하구조는 20여 m의 두터운 퇴적층 밑에 구간에 따라 1 m보다 얇은 풍화암 및 연암이 각각 분포한다. 지표지질조사를 통하여 관찰된 인장균열의 지표흔적을 기준으로 시추공 BH-2에서 영상촬영을 수행하여 확인된 집중 파쇄대의 분포는 지하수면과 쌍극자배열 전기비저항 단면에서 해석된 활동연약대의 깊이와 잘 부합한다. 기반암 표면의 고비저항 돌출부는 연약대의 하부 진행을 막는 일종의 자연적인 받침대 역할을 하여 이것을 경계점으로 활동면이 미끄러지고 약간 위로 올라가는 휘어진 파괴면을 수반하는 땅밀림의 특성을 설명해준다. 활동연약대에 대한 사면안정해석에서 지하수면의 변동시켜가며 건기와 우기의 안전율을 계산한 결과 우기에 해당되는 0.89의 낮은 값은 지하수로 완전포화된 물질에 기인하는 바 조사지역의 사면은 호우 시 불안정한 사면으로 해석된다.