• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

Novel synthetic routes were proposed for hydroxy-terminated Poly(EO-co-THF) by Cationic ring-opening copolymerization of Tetrahydrofuran(THF) and Ethylene oxide(EO). It was carried out using Boron trfluoride tetrahydrofuranate($BF_3$ THF complex) as catalyst in the presence of 1,4-butandiol. The resultant products are well-defined linear polyetherpolyol. Polyurethane(TPU) were prepared using resultant polyetherpolyol with IPDI/N-100 as curing agent and TPB(Triphenylbismuth) /MA(Maleic anhydride) mixture as cure catalyst. Mechanical properties of TPU prepared from poly(EO-co-THF) polyol were investigated and compared with polyurethane using ATK HTPE.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.583-586
• /
• 2005

Strength of concrete is very important factor in design and quality management and may represent overall quality of concrete. Such strength of concrete may differ depending on amount of cement mixed, water and fine aggregate ratio. Classic concrete products have been produced mainly with ordinary portland cement(hereinafter 'cement'), water and fine aggregate as shown above, but various additives and mixture materials have been used for concrete manufacturing, along with development of high functional concrete and diversification of structures. Various kinds of chemical mixtures agents and mixture materials have been used as it requires concretes with other features which cannot be solved with existing materials only, such as high strength, high flexibility and no-separation in the water. Such addition of various mixture agents may cause change in cement hydrate, affecting strength. Hydration of cement is the process of producing potassium hydroxide, C-S-H, C-A-H and Ettringite, while causing heat generation reaction after it is mixed with water, and generation amounts of such hydrates play lots of roles in condensation and hardening. This study aims to analyze its strength and features with hydrates by making specimen according to curing temperature, types of mixture agent, mixing ratio and ages and by analyzing such hydrates in order to analyze role of cement hydrate on early strength of concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.49-52
• /
• 2006

Extrusion concrete panel is made by extrusion of high viscosity paste. The high viscosity paste is made by mix of cement, silica, reinforced fiber and thickening agent in the dry mixer and wet mixer subsequently, extrusion in the extruder, and curing in the normal steam curer and high pressure steam curer subsequently. To increase a flexural strength of the panel, it is used inorganic fiber as like asbestos. But it was known that the asbestos was harmful to human being lately, in the domestic area it is restricted usage in the construction materials. So, it is demanded the alternative material for asbestos in the extrusion concrete panel. This study is to investigate that the sepiolite is possible to be the alternative of asbestos. The 3 types of sepiolite is applied to the extrusion concrete panel. To investigate the properties of the panel with sepiolite, it is compared the control with asbestos in the flexural strength, the specific density and the spot compressive strength. From the test results, it was found that the panel with sepiolite B is higher than the control with asbestos in the flexural strength and in the density.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.140-146
• /
• 2014

This study investigated the engineering characteristics of non-sintering binder-stabilized mixtures consisting of different ratios of a hardening agent(3%, 6%, 9%, 12%) for recycling industrial by-products through several series of laboratory tests. The hardening agents consisted of two kinds of non-sintering binders(NSB-1, NSB-2), which were developed by using inter-chemical reactions among blast furnace slag, phospho-gypsum, and an alkali activator. In addition, ordinary Portland cement(OPC) was used to compare the engineering characteristics of the stabilized mixture. An unconfined compressive test showed that the unconfined compressive strength increased with the curing time and mixing ratio. Experimental test results indicated that the 7-day strength of the NSB-1 mixture was similar to that of the OPC mixture. However, its 28-day strength was higher than that of the OPC mixture. The secant module of elasticity showed a range of $E_{50}=(42-109)q_u$ regardless of the agents. Based on the results of triaxial tests, the cohesion and friction angle increased with the mixing ratio.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.265-268
• /
• 2002

In this work, the blend system of epoxy and PMR-15 polyimide is investigated in terms of the cure behaviors and thermal stabilities. The cure behaviors are studied in DSC measurements and thermal stabilities are also carried out by TGA analysis. DDM (4, 4'-diamino diphenyl methane) is used as curing agent for EP and the content of PMR-15 is varied within 0, 5, 10, 35, and 20 phr to neat EP. As a result, the cure activation energy ($E_a$) is increased at 10 phr of PMR-15, compared with that of neat EP. From the TGA results of EP/PMR-15 blend system, the thermal stabilities based in the initial decomposed temperature (IDT) and integral procedural decomposition temperature (IPDT) are increased with increasing the PMR-15 content. The fracture toughness, measured in the context of critical stress intensity factor ($K_{IC}$) and critical strain energy release rate ($G_{IC}$), shows a similar behavior with $E_a$. This result is probably due to the crosslinking developed by the interactions between intermolecules in the polymer chains.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.73-76
• /
• 1999

Near infrared spectroscopy techniques were used to study the cure reactions of epoxy resin system based on diglycidyl ether of bisphenol A(DGEBA) resins cured with 4, 4' diaminodiphenyl sulfone (DDS) hardner. Stoichiometric DGEBA/DDS resin formulation was involved in this study. The infrared absorption spectra of the prepared formulation were obtained on an FTIR spectrometer operating in the region of 11000 to 4000$cm^{-l}$. The chemical group peaks of interest in a DFEBA/DDS spectrum were identified by a comparative study with individual spectra of DGEBA and DDS monomers. Where necessary, special model compounds were used to identify unknown bands, such as the primary amine band at 4535$cm^{-l}$. The absorption bands of interest were integrated to quantify the areas and then converted to molar concentrations. This series of quantitative analyses of the major chemical groups led us to understand not only the reaction mechanism but also the cure kinetics. In this paper, the reaction mechanisms observed in stoichiometric DGEBA/DDS resin formulation and the various properties of the resin system as a function of cure temperature are described.

• Geomechanics and Engineering
• /
• v.3 no.3
• /
• pp.207-218
• /
• 2011

This article describes laboratory research done on strength evaluations for stabilized samples made of tropical fibrous peat. The stabilizing agents used were ordinary Portland cement (OPC) as binding agent and blast furnace slag (BFS) as additive. Stabilized samples were tested for their strength through unconfined compressive strength (UCS) and California bearing ratio (CBR). Different dosage rates of OPC and BFS were used in trial and error experiments for the most effective combination for stabilized peat samples that were at their natural moisture content. Stabilized trial samples were air cured for 90 days. After detecting the most effective dosage rate in the trial samples, their values were used to prepare CBR samples at their optimum moisture content (OMC). CBR samples were then air cured from 1 to 90 days and tested under un-soaked and soaked conditions. The most effective dosage rate for the stabilized peat samples was found to be close to when 75% for OPC and 25% of BFS per total weight of OPC, and BFS. As an example, if 11.25% OPC, and 3.75% BFS are mixed with peat and compacted at their OMC and air cured for 90 days, stabilized peat will have an increase in CBR of 0.8% to 45 % for un-soaked and 20% for soaked conditions.

• Korean Journal of Pharmacognosy
• /
• v.36 no.4 s.143
• /
• pp.338-343
• /
• 2005

Inflammatory mediators such as interleukin-1 (IL-1), tumor necrosis $factor-{\alpha}\;(TNF-{\alpha}),\;interferon-{\gamma}\;(IFN-{\gamma})$ and lipopolysaccharide (LPS) are thought to play major roles in joint diseases such as a rheumatoid arthritis (RA), and there is considerable evidence playing a role for these cytokines in osteoarthritis (OA). Therefore, we have studied the effects on anti-inflammation and analgesic by ethyl acetate fraction from 70% ethanol extract of Artemisia capillaries (EAC). As a positive control, apigenin, which is known as an anti-inflammatory agent as an iNOS inhibitor, was used and showed the dose-dependent inhibitory effect. EAC showed strong inhibitory efficacy against cytokine-induced proteoglycan degradation, $PGE_2$ production, nitric oxide (NO) production, and matrix-matalloproteinases (MMPs) expression in rabbit articular chondrocyte. In the writhing test induced by acetic acid, EAC $(200{\sim}400\;mg/kg)$ exhibited a dose-dependent inhibition of writhing. The results indicate that EAC have anti-inflammatory and analgesic activities, and could be a good herbal medicine candidate for curing of RA and/or OA.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.124-132
• /
• 1990

In order to improve the mechanical properties and fracture toughness of HPT 1071/DDS system, poly(aryl etherimide) (PEI) was incorporated in the resin system. In HPT 1071/DDS system, mechanical properties of cured epoxy resins were not strongly dependent on the concentration of DDS curing agent strongly. In the case of HPT 1071/DDS/PEI system, the fracture toughness and flexural properties of epoxy resins increased with increasing the concentration of PEI. SEM micrographs of cured epoxy resin indicated that the phase separation occured at the low concentration of PEI in this system. In addition, investigation of the relationship between mechanical properties and the morphology of modified epoxy resin was undertaken in HPT 1071/DDS/PEI system.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.367-372
• /
• 2004

Nitrite, a curing agent of meat products, is precursors of carcinogenic N-nitrosamines during processing of meat products or under human stomach conditions as well as having its own toxicity. Some researches have been conducted to evaluate the effects of ionizing radiation on the reduction of residual nitrite and N-nitrosamines in an aqueous model system and cured meat products with different packaging methods during storage. These results showed that the gamma irradiation was effective in reducing the residual nitrite and N-nitrosamines in an aqueous model system as well as meat products. Especially, irradiation combined with vacuum or modified atmosphere packaging was more effective in nitrite and N-nitrosamines reduction than aerobic packaging during storage. The objective of this review is to introduce the irradiation technology for the application of reducing the residual nitrite and N-nitrosamine contents in meat products.