• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2003

This Paper concerns the compressive strength development tendencies of concrete according to their Ages and curing conditions. The test results are on follows; (1) The compressive strength development of concrete appears larger according to the curing conditions under water curing, condition structural curing and field curing conditions. (2) The compressive strength development rate of concrete after 28 days' curing becomes smaller, but the case of lower strength of concrete not.

• 한국연초학회지
• /
• 제18권1호
• /
• pp.49-53
• /
• 1996

This experiment was carried out to study the effect of oxygen on chemical composition and physical properties of tobacco leaves during flue-curing. The results obtained were as follows: Starch content decreased and sucrose content increased with increasing oxygen supply during curing. Glucose and fructose of the cured leaves showed high content at the 5-10% oxygen supply. Amino-N and nitrate-N increased with increasing oxygen supply. Total nitrogen and NH4-N showed the lowest value at the 5-10% and 10-15% oxygen supply in the cutters and leaf, respectively. Chlorophyll and chlorogenic acid increased, and total volatile base decreased with increasing oxygen supply. The activity of α-amylase increased at the latter period of flue-curing, and the maximum activity point were delayed 12 hours with increasing oxygen supply. Shatter index of cured leaves decreased with increasing oxygen supply. It was desirable to supply oxygen during flue-curing for the improvement of chemical and physical properties such as starch, total sugar, chlorogenic acid, and shatter index of cured leaves.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.353-356
• /
• 2002

In this study, the clay samples collected in the area Mokpo carry out laboratory soil test. Under three different curing $temperature-20^{\circ}C,\;50^{\circ}C,\;80^{\circ}C$ and 4 terms of curing day -1day, 7days, 14days, 40days for each, the remolded and reconsolidated samples had been made. To find out an aging effects and geotechnical characteristics between undisturbed samples and reconsolidated samples, laboratory tests were preformed. In the results, it was found that mechanical properties of undisturbed natural samples were similar to high temperature reconsolidation clay. The curing temperature influence on simulating aging effect more than the curing day does and the best curing condition are $80^{\circ}C$, 27days.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• 한국추진공학회지
• /
• 제26권6호
• /
• pp.28-33
• /
• 2022

본 연구에서는 일반적으로 사용하는 Hydroxyl terminated polybutadiene(HTPB)계 고체 추진제의 경화 온도와 당량비 변경에 따른 경화 특성을 고찰하였다. 또한, Triphenyl bismuth(TPB), Maleic anhydride(MA) 그리고 Magnesium oxide(MgO) 촉매 시스템에서 이들의 비율 및 함량에 따른 경화 반응 영향도 확인하였다. 마지막으로 추진제 혼화 시 각 공정 별 수분을 투입하여 수분이 추진제 경화에 끼치는 영향을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.77-78
• /
• 2017

In this study, the effect of insulation curing for mass concrete wall according to thickness and curing period was evaluated by thermal analysis.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.7-14
• /
• 2003

본 연구는 광양만 지역과 목포 남악지역의 점토를 이용하여 양생온도를 20$\times$, 50$\times$ , 80$\times$로 달리하고 각각의 온도에서 양생기간을 1일, 7일 14일, 40일로 하여 재성형.재압밀 시료를 제작하여 양생온도.양생기간이 연대효과 재현에 어떤 영향이 있는지를 밝히고, 불교란시료와 재압밀된 점토의 역학적 특성과 연대효과의 특성을 알아보기 위하여 1축압축시험, 3축압축시험 그리고 표준압밀시험을 실시하였다. 그 결과 압축지수비는 원지반점토의 연대효과를 나타내는데 유용한 지수임을 확인할 수 있었으며 또한 고온으로 양생한 점토가 연대효과를 잘 표현하고 연대효과의 재현에 필요한 최적의 양생온도는 80$\times$ 정도 부근이고 양생기간은 27일정도 임을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.130-135
• /
• 2002

This study investigates the effect of curing method on the bonding strength of aluminum/CFRP composites. The surface of aluminum panel was treated by DC plasma. Lap shear tests and T-peel tests were performed based on the procedure of ASTM 906-94a and ASTMD1876-95, respectively. Test samples were fabricated by using the co-curing method and the secondary curing method. The results showed that the shear strength of test samples made by the co-curing method was 2.5 times greater than that of test samples made by the secondary curing method. The T-peel strength of the co-curing method case was almost 2 times greater than that of the secondary curing method case.

• Advances in concrete construction
• /
• 제6권1호
• /
• pp.69-85
• /
• 2018

In order to provide sufficient stability and resistance against bleeding and segregation during transportation and placing, mineral admixtures are often used in self-compacting concrete mixes (SCC). These fine materials also contribute to reducing the construction cost and the consumption of natural resources. Many studies have confirmed the benefits of these mineral admixtures on properties of SCC in standard curing conditions. However, there are few published reports regarding their effects at elevated curing temperatures. The main objective of this study is to investigate the effect of three different mineral admixtures namely limestone powder (LP), granulated blast furnace slag (GS) and natural pozzolana (PZ) on mechanical properties and porosity of SCC when exposed to different curing temperatures (20, 40, 60 and $80^{\circ}C$). The level of substitution of cement by mineral admixture was fixed at 15%. The results showed that increasing curing temperature causes an improvement in performance at an early age without penalizing its long-term properties. However the temperature of $40^{\circ}C$ is considered the optimal curing temperature to make economical and high performance SCC. On the other hand, GS is the most suitable mineral admixture for SCC under elevated curing temperature.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.11-18
• /
• 2017

PURPOSES : This study investigates the effect on concrete pavement accordance with the curing methods in cool weather and supports the best method in the field. METHODS : Two field tests evaluated the curing methods of concrete pavement in cool weather. Firstly, five curing methods were tested, including normal curing compound, black curing compound, bubble sheet, curing mat, and curing mat covered with vinyl. Concrete maturity was compared from temperature data. Secondly, normal curing compound and curing mat with vinyl, which showed the best performance, were compared in terms of maturity and join condition index. RESULTS:From the field tests, it is an evident that curing mat with vinyl accelerated the concrete strength. Therefore, it is possible to conduct saw-cut works in cool weather, which minimizes damage on concrete at joint. CONCLUSIONS : For concrete pavement in cool weather, using curing mat with vinyl as the curing method could overcome the strength delay. Therefore, strength and durability problems on concrete at joint due to cool weather would be fewer in the future.