• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.95-99
• /
• 2000

PBGA(Plastic Ball Grid Array) is composed of some materials such as PCB(Printed Circuit Board), epoxy molding compound, die attach and so on. Reliability of PBGA package is weak compared with plastic packages. The weak points of reliability are the lower resistance to popcorn cracking, which is induced by moisture absorption in PCB, and the pressure cooker test corrosion, which is the basic problem due to the material characteristics of PCB. Introducing the PCB banking and the plasma treatment cleared the popcorn cracking phenomenon. The PCB banking and plasma treatment reduced the epoxy void by eliminating the source of moisture vaporization during the epoxy curing and enhanced the adhesion between PCB and epoxy. Also, plasma treatment enhanced the wettability of epoxy on PCB. The problem of corrosion is cleared using multi-functional epoxy. This type of EMC(Epoxy Molding Compound) is recommended in package using PCB as a substrate.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.22-26
• /
• 2017

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

• 대한한의학원전학회지
• /
• 제29권3호
• /
• pp.41-56
• /
• 2016

Objectives : The paper analyzes food cure recipes related to wind diseases as written in Sikuisimgam, Eumsunjungyo Shikyojaebyeong, and Singnyochanyo. The paper shall then use results of the analysis to consider food cure recipes utilized by patients who are suffering from wind diseases or who are showing symptoms of wind diseases. The paper aims to help cure modern diseases related to wind diseases and make a set of suggestion about preventive foods. Methods : Important dietary guidebooks in Korea and China were studied, and the author studied only the ones among the food cure recipes that had wind diseases for which they are effective. Sikuisimgam 16 species, Eumsunjungyo Shikyojaebyeong 13 species, Singnyochanyo 13 species of food cure recipes related to wind diseases were extracted, and they were studied based on their ingredients, cooking style, and administration time. Results : There are food ingredients introduced as effective for curing wind diseases within Sikuisimgam, Eumsunjungyo Shikyojaebyeong, and Singnyochanyo. Among them, some of the ones that can be utilized in the modern age are: arrowroot(葛粉), nepta herb(荊芥), Baekryangmi(白粱米), Dongmaja(冬麻子), milled rice(白米), Eokiin(薏苡人), fermented soybean, chongbaek, Wubanggeun(牛蒡根), soy beans(大豆), grass(椒), xanthium fruit(蒼耳子), changi leaves(蒼耳葉), jinpi(陳皮), black pepper(胡椒), ginger(生薑), mint leaves(薄荷葉), suyu, heukjima(黑脂麻), ojagye, chives, and Baekyuma(白油麻). Conclusions : The food ingredients extracted from Sikuisimgam, Eumsunjungyo Shikyojaebyeong, and Singnyochanyo are effective in curing wind diseases, and they should be processed in ways that enable the people of this age to consume more of them. Moreover, people who have not yet suffered from wind diseases but are showing the symptoms of wind diseases will benefit from taking care of their blood pressure by consuming these foods in their everyday lives. Such people will serve as examples of good food cure recipes.

• 한국광학회지
• /
• 제6권4호
• /
• pp.310-316
• /
• 1995

유한영역에서의 조화함수전개법으로 인접한 두 도파로 코어 중심간의 거리 및 도파로 변수에 따른 결합길이를 계산하여 $1.3/1.55\mum$ WDM coupler을 설계하였다. 저압화학기상증착법에 의해 PSG 도파박막을 제작하고 laser lithography와 $CF_4/O_2$ RIE 공정 등을 이용하여 WDM coupler를 제작하였다. 또한 광섬유를 지지 및 고정하기 위하여 Si 기판 위에 V-groove를 만들었으며 제작된 WDM coupler와 V-groove로 지지된 광섬유를 UV curing epoxy를 사용하여 접속하였다. 제작된 WDM coupler의 $1.3.\mum$, $1.55\mum$에서의 분지별 도파모드를 관측하고 분할비를 측정한 결과 최대 분할비는 각각 9dB, 12dB였다.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.739-748
• /
• 2014

In this article, by using experimental studies and artificial neural network has been tried to investigate the use of nano-silica as concrete admixture to reduce alkali-silica reaction. If there are reactive aggregates and alkali of cement with enough moisture in concrete, a gel will be formed. Then with high reactivity between alkali of cement and existence of silica in aggregates, this gel will expand by absorption of water, and causes expansive pressure and cracks be formed. At the time passes, this gel will reduce both durability and strength of the concrete. By reducing the size of silicate to nano, specific surface area of particles and number of atoms on the surface will be increased, which causes more pozzolanic activity of them. Nano-silica can react with calcium hydroxide ($Ca(OH)_2$) and produces C-S-H gel. In this study, accelerated mortar bar specimens according to ASTM C 1260 and ASTM C 1567, with different mix proportions were prepared using aggregates of Kerman, such as: none admixture and plasticizer, different proportions of nano-silica separately. By opening the moulds after 24 hour and curing in water at $80^{\circ}C$ for 24 hour, then curing in (1N NaOH) at $80^{\circ}C$ for 14 days, length expansion of mortar bars were measured and compared. It was noted that, the lowest length expansion of a specimens shows the best proportion of admixture based on alkali-silica reactivity. Then, prediction of alkali-silica reaction of concrete has been investigated by using artificial neural network. In this study the backpropagation network has been used and compared with different algorithms to train network. Finally, the best amount of nano silica for adding to mix proportion, also the best algorithm and number of neurons in hidden layer of artificial neural network have been offered.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.282-289
• /
• 2004

We have extensively characterized the fluorescence behavior of unsaturated polyester (UP) resin in the absence and presence of a 1,3-bis-(l-pyrenyl)propane (BPP) fluorescent probe at various dynamic and isothermal cure histories by means of a steady-state fluorescence technique using a front-face illumination equipment. In addition, we explored the effect of the fluorescence intensity on the relaxation of the fluorescent probe in the UP resin by resting the dynamically and isothermally cured resin at ambient temperature and pressure for 24 h. The monomer fluorescence intensity, which has two characteristic peaks at 376 and 396nm, changed noticeably depending on the cure temperature and time and provided important information with respect to the molecular and photophysical responses upon curing. The result of the fluorescence study indicates that the increased local viscosity and restricted molecular mobility of the UP resin surrounding the BPP probe after curing are both responsible for the enhancement of the monomer fluorescence intensity. Our results also demonstrate that once the BPP probe has enough time to rearrange and become isolated prior to fluorescence, a sufficient amount of fluorescence is emitted. Therefore, we note that the fluorescence behavior of this UP resin system is influenced strongly by the relaxation process of the fluorescent probe in the resin as well as process used to cure the resin.

• Composites Research
• /
• 제34권5호
• /
• pp.269-276
• /
• 2021

프리프레그 압축성형(PCM, Prepreg Compression Molding) 공정은 고품질 CFRP(Carbon Fiber Reinforced Plastic) 제품을 제조할 수 있는 고속성형기술이다. 오토클레이브 공정에 비해 폐기물 발생이 적고 사이클타임을 크게 줄일 수 있어 항공우주 및 자동차 산업에서 다양한 연구가 진행되고 있다. 본 연구에서는 PCM 공정의 품질을 높이기 위해 프리프레그의 경화거동을 따라 프레스의 압축압력을 단계별로 증가시키는 성형법에 대해 연구하였고, 이러한 다단 압축 성형법이 우수한 품질의 CFRP 제품을 생산하고 사이클타임을 단축할 수 있는 좋은 수단임을 확인하였다. 그리고 상온에서 적층한 프리프레그를 금형에 투입하여 예열과 성형을 동시에 함으로써 별도의 예열 공정 없이 제품을 성형할 수 있었다. 또한 평판 성형에 최적화된 공정조건을 3차원 형상물에 동일하게 적용한 결과 외관상 평판과 유사한 제품을 공정조건 수립 과정 없이 만들 수 있었다.

• Composites Research
• /
• 제20권2호
• /
• pp.10-16
• /
• 2007

본 연구에서는 고분자 전해질 연료전지(PEMFC)용 복합소재 분리판의 제작을 위해, 예비성형과 스탬핑 공정으로 이루어지는 2단계 제조공법을 개발하고 예비성형 조건이 소재의 물성에 미치는 영향을 고찰하였다. 예비성형체는 팽창흑연, 흑연분말, 페놀수지를 이용하여 제조되었으며, 예비성형 공정은 전기 전도도, 굽힘 강도와 미세 구조의 분석을 통해 최적화되었다. 예비성형은 페놀수지의 지나친 경화를 막기 위해 페놀 분말의 녹는점인 $90^{\circ}C$보다 약간 높은 $100^{\circ}C$에서 이루어졌다. 본 연구에서 개발된 예비성형체는 팽창흑연의 서로 잘 얽히는 성질로 인해 0.07-0.28MPa의 낮은 압력에서도 쉽게 제조되었다. 부족하거나 과도한 예비경화는 복합소재 분리판의 강도 저하를 야기하기 때문에, 예비성형체를 안정적으로 제조하기 위한 예비성형 시간은 5분으로 결정되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.125-126
• /
• 2021

In order to improve the housing culture, construction changes for the utilization of diverse and multifunctional spaces are appearing in response to the increasing diverse needs of consumers. Cellular Light-weight Concrete (CLC) is being developed for use in fire-resistant heat-insulating walls and non-bearing walls. However, manufacturing non-uniformity has become a problem as a drawback due to the use of foamed bubbles and normal temperature curing, and additional research is required. Therefore, in order to suppress cracks due to drying shrinkage, silica sand is mixed with CLC to try to understand its characteristics. In the experiment, the compressive strength from 7 to 28 days of age was measured via a constant temperature and humidity chamber, and the drying shrinkage was analyzed according to each condition using a strain gauge. The compressive strength of matrix tends to decrease as the substitution rate of silica sand increases. This is judged by the result derived from the fact that the specific surface area of silica sand is smaller than that of slag. Based on KS F 2701 (ALC block), the compressive strength of 0.6 products is 4.9 MPa or more as a guide, so the maximum replacement rate of silica sand that satisfies this can be seen at 60%. Looking at the change in drying shrinkage for just 7 days, the shrinkage due to temperature change and drying is 0.7 mm, and the possibility of cracking due to shrinkage can be seen, and it seems that continuous improvement and supplementation are needed in the future.

• 폴리머
• /
• 제24권4호
• /
• pp.529-537
• /
• 2000

본 연구에서는 압출된 PP sheets를 각기 다른 조사량으로 조사 가교시켜, 겔 분율 차이에 따른 세 종류의 샘플을 만든 다음, 회분식 공정을 통해 초임계 유체 (supercritical fluid) 상태의 $CO_2$를 발포제로 사용하여 발포시켰다. 이때, 겔 분율의 차이 및 고압 반응기 내에서 충진 압력과 충진 시간이 셀 구조에 미치는 영향을 관찰하였다. 다음으로, 발포조건에 따른 셀 구조 변화를 알아보기 위해 발포온도와 발포시간을 변화시키면서 실험하였다. 고분자 샘플 내로 침투한 가스의 양은 겔 분율의 차이에 의한 변화가 거의 없었으며, 충진 압력이 2000 psi 이상일 경우 충진 압력의 영향에도 큰 영향을 받지 않았다. 겔 분율이 낮은 샘플은 발포온도나, 발포시간이 증가함에 따라 셀 크기가 불균일하게 증가하였으나, 겔 분율이 높은 샘플은 높은 발포온도와 발포시간에서도 균일하게 셀 크기를 유지하며 안정한 구조를 나타내었다.