• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 사면안정 학술발표회 논문집
• /
• pp.99-110
• /
• 1998

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.461-472
• /
• 2015

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.331-336
• /
• 2002

Recently the critical nozzles with small diameter are being extensively used to measure mass flow in a variety of industrial fields and these have different configurations depending on operation condition and working gas. The curvature radius of the critical nozzle throat is one of the most important configuration factors promising a high reliability of the critical nozzle. In the present study, computations using the axisymmetric, compressible, Navier-Stokes equations are carried out to investigate the effect of the nozzle curvature on critical flows. The diameter of the critical nozzle employed is D=0.3mm and the radius of curvature of the critical nozzle throat is varied in the range from 1D to 3D. It is found that the discharge coefficient is very sensitive to the curvature radius(R) of critical nozzle, leading to the peak discharge coefficient at R = 2.0D and 2.5D, and that the critical pressure ratio increases with the curvature radius.

• Computers and Concrete
• /
• 제16권2호
• /
• pp.191-207
• /
• 2015

It is generally accepted that, in the interest of safety, it is essential to provide a minimum level of flexural ductility, which will allow energy dissipation and moment redistribution as required. If one wishes to be uniformly conservative across all of the design variables, curvature ductility and moment redistribution factor should be calculated using a probabilistic method, as is the case for other design parameters in reinforced concrete mechanics. In this study, simple expressions are derived for the evaluation of curvature ductility and moment redistribution factor, based on the concept of demand and capacity rotation. Probabilistic models are then derived for both the curvature ductility and the moment redistribution factor, by means of central limit theorem and through taking advantage of the specific behaviour of moment redistribution factor as a function of curvature ductility and plastic hinge length. The Monte Carlo Simulation (MCS) method is used to check and verify the results of the proposed method. Although some minor simplifications are made in the proposed method, there is a very good agreement between the MCS and the proposed method. The proposed method could be used in any future probabilistic evaluation of curvature ductility and moment redistribution factors.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.116-126
• /
• 2019

The purpose of this study is to objectify the shape of curvature and average change rate of angular and arched eyebrow makeup. The data for the analysis were the final 336 pieces for the cosmetology students in the whole country. SPSS 20.0 program was used for the collected data, frequency analysis, factor analysis, reliability analysis, and crossover analysis were performed. First, the frequency of the average change rate of eyebrow makeup (angular and arcuate) was analyzed. As a result, the eyebrows suitable for the angled type showed the highest level of 'A-2' and the arched eyebrows had the highest level of 'B-2'. Second, to analyze the important factors of eyebrow makeup, frequency of eyebrows was the most important, followed by the inclination of eyebrows and eyebrow tail. Third, factor analysis and reliability analysis were conducted to examine each dimension of eyebrow makeup perception, and it was derived from three factors including acceptability, aggressiveness, and playability. Fourth, in order to analyze the difference of important factors in the form of the standard eyebrow makeup, the cross - analysis was performed with chi - square test, and it was confirmed that the angular eyebrow makeup showed the most objectivity when the average change rate was 0.29 and the curvature was 0.67. Fifth, arcuate eyebrow makeup showed the most objectivity when the average change rate was 0.57 and curvature was 0.56. The results of this analysis can be used as objective data of aesthetic criteria when designing the eyebrow shape.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.421-431
• /
• 2022

Concrete slab cracks monitoring of modern high-speed railway is important for safety and reliability of train operation, to prevent catastrophic failure, and to reduce maintenance costs. This paper proposes a curvature filtering improved crack detection method in concrete slabs of high-speed railway via graph-based anomalies calculation. Firstly, large curvature information contained in the images is extracted for the crack identification based on an improved curvature filtering method. Secondly, a graph-based model is developed for the image sub-blocks anomalies calculation where the baseline of the sub-blocks is acquired by crack-free samples. Once the anomaly is large than the acquired baseline, the sub-block is considered as crack-contained block. The experimental results indicate that the proposed method performs better than convolutional neural network method even under different curvature structures and illumination conditions. This work therefore provides a useful tool for concrete slabs crack detection and is broadly applicable to variety of infrastructure systems.

• 전산구조공학
• /
• 제7권1호
• /
• pp.109-116
• /
• 1994

구조물의 신뢰도를 평가하는 방법을 살표보고 각각의 장.단점을 비교한다. 각 방법의 정확성을 평가하는 기준으로는 Crude Monte Carlo(CMC)방법을 택하여 Importance Sampling(IS)방법, 그리고 Directional Simulation(DS) 방법을 살펴보고 1차 근사방법은 현재 많이 사용되고 있는 Rackwitz-Fiessler(RF)방법, Chen과 Lind가 제안한 3-parameter방법(CL), Hohenbichler가 제안한 Rosenblatt 변환방법(RT)을 그리고 2차 근사방법은 Breitung이 제안한 곡률적합 포물선 (Curvature Fitted Paraboloid, CFP) 공식과 Kiureghian이 제안한 점적합 포물선(Point Fitted Paraboloid, PFP)공식, 그리고 Log-Likelihood Function을 이용하여 원변수공간에서 파괴확률을 구하는 2차 근사공식(LLF)을 비교한다. 그리고 한계상태식이 불명확할 때 효율적으로 사용할 수 있는 반응응답법(Response sufrace method, RSM)을 살펴본다. 각 방법의 효율성 특히 적용 가능성을 예제를 통해 해석한 결과 추출법의 경우는 DS방법이, 그리고 근사방법에서는 RSM방법이 효율적임을 알 수 있다.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.114-118
• /
• 2021

In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the length and radius of curvature according to the measurement method, and the null hypothesis that no error occurred when measuring the angle and length was established. Based on this experimental data, the automatic measurement when measuring the projector causes less measurement error, so automatic measurement is recommended when measuring a small product. Also, an optimal measuring method is suggested for securing reliability on formulations of measurement automation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.206-209
• /
• 2002

With the progress of semiconductor processing technology, avalanohe photodiodes (APDs) based on InP/InGaAs are used for high-speed optical receiver modules. Planar-type APDs give higher reliability than mesa-type APDs. However, Planar-type APDs are struggled with a problem of intensed electric field at the junction curvature, which causes edge breakdown phenomena at the junction periphery. In this paper, we focused on studying the effects of junction curvature for APDs performances by different etching processes followed by single diffusion to from p-n junction. The performance of each process is characterized by observing electric field profiles and carrier generation rates. From the results, it can be understood to predict the optimum structure, which can minimize edge breakdown and improve the manufacturability.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.129-133
• /
• 2000

It is reasonable to use the stereo vision and image processing technique to digitize 3D coordinates of grid points and to evaluate surface strains on a sheet metal parts. However this method has its intrinsic problems such as the difficulty in enhancement of bad images inevitable error due to digital image resolution of camera and frame grabber unreliability of strains and thickness evaluated from coarse grid on the corner area with large curvature and the limitation of the area that can be measured at a time. Therefore it is still hard to measure strain distribution over the entire surface of a medium,- or large-sized stamped part at a time even by using an automated strain measurement system. In this study the curvature correction algorithm based on the grid refinement and the geometry assembling algorithm based on the global error minimization (GEM) scheme are suggested. Several applications are presented to show the reliability and efficiency of these algorithms.