• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.118-127
• /
• 1997

In this study, We use microstep control to reduce vibration of step motor. Microstep control of step motor is usually thought of as an extension of conventional step motor control technology. The essence of micro stepping is that we divide the full step of a step motor into a number of substep called microstep and cause the stepmotor to move through a substep per input pulse. In ideal case, by controlling the individual phase currents of a two-phase step motor sinusoidally we can get uniform torque and step angle. But due to the nonlinear characteristics of the step motor, we need to compensate current waveform to improve the over-all smoothness of the conventional micro stepping system. We implement digital Pulse Width Modul- ation (PWM) driver to drive step motor and microphone was used for detecting vibration. Driver enables speed change automatically by increasing or decreasing micro stepping ratio which we call Automatic Switching on the Fly. To compensate the torque harmonics, neural network is applied to the system and we found compensated optimal input current waveform. Finally we can get smooth motion of step motor in a wide range of motor speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2261-2269
• /
• 2017

The current LTE network system provides service by locally allocating eNodeB to the EPC(Evolved Packet Core). However, it is not suitable for inter-node communication based on the distributed network environment. In this paper, we propose an integrated system by configuring E-UTRAN and EPC as All-In-One type to enable service in each distributed node. M2M UE is mounted on a each node for wireless In-band backhaul link. The integrated node provides inter-node communication over the wireless in-band backhaul link. If a normal UE moves and an access node changes in the system all entities of LTE integrated into one, it is necessary to change the P-GW which is IP anchor. In order to support the inter-node mobility even if P-GW is changed, We defined UPFE(User Packet Forwarding Extension) scheme and implemented the handover procedure of EPC. Also, we analyze the cell range of the integrated LTE system with the addition of the node and compare the handover delay with the current system.

• Clinics in Shoulder and Elbow
• /
• v.23 no.4
• /
• pp.183-189
• /
• 2020

Background: The purpose of the current study was to investigate short- to mid-term outcomes and complications following radial head replacement (RHR) for complex radial head fractures and to identify factors associated with clinical outcomes. Methods: Twenty-four patients with complex radial head fractures were treated by RHR. The mean age of the patients was 49.8 years (range, 19-73 years). Clinical and radiographic outcomes were evaluated for a mean follow-up period of 58.9 months (range, 27-163 months) using the visual analog scale (VAS) score for pain, the Mayo elbow performance score (MEPS), the quick disabilities of the arm, shoulder and hand (Quick-DASH) score, and serial plain radiographs. Complications were also evaluated. Results: At the final follow-up, the mean VAS score, MEPS, and Quick-DASH score were 0.6±1.1, 88.7±11.5, and 19.4±7.8, respectively. The mean range of motion was 132.7° of flexion, 4.7° of extension, 76.2° of pronation, and 77.5° of supination. Periprosthetic lucency was observed in six patients (25%). Heterotopic ossification was observed in four patients (16.7%). Arthritic change of the elbow joint developed in seven patients (29.2%). Capitellar wear was found in five patients (20.8%). Arthritic change of the elbow joint was significantly correlated with MEPS (P=0.047). Four cases of complications (16.6%) were observed, including two cases of major complications (one stiffness with heterotopic ossification and progressive ulnar neuropathy and one stiffness) and two cases of minor complications (two transient ulnar neuropathy). Conclusions: RHR for the treatment of complex radial head fractures yielded satisfactory short- to mid-term clinical outcomes, though radiographic complications were relatively high.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.24-29
• /
• 2008

Aircraft fuel efficiency is one of main concerns to aircraft manufacturers and to aviation companies because jet fuel price has tripled in last ten years. One of simple and effective methods to increase fuel efficiency is to reduce aircraft induced drag by using of wingtip devices. Induced drag is closely related to the circulation distribution, which produces strong wingtip vortex behind the tip of a finite wing. Wingtip devices including winglets can be successfully applied to reduce induced drag by wingtip vortex mitigation. Winglet design, however, is very complicated process and has to consider many parameters including installation position, height, taper ratio, sweepback, airfoil, toe-out angle and cant angle of winglets. In current research, different shapes of winglets are compared in the view of vortex mitigation. Appropriately designed winglets are proved to mitigate wingtip vortex and to increase lift to drag ratio. Also, the results show that winglets are more efficient than wingtip extension. That is the reason B-747-400 and B-737-800 chose winglets instead of a span increase to increase payload and range. Drag polar comparison chart is presented to show that minimum drag is increased by viscous drag of winglet, but at high lift, total drag is reduced by induced drag decrease. So, winglets are more efficient for aircraft that cruises at a high lift condition, which generates very strong wingtip vortex.

• Annals of Surgical Treatment and Research
• /
• v.95 no.6
• /
• pp.324-332
• /
• 2018

Purpose: We present our experience involving the management of this disease, identifying prognostic factors affecting treatment outcomes. Methods: The patients treated for Fournier gangrene at our institution were retrospectively reviewed. Data collected included demographics, extent of soft tissue necrosis, predisposing factors, etiological factors, laboratory values, and treatment outcomes. The severity index and score were calculated. Multivariate regression analysis was used to determine the association between potential predictors and clinical outcomes. Results: A total of 41 patients (male:female = 33:8) were studied. The mean age was 54.4 years (range, 24-79 years). The most common predisposing factor was diabetes mellitus (n = 19, 46.3%). Sixteen patients (39.0%) were current smokers. Seven patients had chronic kidney disease. The most frequent etiology was urogenital lesion (41.5%). The mortality rate was 22.0% (n = 9). Multivariate regression analyses showed that extension of necrosis beyond perineal/inguinal area and pre-existing chronic kidney disease were significant and independent predictors of mortality. Extension of necrosis beyond perineal/inguinal area was a significant predictor of increased duration in the intensive care unit and hospital stay. In addition, pre-existing chronic kidney disease was a significant predictor of flap reconstruction in the wound. Conclusion: Fournier gangrene with extensive soft tissue necrosis and pre-existing chronic kidney disease was associated with poor prognosis and complexity of patient management. Early recognition of dissemination and premorbid renal function is essential to reduce mortality and establish a management plan for this disease.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.42.1-42.1
• /
• 2015

Accurately estimating black hole (BH) masses at high redshifts is imperative in the current and future era of large-area extragalactic spectroscopic surveys. We present an extension of existing comparisons between rest-frame UV and optical virial BH mass estimators to intermediate redshifts, lower luminosities, and lower BH masses, comparable to the local $H{\beta}$ reverberation-mapping sample. We use data from the AGES survey and also newly acquired near-infrared spectra from the FMOS instrument on Subaru telescope for 89 broad-lined active galaxies at redshifts between 0.5 and 1.6. We focus on the MgII, CIV, and CIII broad emission lines and compare them to both $H{\alpha}$ and $H{\beta}$, using two different prescriptions to describe their emission profile width. We confirm that MgII shows a tight correlation with $H{\alpha}$, with a scatter of ~0.25 dex. The CIV and CIII estimators can be considered viable virial mass estimators, despite large scatter values. We combine our dataset with previous high redshift and high luminosity CIV and CIII measurements from the literature and we calculate a scatter of $\sim0.4$ dex and an offset to the 1:1 relation consistent with 0 for the combined sample. This updated comparison spans a total of 4 decades in BH mass, a much wider range than any previous individual study.

• IE interfaces
• /
• v.25 no.1
• /
• pp.31-39
• /
• 2012

Discovering the suppliers capable of manufacturing the parts that satisfy buyer requirements via current online market places remains difficult due to semantic differences between what the suppliers can produce and what the buyer wants to acquire. One of the promising approaches to overcome the semantic difference is to adopt an ontology to describe the suppliers' manufacturing capabilities and the buyer requirements that range widely from manufacturing costs to eco-friendly design. Such an ontology dedicated to supplier discovery has yet to be developed. MSDL(Manufacturing Service Description Language) provides the basis for defining terms and their relationships in the ontology. Thus, the objective of this paper is to extend MSDL into a new ontology suitable for supplier discovery in mold manufacturing industry. In addition, a new ontology development method for supplier discovery will be proposed. Finally prototype demonstrations are provided to show a feasibility of the proposed ontology in mold manufacturing domains.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.227-230
• /
• 2003

In this paper, a full bridge edge-resonant zero voltage mode based soft-switching PWM DC-DC power converter with a high frequency center tapped transformer link stage is presented from a practical point of view. The power MOSFETS operating as synchronous rectifier devices are implemented in the rectifier center tapped stage to reduce conduction power losses and also to extend the transformer primary side power MOSFETS ZVS commutation area from the rated to zero-load without a requirement of a magnetizing current. The steady-state operation of this phase-shift PWM controlled power converter is described in comparison with a conventional ZVS phase-shift PWM DC-DC converter using the diodes rectifier. Moreover, the experimental results of the switching power losses analysis are evaluated and discussed in this paper. The practical effectiveness of the ZVS phase-shift PWM DC-DC power converter treated here is actually proved by using 2.5kW-32kHz breadboard circuit. An actual efficiency of this converter is estimated in experiment and is achieved as 97$\%$ at maximum.

• Korean Journal of Ichthyology
• /
• v.12 no.1
• /
• pp.20-24
• /
• 2000

The blenniid fish, Istiblennius dussumieri (Valenciennes) was reported on the basis of six specimens collected from rocky shores on the Yokonami Peninsula, Kochi Prefecture, southern Japan. This species was characterized by wavy, dusky stripes on its dorsal fin, 14 pectoral fin rays, 38 to 42 vertebrae, branched supraorbital cirrus, finger-like nasal cirrus, seven to ten vertical, dark bands on the body and canines absent on both jaws. Although the occurrence of this species may be due to larval transport by the Kuroshio Current, this is the first record of I. dussumieri from Japan represents a remarkable northern range extension of the species in the western Pacific Ocean.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.1-11
• /
• 2005

The changes of cosmetic industry regulation in the leading countries, such as E.C., America, Japan, initiated our research to suggest the direction of our cosmetics regulation. These countries are strengthening the post-monitoring system for the safety and cosmetic industry development. We propose the agenda for the development of the industry; the extension of cosmetics range, deregulation of the advertisement, implementation of the ingredient labelling, introduction of the product expiring date. Ultimately. it is necessary to introduce and extend current CGMP to enhance the company responsibility and to reinforce the post-monitoring.