• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.49-54
• /
• 2015

Dynamically vulcanized PMMA/ACM (80 wt%/20 wt%) blend using DCP as a curing agent was prepared using internal mixer. The morphology, mechanical properties, optical properties, melt viscosity and die swell were characterized by using FE-SEM, tensile test, Izod impact test, dynamic mechanical analysis, ARES and capillary rheometer, respectively. The blends show a phase-separated morphology in which ACM are dispersed in PMMA matrix. Dynamically vulcanized blend exhibits higher mechanical properties, higher melt viscosity, and die swell as compared to simple blend. And, the dynamically vulcanized blend showed total transmittance of more than 75% and haze of higher than 90%, which enable it to find potential applications to fabricate an optical diffuser by extrusion process.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.581-585
• /
• 2005

The antimicrobial activity of partially purified enterocin K25, produced by Enterococcus sp. K25, was abolished by proteases such as pepsin and proteinase K. The bacteriocin was resistant to heat treatment at $75^{\circ}C$ for 15 min and lost 75% of its activity at $100^{\circ}C$ for 30 min. Enterocin K25 showed bactericidal mode of action against an indicator strain, Lactobacillus plantarum NCDO 955. Enterocin K25 was purified to 112.6-fold purity via conventional steps of ammonium sulfate precipitation, ion exchange chromatography, and reversed phase high performance liquid chromatography (RP-HPLC). The molecular mass of the purified enterocin K25 was estimated as 4.3 kDa on an electrophoresis gel. Plasmid (${\sim}6.5\;kb$) linkage of production of enterocin K25 was confirmed by plasmid curing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.50-51
• /
• 2015

In marine and coastal environments, penetration of chloride ions is one of the main mechanisms causing concrete reinforcement corrosion. Currently, most of experimental investigations about submerged penetration of chloride ions are started after the four weeks standard curing of concrete. The further hydration of cement and reduction of chloride diffusivity during submerged penetration period are ignored. To overcome this weak point, this paper presents a numerical procedure to analyze simultaneously cement hydration reaction and chloride ion penetration process. First, using a cement hydration model, degree of hydration and phase volume fractions of hardening concrete are determined. Second, the dependences of chloride diffusivity and chloride binding capacity on age of concrete are clarified. Third, chloride profiles in hardening concrete are calculated. The proposed numerical procedure is verified by using chloride penetration test results of concrete with different mixing proportions.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.113-124
• /
• 2000

It is well known that the characteristics of liquid crystal polymer composite(LCPC) films are possessed of large-area and flexible display, polarizer free, high contrast, wide angle of visual filed and high responsiveness. In this study, we have investigated to the best optimal mixing rates chiral nematic liquid crystals and UV-curable resins having different properties acrylate moleculars. The purpose of this study has been the development of new functional application with liquid crystal polymer composite films. For example the films were applied a new thermal sensor. In results, best phase separation behaviors turned out liquid crystal/monomer/oilgomer mixture system.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.337-341
• /
• 2016

Cu-30 vol% SiC composites with relatively densified microstructure and a sound interface between the Cu and SiC phases were obtained by pressureless sintering of PCS-coated SiC and Cu powders. The coated SiC powders were prepared by thermal curing and pyrolysis of PCS. Thermal curing at $200^{\circ}C$ was performed to fabricate infusible materials prior to pyrolysis. The cured powders were heated treated up to $1600^{\circ}C$ for the pyrolysis process and for the formation of SiC crystals on the surface of the SiC powders. XRD analysis revealed that the main peaks corresponded to the ${\alpha}$-SiC phase; peaks for ${\beta}$-SiC were newly appeared. The formation of ${\beta}$-SiC is explained by the transformation of thermally-cured PCS on the surface of the initial ${\alpha}$-SiC powders. Using powder mixtures of coated SiC powder, hydrogen-reduced Cu-nitrate, and elemental Cu powders, Cu-SiC composites were fabricated by pressureless sintering at $1000^{\circ}C$. Microstructural observation for the sintered composites showed that the powder mixture of PCS-coated SiC and Cu exhibited a relatively dense and homogeneous microstructure. Conversely, large pores and separated interfaces between Cu and SiC were observed in the sintered composite using uncoated SiC powders. These results suggest that Cu-SiC composites with sound microstructure can be prepared using a PCS coated SiC powder mixture.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.63-70
• /
• 2007

Objectives : Atopic dermatitis is a recurrent or chronic eczematous skin disease with severe pruritus. Although the pathogenic mechanisms of atopic dermatitis are yet unknown, recently hyperresponsive Th2 cells in the acute phase are reported as the important mechanisms. Cheonggisan(CGS) is used in oriental clinics for curing acute skin lesions of eczema, atopic dermatitis or urticaria. There have been no studies on the therapeutic mechanism of CGS for curing atopic dermatitis. We aimed to find out the therapeutic mechanism of CGS on atopic dermatitis, so we observed Th2 cell differentiation in EL 4 cells and $NF-kB$ p65 activation in RAW 264.7 cells. Materials and Methods : EL 4 cells were induced the increase of IL-4 mRNA expression by phorbol-12-myristate-13-acetate(PMA) and 4-tert-Octylphenol(OP) and treated with CGS extract. RAW 264.7 cells were induced the increase of cyclooxygenase(COX)-2 mRNA expression by lipopolysaccharide(LPS) and treated with CGS extract. Results : The PMA and OP induced IL-4 mRNA expression was dose-dependantly decreased in CGS treated EL 4 cells. The LPS-induced COX-2 mRNA expression was dose-dependantly decreased in CGS treated RAW 264.7 cells. Conclusion : The results may suggest that the CGS inhibits Th2 cell differentiation in EL 4 cells and inhibits $NF-kB$ p65 activation in RAW 264.7 cells.

• Composites Research
• /
• v.16 no.2
• /
• pp.62-67
• /
• 2003

Interfacial properties and damage sensing for the carbon fiber/epoxy-amine terminated (AT)-polyetherimide (PEI) composite were performed using microdroplet test and electrical resistance measurements. As AT-PEI content increased, the fracture toughness of epoxy-AT-PEI matrix increased, and interfacial shear strength (IFSS) increased due to the improved fracture toughness by energy absorption mechanisms of AT-PEI phase. The microdroplet in the carbon fiber/neat epoxy composite showed brittle microfailure mode. At 15 phr AT-PEI content ductile microfailure mode appeared because of improved fracture toughness. After curing, the change in electrical resistance $\Delta\textrm{R}$) with increasing AT-PEI content increased gradually because of thermal shrinkage. Under cyclic stress, in the neat epoxy case the reaching time until same stress was faster and their slope was higher than those of 15 phr AT-PEI. The result obtained from electrical resistance measurements under curing process and reversible stress/strain was correspondence well with matrix toughness properties.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.72-81
• /
• 2014

The main mineral phases of natural hydraulic lime (NHL) as a hydraulic lime binderare $Ca(OH)_2$, $C_2S$, $C_3S$, $C_3A$, and $SiO_2$ residues. Also, NHL has the characteristic of setting and hardening by a hydration reaction with water and by carbonation reactions with carbon dioxide from the air. In this study, in an effort to investigate changes of the mineral phases by NHL hydration and carbonation reactions, transitions of mineral phases and the microstructures of hardened pastes were analyzed by XRD, DSC, SEM, and by pore size distributions using domestic and foreign-sourced NHL pastes after curing at 1, 3, 7, and 28 days. On the basis of the analysis results, it was confirmed that domestic low-grade limestone can be used for the manufacturing of NHL. The main hydration mineral phases were $Ca(OH)_2$, $CaCO_3$, $C_2S$, and $SiO_2$ residues, while in the case of foreign-sourced NHL, a small amount of an aluminium hydration phase formed. Also, the $CaCO_3$ content after the carbonation reaction increased with an increase in the curing time. After hydration for 28 days, NHL containing considerable amounts of $C_2S$ and $C_3S$ showed higher carbonation ratios than others types.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.203-208
• /
• 1999

The ion-pair high performance liquid chromatographic elution behavior of salicylic acid and its derivatives was studied with measuring capacity factor, k', changing the concentration of ion-pairing reagent (tetrabutylammonium chloride, TBACl) in mobile phase. As a result, it was found that k' of the samples increase at pH 7.2 as the TBACl concentration increases. The derivatives of salicylic acid were separated each other at an optimum mobile phase condition which was found from the observation of the retention behavior. The optimum mobile phase condition was methanol solution($MeOH:H_2O_2$ 30:70) containing 20 mM TBACl for the determination of salicylic acid and methanol solution($MeOH:H_2O_2$ 20:80) containing 40 mM TBACl for p-aminosalicylic acid at pH 7.2. The method has been applied for the analysis of the contents of salicylic acid derivatives in an aspirin tablet and a tuberculosis curing agent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.101-104
• /
• 1998

We report some methods for measuring a LiNbO$_3$ optical phase modulator bandwidth. Since Mach-Zehnder waveguide type, one of methods for modulation bandwidth measurement, is comparatively simple and useful, it was adapted in this work. In order to confirm this method, the waveguide of single and Mach-Zehnder type were fabricated on the same wafer. The Mach-Zehnder interferometric waveguide and the single channel waveguide were used for the measurement of the phase modulator's driving voltage and bandwidth for device fabrications, respectively. Ti-860$\AA$ in-diffusion was achieved in a wet-bubbling oxygen environment at 105$0^{\circ}C$/8hours. LINbO$_3$ internal chips were pigtailed to PMF(polarization maintaining fiber)/SMF(single mode fiber) using an epoxy curing technique. Examined were optical properties such as an insertion loss, propagation loss and mode size, and the loss mechanism of optical coupling between an optical fiber and a waveguide was considered.