• KIEAE Journal
• /
• v.10 no.4
• /
• pp.45-50
• /
• 2010

This study for middle school facilities is second following the study of the energy consumption of primary school facilities. There is not on the analysis of the current energy usage for middle school facilities in nations to set goals of energy reduction. Therefore, The purpose of this study is to present various analysis result of energy consumption which is a statistical analysis of domestic middle school facilities in South Korea. As a consequence, each average energy consumption at the domestic middle school facilities analyzed as following after changing as unit 'kWh' only for comparison with every energy source. It represents that the energy consumption of electric power was 183.7MWh(70.2%), gas consumption for heating was 46.5MWh(17.8%), oil consumption was 26.5MWh(10.1%), district energy was 5.1MWh(1.9%). This result describes that consumption of electric power was large greatly and it reflects the expectation that it will climb the demand regarding this energy in the future. In additionally, it analyzed average energy consumption with $74.4kWh/m^2$ by the unit area of air-conditioning and the district which has large energy consumption was Seoul with $91.6kWh/m^2$.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.261-268
• /
• 2022

In this study, electrochemical treatment of urban wastewater with electrical conductivity of 1000 μS cm^-1 and chemical oxygen demand of 250 mg L^-1 was investigated using the variables of initial pH value, current density and flow rate. Electrocoagulation was used, in which aluminum and stainless steel were selected, as the electrochemical treatment process. The electrocoagulation process was operated in continuous mode. The data obtained in experimental studies show that the best COD removal efficiency occurred in experiments where the initial pH value was 6. The increase in current density from 5 A to 15 A decreased the removal efficiency from 79 to 67%. The increase in flow rate under constant current density also reduced the efficiency of removal as expected. In experiments in which current density and flow rate were examined together, the increase in flow rate allowed the application of higher current densities. This situation led to considerable reductions in energy consumption values, even if the COD removal efficiency did not significantly increase. The high COD removal obtained with the use of high flow rate and high current density indicates that the electrocoagulation process can be used for high flow rate municipal wastewater treatment.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2011

A new power control algorithm for wireless communication which can be applied to various near distance communications and USN/RFID systems is proposed. This technique has been applied and tested to lithium coin battery operated UHF/microwave transceiver systems to show extremely long communication life time without battery exchange. The power control algorithm is based on the dynamic prediction method of arrival time for incoming packet at the receiver. We obtain 16mA current consumption in the TX module and 20mA current consumption in the RX module. The advantage provided by this method compared to others is that both master transceiver and slave transceiver can be low power consumption system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.686-689
• /
• 2003

This paper describes two kind of new concept for low power consumption for small area TFT-LCDs. First, the proposed analog buffer could reduce the static current by adopting new scheme. Second, new data driver structure reduced DC power consumption by reducing the number of operational amplifier (op-amp). As simulation results of Hspice, the quiescent current of proposed analog buffer is less than $0.8{\mu}A$ and the DC power consumption is reduced about $40{\sim}50%$ compared with conventional ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1027-1035
• /
• 2014

The most important design factor for portable devices is power consumption. In this paper, in the early design stage of a mobile device which measures temperature and humidity a power consumption model will be proposed and then the overall power consumption will be estimated based on this model. We will verify previously the correctness of such estimated power consumption before implementation of the real device. That is our proposed design methodology based on power consumption model. An improved design method for efficiently reducing the current consumption in the idle mode is also presented. By implementing a real prototype of the mobile device for measuring temperature and humidity, the correctness of our proposed design methodology based on power consumption modeling will be verified.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.24-33
• /
• 2022

This study analyzed and derived a plan to reduce fuel consumption of domestic aircraft. Specifically, this study tested fuel consumption in the short-distance flights of B737. Fuel consumption was calculated by substituting the simulation variable values into Matlab. The strength of this study is that the actual operating environment was reflected by collecting the B737 flight data. As a result of the study, the domestic fuel consumption rate in the computed flight plan was less than the current fuel consumption rate. Existing limitations of this study is that it was difficult to reflect the various variables constituting the flight environment, and thus there can be errors in the measurement of the fuel consumption. There are two major expected applications from this study. First, applying the plans from this study will lead to a reduction in the amount of fuel and thus provide positive economic effects for commercial airlines. Second, the plan from this study will provide a basis for pilots to predict fuel consumption more accurately. In conclusion, this study proposes a fuel saving plan with useful applications for pilots and airlines.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.1
• /
• pp.48-58
• /
• 2014

Energy efficiency is vital to improve energy security, environmental and social sustainability, and economic performance. Improved energy efficiency also mitigates climate change by lowering greenhouse gas (GHG) emissions. Buildings are the single largest industrial consumer of energy and are therefore key to understanding and analyzing energy consumption patterns and the opportunities for saving energy at the district level in urban environments. This study focused on two representative boroughs in the major metropolitan area of Seoul, South Korea as a case study: Gandong-gu, a typical residential district, and Jung-gu, a typical commercial district. The sources of the energy supplied to the boroughs were determined and consumption patterns in different industry sectors in Seoul used to identify current patterns of energy consumption. The study analyzed the energy consumption patterns for five different building categories and four different sectors in the building using a bottom-up energy modeling approach. Electricity and gas consumption patterns were recorded for different building categories and monthly ambient temperatures in the two boroughs. Finally, a logarithmic equation was developed to describe the correlation between commercial activity and cooling energy intensity in Jung-gu, the commercial district. Based on these results, recommendations are made regarding the current energy consumption patterns at the district level and government energy policies are suggested to reduce energy consumption and, hence, greenhouse gas emissions, in both commercial and residential buildings.

• Journal of the Korean Society of Costume
• /
• v.65 no.4
• /
• pp.45-60
• /
• 2015

Emotional consumption value orientation has played a significant role to have a direct effect on making purchase in our lives. And emotional value has been dealt within the SPA brand contexts recently. Therefore, the current study investigates how SPA brand consumers' emotional value consumption orientation has affected brand loyalty, with a focus on mediation effects of marketing mix attributes assessment. Results of this research are as follows. First, there was a significant difference between Zara and Uniqlo on the assessment of marketing mix attributes. Second, emotional consumption value orientation had significantly impact on brand loyalty for both Zara and Uniqlo. Third, multi-regression analysis was conducted to find out the mediation effect of marketing mix attributes assessment in the relationships between emotional consumption value orientation and brand loyalty. For Zara, hedonic promotional and pricing attributes of products and place show full mediation effect on brand loyalty. For Uniqlo, utilitarian, hedonic and pricing attributes have impact on brand loyalty. The current study strives to find out how emotional consumption value orientation attected the consumer evaluation process and purchase behavior in the contexts of SPA brand product purchase. Product assessments have stronger effect than place, and hedonic attributes have stronger effect on brand loyalty in comparison with utilitarian attributes. Also, hedonic attributes of product and place have stronger effect on brand loyalty in comparison with utilitarian attributes.

• Journal of the Korean Home Economics Association
• /
• v.40 no.2
• /
• pp.39-56
• /
• 2002

The purpose of this study was to review criticallu the current slates of researches in the area of consumer culture and to suggest several ways in which it can be improved. After analyzing 87 articles in major journals which have published during the 1980s, 1990s, the major findings are as follows: First, the articles in this field has increased sharply in latter half of 1990s. Second, the subjects of these researches can be divided into three. They are general consumption culture(including consumption value), abnormal consumer behavior(including overconsumption, addictive buying and conspicuous consumption) and pro-environmental consumer behavior. Third, the adolescents is most frequently researched. Fourth, same as other areas the major methodology is positivistic one which focuses the survey analysis to investigate the relationships of many variables. Implications are also discussed with respect to future research.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.263-266
• /
• 2004

An experimental study was carried out on the recovery of ammonium lactate from simulated fermentation brothby desalting electrodialysis (DSED). All experiments, using AM-1 and CM-1 membranes, were operated in a constant current and a subsequent constant-voltage mode, and the switching point was determined based on the previous results. The effects of operating conditions such as operating current, initial feed concentration, and initial feed pH were investigated. Increased operating current resulted in a decreased operating time but an increased energy consumption per unit amount of ammonium lactate recovered. As the initial feed concentration was increased, the operating time increased while energy consumption decreased. The operating time and energy consumption slightly decreased as the initial feed pH was increased up to 6.0. However, no significant influences on the recovery of ammonium lactate were observed over 6.0. The rejections of acetate, glucose, and proteins were $10\%,\;93\%,\;and\;98\%$, respectively. Sulfate was not rejected at all.