• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.452-465
• /
• 2016

In this study, the structure of a concave annular array transducer was optimized to generate high intensity focused ultrasound for medical therapeutic application. The transducer has a phased array structure composed of several concentric channels that have 40 mm as the radius of curvature. We derived theoretical equations to analyze the sound field of the transducer and verified the validity of the equations by comparing the results calculated by the equations with those from finite element analyses. We also checked the possibility of dynamic focusing at around the geometric focal point. Further, the level of a grating lobe occurring at an unwanted position in the transducer sound field was confirmed to be reducible through the relation between the number of channels and the frequency of the transducer. Hence, the structure of the transducer was optimized to place the main lobe within a specific range from the zenith while systematically reducing the level of the maximum sidelobe including the grating lobe. The designed structure showed the performance better than that targeted at all the focal points.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.400-406
• /
• 2021

The primary effect of the far-field underwater explosion (UNDEX) is the whipping of the ship hull girder. This paper aims to verify why inelastic effects should be considered in the whipping response estimations from the UNDEX simulations. A navy ship was modeled using Timoshenko beam elements over the ship length uniformly keeping the constant midship section modulus. The transient UNDEX pressure was produced using two types of the Geers-Hunter doubly-asymptotic models: compressible and incompressible fluids. Because the UNDEX model based on incompressible fluid assumption provided more increased fluid volume acceleration in the bubble phase, the incompressible fluid-based UNDEX model was adopted for the inelastic whipping response analyses. The non-linear hull girder bending moment-curvature curve was used to embed inelastic effects in the UNDEX analyses where the Smith method was applied to derive the non-linear stiffness. We assumed two stand-off distances to see more apparent inelastic effects: 40.5 m and 35.5 m. In the case of the 35.5 m stand-off distance, there was a statistically significant inelastic effect in terms of the average of peak moments and the average exceeding proportional limit moments. For the conservative design of a naval ship under UNDEX, it is recommended to use incompressible fluid. In the viewpoint of cost-effective naval ship design, the inelastic effects should be taken into account.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.333-338
• /
• 2008

The coastal zone is a delicate and dynamic area in which the majority of a water kinetic energy is dissipated. These processes are subsequent to the transport of the beach materials. In comparison to emerged breakwaters, submerged structures permit the passage of some wave energy and in turn allow for circulation along the shoreline zone. This research aims to examine the beach erosion prevention capability of submerged structure by laboratory model. The flow characteristics behind a submerged obstacle with bottom gap were experimentally investigated at Re = $1.2{\times}10^4$ using the two-frame PIV(CACTUS 2000) system. Streamline curvature field behind the obstacle has been obtained by using the data of time-averaged mean velocity information. And the large eddy structure in the separated shear layer seems to have signification influence on the development of the separated shear layer. As bottom gap size increases, the recirculation occurring behind the obstacle moves toward downstream and its strength is weakened.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.65-69
• /
• 2008

Purpose: To develop a dot sight device for a sighting shot using the doublet reflector. Methods: We designed the singlet reflector and the doublet reflector by Sigma 2000 program and compared the one to the other. Results: In analysis of finite ray aberration, we could confirm that it has the effective field of view with the free-parallax which is 3.3 times wider than the existing dot sight device using the singlet reflector. If you use the doublet reflector, the central thickness of optical system become more than two times bigger than the existing one. As a result, when the image of a target object is made on the observer's retina, if you make the first side's radius of curvature equal with the second one as the case of the singlet reflector, changes in magnification are appeared. To conquer this problem, we had to make be satisfied with the afocal condition in the case of doublet reflector. Conclusions: we could develop the dot sight device for a sighting shot using the doublet reflector which has the effective field of view with the free-parallax which is 3.3 times wider than the existing dot sight device using the singlet reflector.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.155-164
• /
• 2005

In contrast with product design field, some designers who work in furniture field tend to do their own studio works as well as typical designing part. Especially in the small furniture studios for the limited quantity batch production, custom made or handmade craft furniture which is finished with high quality, the propensity for their own production is more obvious than in the big furniture companies in this case. In this kind of small-scale furniture studios, they have more chance to create the various formative works and 'curved shape' is one of the most important elements to form creative pieces. Except by caning, it is very difficult to make curved wooden shape because of own characteristic of wood. Therefore, the special techniques of bending wood are essential to formative furniture production and vacuum press system is introduced as a main subject for the bending wood method in this study. Especially for the designers who work as makers as well at the small furniture studios, the value of vacuum press system on efficiency and productivity of work was sought by testing and improving the method of wood bending techniques. According to this practical searching, ideally sufficient condition on vacuum pressing work was founded as a result on this study.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2013

Ftheta Lens, whose image height is proportional to its field view angle, is one of the most important parts in Laser Scanning Unit(LSU). In this paper $f{\theta}$ lens design, mold production and modification method of lens design and mold are introduced. Lens design was carried out with Zemax and Special Toric surfaces were applied for lens surfaces to minimize distortion both in main and sub scanning directions. And a high precision machine with 1nm resolution was used to fabricate lens mold cores. After injection the lens was evaluated and the difference from design was examined. This difference was compensated by modifying lens design and new lens mold cores were made according to modified lens design to obtain the quality of original design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.153-160
• /
• 2008

In this study, we propose a new three-node hybrid-mixed curved beam element with the relaxed-equiribrium stress functions for static analysis. The proposed element considering shear deformation is based on the Hellinger-Reissner variational principle. The stress functions are carefully chosen from three important considerations: (i) all the kinematic deformation modes must be suppressed, and (ii) the spurious constraints must be removed in the limiting behaviors via the field-consistency, and (iii) the relaxed equilibrium conditions could be incorporated because it might be impossible to select the stress functions and parameters to fully satisfy both the equiribrium conditions and the suppression of kinematic deformation modes in the three-node curved beam hybrid-mixed formulation. Numerical examples confirm the superior and stable behavior of the proposed element regardless of slenderness ratio and curvature. Besides, the proposed element shows the outstanding performance in predicting the stress resultant distributions.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.1
• /
• pp.21-33
• /
• 2013

Weight of evidence model was applied for potential mapping of mountainous wetland to reduce the range of the field survey and to increase the efficiency of operations because the surveys of mountainous wetland need a lot of time and money owing to inaccessibility and extensiveness. The relationship between mountainous wetland location and related factors is expressed as a probability by Weight of evidence model. For this, the spatial database consist of slope map, curvature map, vegetation index map, wetness index map, soil drainage rating map was constructed in Yeongnam area, Korea, and weights of evidence based on the relationship between mountainous wetland location and each factor rating were calculated. As a result of correlation analysis between mountainous wetland location and each factors rating using likelihood ratio values, the probability of mountainous wetlands were increased at condition of lower slope, lower curvature, lower vegetation index value, lower wetness value, moderate soil drainage rating. Mountainous Wetland Potential Index(MWPI) was calculated by summation of the likelihood ratio and mountainous wetland potential map was constucted from GIS integration. The mountain wetland potential map was verified by comparison with the known mountainous wetland locations. The result showed the 75.48% in prediction accuracy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.793-799
• /
• 2023

This study classifies the types of urban railway stations that reflect the location characteristics of urban railway stations, the structure and form of station taxes, and the number of users, and the level of inconvenience in the transfer movement line for users by station type, the number and connectivity of transfer information, and the level of transfer convenience facilities. The number of installations, conflicts between users, and transfer information signs were analyzed. As a result of data analysis, it was found that the factors that cause the most inconvenience to urban rail users when transferring are the length and curvature of the transfer line, pedestrian density and number of passengers in the transfer passage, presence or absence of transportation convenience facilities, and the size and height of transfer information letters. These transfer inconveniences were objectified, quantified, and presented as evaluation indicators that can measure the transfer convenience of urban railway stations. Additionally, an evaluation scale was developed to measure the service level for each evaluation indicator. The evaluation scale for each indicator presented six levels by applying linear interpolation based on the maximum and minimum values of data derived through field surveys. However, it is judged that a comprehensive evaluation of transfer convenience that combines the importance and weight of each convenience evaluation indicator should be established through future research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1177-1189
• /
• 1994

This paper aims to develop the numerical model for prediction of the channel migration by analyzing of sediment and flow characteristics with patterns of channel in alluvial rivers. Flow in rivers constitutes to be the meandering or the braided form and rarely straight channel through morphologically stable patterns with mutual actions between the flowing water and bed materials. In order to develop the model for simulation of the channel migration, the channels are divided into two types with positive or negative sign by the direction of curvature radius of the centerline channel ($r_c$). That is, the single bend-channel consists of only one curvature of positive or negative sign and the multi-bend channel consists of two more curvatures of positive or negative sign, respectively. The model analyzes the sediment and flow characteristics under the influence of superelevation, spiral motion, irregularity in bed topography and depth-averaged velocity of channels. For reliability of this model, the single bend-channel and the multi bend channel are compared with experiment data in other models and the measured field data in the Keum-River, respectively. As a result, the both com parisians turn out to be excellent.