• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.365-373
• /
• 2011

In general, when train drives boost and traction mode, force of delivering to the track was difference between boost and traction driving mode. But, in korea, we've never performed that measure the track wheel load and lateral force while boost and traction driving. This study measured wheel load and lateral force using combination of 7200type locomotive and six freight car. And the train used single and automatic brake. The train drives boost and traction mode. In order to the difference radius of curve, we had measured at 3 point in the curve of turnout.

• International Journal of Railway
• /
• 제5권2호
• /
• pp.93-101
• /
• 2012

Owing to the lightening of railway vehicles and increased operation speeds, the reduction of running safety in the presence of crosswind is becoming an important problem. In particular, the running safety tends to decrease when vehicles run on curved track. When a crosswind acts on a vehicle negotiating a curve from the outer side, flange climbing can occur. In this study, a full-vehicle model was constructed using the multi-body simulation software SIMPACK, and a simulation of a bogie vehicle with two-axle trucks negotiating a curve was carried out to examine the running safety under the condition where a crosswind acts on the vehicle from the outer side of the curve. As a result, it was verified that the derailment coefficient of the first wheelset becomes large in the exit transition curve and the coefficient of the third wheelset does in the entrance transition curve, and this trend becomes pronounced at low operation speeds in the presence of a stronger crosswind. It was also shown that the critical derailment coefficients obtained by modified Nadal's formula considering the effect of attack angle become close to the actual derailment coefficients at the timing that flange climbing occurs.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1611-1619
• /
• 2015

트랙 슈는 건설 중장비의 무한궤도에 사용되는 중요한 핵심 부품으로 열악한 환경에서 사용되기 때문에 충분한 강도와 충격인성이 확보되어야 한다. 본 연구에서는 보론 첨가강으로 만들어지는 트랙 슈의 경화능을 죠미니 H-밴드법을 통해 먼저 확인한 후, 충격인성 개선을 목표로 다구찌의 직교배열실험법을 사용하여 트랙 슈의 제조공정을 최적화하여 트랙 슈의 충격인성 향상을 꾀하고자 하였다. 공정변수로는 트랙 슈의 제조과정에 있는 블룸소재별 압하비, 뜨임 온도, 뜨임 유지시간을 택하였으며, 직교배열 실험을 수행하여 이들 변수가 샤르피 충격실험으로 평가한 충격인성에 미치는 영향을 평가였다. 그 결과, 트랙 슈의 충격인성은 압하비가 높은 쪽이 유리하고, 뜨임 온도는 $210^{\circ}C$, 뜨임 유지 시간은 80분이 유리하다는 것을 알 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.299-307
• /
• 2005

The 180 km/h Korean Tilting Train(TTX) which is now developing as a part of the Korean National R&D project, was elaborately designed. As the tilting trains run curve track with the $30\%$ higher speed than normal trains, the higher centrifugal and dynamic force are expected. Furthermore the complex tilting system increase the probability of failure. Therefore it is very important for tilting train to ensure safety against derailment under the various kind of failed condition in the middle of running as well as normal operating condition. The TTX train have the relatively high roll stiffness to improve the lateral ride comfort and to limit the roll displacement on the curve. But the higher roll stiffness increase the risk of derailment on the twisted track. This paper describes the study to review the safety against derailment caused by the wheel unloading on the severely twisted track. The worst combination of maximum cant change with maximum twist defect was established by numerical simulation. And also it was assumed that the air bag deflated and still the train run its speed limit. Those kind of assumption might be the worst case from the view point of wheel unloading derailment on the twisted track. The dynamic simulation was done by means of VAMPIRE S/W and non-linear transient analysis. We found that derailment quotients Q/P was only slightly influenced by track twist but the wheel unloading was greatly influenced. And we ascertained that the higher roll stiffness the higher wheel unloading. In case of air bag deflated situation, the wheel unloading reached up to $100\%$ which means the wheel lift or jumped. Therefore it was concluded that the design need to be improved to ensure the safety against derailment on the maximum twisted track in case of air bag deflated and tilting train's speed limit.

• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.578-585
• /
• 2015

궤도의 탄성 구성요소는 기술적 및 경제적으로 효율적인 철도 네트워크를 위해 궤도상부구조로 잘 통합될 수 있다. 탄성 레일패드는 곡선반경이 800m보다 큰 경우 부드러운 레일지점과 고속(160km/h 이상)을 제공한다. 높은 궤도저항성은 눈에 띄게 다짐주기를 연장시킨다. 침목패드의 꾸준히 증가된 점유율은 향상된 다짐주기와 연마주기를 제공하고, 좁은 곡선반경에서도 기술적인 철도구조물 그리고 고체음의 감소에 대한 대책을 제공하기 때문이다. 밸러스트 매트의 설치는 신설선 건설 또는 광범위한 혁신 조치의 차원에서 특히 방진 및 구조물 보호와 같은 좋은 효과를 준다. 다만, 적절한 설치에는 세심한 주의가 필요하다.

• Steel and Composite Structures
• /
• 제31권5호
• /
• pp.437-452
• /
• 2019

In this study, in-situ static and dynamic tests of four pre-stressed concrete (PC) track beams with different span lengths and curvatures in a straddle monorail transit system were reported. In the static load tests, the strain and deflection at critical sections of the PC track beams were measured to determine the load bearing capacity and stiffness. The dynamic responses of strain, deflection, acceleration, and displacement at key positions of the PC track beams were measured under different train speeds and train loads to systematically study the dynamic behaviors of the PC track beams. A three-dimensional finite element model of the track beam-vehicle coupled vibration system was established to help understand the dynamic behavior of the system, and the model was verified using the test results. The research results show that the curvature, span length, train speed, and train loads have significant influence on the dynamic responses of the PC track beams. The dynamic performance of the PC track beams in the curve section is susceptible to dynamic loads. Appropriate train loads can effectively reduce the impact of the train on the PC track beam. The PC track beams allow good riding comfort.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.130-135
• /
• 2016

It is very hard to analyze the train derailment safety quantitatively at the curved section because of the diversified affect parameters including the complex interaction between wheel and rail, the train conditions such as the shape of wheel, suspension system, the track conditions such as the radius of curve, cant, transition curve, and the operation conditions, etc. Two major factors related to the running safety of railway vehicle are classified as the railway vehicle and the track condition. In this study, when the railway vehicle passing through curves of actual track condition of subway line NO.3 in seoul ($Yeonsinnae{\leftrightarrow}Gupabal$), the effect that has influence on running safety depending on rail inclination. The analysis result of 1/40 rail inclination condition is more favorable on running safety than other rail inclination conditions because derailment coefficient and wheel unloading ratio are the lowest.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1187-1190
• /
• 2009

CURVE SQUEAL NOISE IS THE INTENSE HIGH FREQUENCY TONAL THAT CAN OCCUR WHEN A RAILWAY VEHICLE TRAVERSES A CURVE OR A SWITCH. THE HIGH NOISE LEVEL CAUSES ANNOYANCE FOR PEOPLE WHO LIVE IN THE NEIGHBOURHOOD OF THE SQUEALING RAILWAY TRACK AS WELL AS FOR THE PASSENGERS IN CARS WITH CURVES. THIS PAPER EXAMINES THE SPECTRAL SOUND DISTRIBUTION IN CURVES FOR KTX TRAIN. THE FREQUENCY RANGE IS FROM AROUND 4,000 TO ALMOST 16,000Hz, WITH NOISE LEVELS UP TO 92dB IN CURVE R400.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.379-386
• /
• 2007

Recently the concrete slab tracks are being constructed on roadbed in the Kyong-bu 2nd stage high speed railways. In responding to this trend, new design standards and track materials maintenance systems, based on the slab track material safety and usage perspective, are needed. This research provides the design standards and the maintenance system. The proposed standards and the maintenance system are based on the track theory and the track-train interaction program developed, where the roadbed displacement and train speed are utilized as mediating variables. In the analysis, the dynamic response of track-train interaction apply to various speeds and displacements. the roadbed displacement is shown in a sine curve, the scope of the displacement occurrence, presented in its wavelenths, include 6meters, 10meters, 15meters, 20meters, 30meters. the train speeds involved are 50,100, 150,200,250,300,350,400 kilometers per hour.

• 한국운동역학회지
• /
• 제23권2호
• /
• pp.109-116
• /
• 2013

The purpose of this study was to provide fundamental information for the enhancement of performance through kinematic analysis of cornering according to the radius of curve course in short track speed skating. To perform this study, six skaters: three narrow radius players(N, body mass: $56.0{\pm}7.2$ kg, height: $163.7{\pm}5.1$ cm, age: $21.3{\pm}1.5$ yrs) and three wide radius players(W, body mass: $61.0{\pm}9.5$ kg, height: $169.0{\pm}4.4$ cm, age: $20.0{\pm}1.7$ yrs). Three-dimensional motion analysis was performed on the section from the forth block starting to show the change of radius to the sixth block using eight infrared cameras(sampling frequency of 100 Hz for N and W players). The time of push-off was greater for N than for W(p<.05) while the radius of center of mass was greater for W than for N(p<.05). The flexion and extension of knee and hip joint were greater for N than for W(p<.05). The external rotation of left knee joint was greater for N than for W(p<.05). Based on the findings, a small radius by increasing the range of the flexion and extension of knee and hip joint with greater external rotation of left knee joint would be related to more efficient run at curve. It is expected that these results will be useful in developing a training program for enhancing performance of short track speed skating athletes.