• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.49-55
• /
• 2002

광섬유 브래그 격자/외부 패브리-페로 간섭 (FBG/EFPI) 센서를 이용하여 비대칭 적층판의 성형시 및 성형후 변형률과 온도를 동시에 모니터링 하였따. 본 논문에서는 광섬유 센서의 출력에 대한 변형률 및 온도의 관계를 수치적으로 유도하였으며 이를 통해 센서의 특성 행렬을 구하였다. 따라서 각각의 센서에 대해 특성 행렬을 구하기 위해 센서의 보정실험을 수행할 필요가 없다. 광원으로는 파장 이동 광섬유 레이저를 사용하였다. 두 개의 FBG/EFPI 센서를 Gr/Ep 비대칭 직교적층 복합적층판에 방향과 위치를 달리하여 삽입하고 오토클레이브 내에서 성형하는 동안 두 지점에서의 성형변형률과 온도를 실시간으로 모니터링 하였다. 또한 열챔버 내에서 제작된 적층판의 열변형률과 온도를 측정하였다. 이러한 실험들을 통해 복합재료의 효울적인 스마트 프로세싱에 대한 기초를 마련할 수 있으며 비대칭 직교적층 복합적층판의 열적 거동에 대해 알 수 있을 것이다.

• 폴리머
• /
• 제37권2호
• /
• pp.240-248
• /
• 2013

본 연구에서는 DGEBA(diglycidyl ether of bisphenol A)를 사용한 에폭시/mercaptan 경화제의 경화 반응 거동을 에폭시/아민 유도체형 경화제와 비교하여 연구하였다. 경화 반응 거동은 DSC 분석에 의해 승온 및 등온의 조건에서 경화되는 과정을 연구하였다. DSC의 승온 실험에서는 Kissinger 법을 이용하였으며, 등온 실험에서는 Kamal의 속도모델을 이용하여 분석하였다. 결과적으로 활성화 에너지는 아민 유도체형 경화제를 사용하였을 때 약 40 kcal/mol이고, mercaptan 경화제를 사용하였을 때 약 28에서 19 kcal/mol로 -SH 관능기가 증가할수록 감소하였다. 에폭시/아민 유도체형 경화제는 약 $90^{\circ}C$ 이상에서 경화 반응이 개시되는 반면, 에폭시/mercaptan 경화제에서는 경화 반응 개시 온도가 약 $80^{\circ}C$ 이내로 낮아지고, 반응 속도가 상승하여 반응 시간이 10분 이내로 단축되었다. 또한 에폭시/mercaptan 경화제계는 자기 촉매 반응 모델을 따르는 것을 확인하였고 약 20~40%의 경화도에서 최대 반응속도를 나타내었다.

• 폴리머
• /
• 제37권1호
• /
• pp.121-126
• /
• 2013

4,4'-Thiodibenzenethiol을 기반으로 이관능 에폭시 수지인 4,4'-thiodibenzenethiol diglycidyl ether를 직접합성법으로 합성하였다. 합성된 에폭시 수지가 광경화가 가능하도록 acrylic acid와 반응시켜 광경화형 고굴절 이관능 에폭시 아크릴레이트인 4,4'-thiodibenzenethiol diglycidyl ether diacrylate를 합성하였으며 $^1H$ NMR과 FTIR을 이용하여 화학구조를 확인하였다. 이관능 에폭시 아크릴레이트와 함께 반응성 희석제인 2-phenoxythiol ethyl acrylate를 5, 10, 15, 20, 30 wt% 희석하여 점도와 굴절률과의 상관관계를 확인하였으며 광경화 후 경화필름의 굴절률 변화를 고찰 하였다. 반응성 희석제의 농도가 증가함에 따라 경화물의 경화도가 낮아졌으며, 경화도가 클수록 경화 후 굴절률은 높아지는 경향을 확인하였다.

• Composites Research
• /
• 제15권2호
• /
• pp.40-47
• /
• 2002

이관능성 에폭시 수지인 DGEBA와 DGEBF를 양이온 촉매인 BQH를 사용하여 전자선(electron-beam) 경화 기술에 의해 경화하였다. 그리고 수지의 구조적 차이가 열안정성과 경화동력학에 미치는 영향을 연구하였다. 실험적 결과에 의하면, Horowitz-Metzger 법에 의한 분해 활성화 에너지는 DGEBA의 경우가 높았지만 적분 열분해 온도(IPDT)는 DGEBA가 DGEBF 보다 낮았다. 이것은 DGEBF 주사슬의 수소 결합으로 인해 가교밀도가 높아졌기 때문인 것으로 사료되며, 근적외선 분광기(NIRS)를 사용하여 $5235\;cm^{-1}$와 $7000\;cm^{-1}$에서의 hydroxyl band의 증가로 확인하였다.

• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.347-352
• /
• 2017

Pain, an adaptive but unpleasant sensation, is the most common symptom of numerous diseases in humans and animals. Although animal patients express this symptom frequently, a lack of communication abilities hinders its recognition by veterinary physicians, thereby leading to unsatisfactory management of the symptom. On the other hand, pain itself has its own neurological mechanisms, regardless of the disease that causes it. Thus, a physician may need to know the mechanisms underlying pain development in order to properly manage the symptom in a particular disease. In this review, we attempt to provide a brief introduction to the anatomical, physiological, and neurological basis of pain transmission and sensation. Although most knowledge about these mechanisms comes from studies in humans and laboratory animals, it is generally applicable to pet, farm, or zoo animals. In addition, we summarize pain behavior in several pet, farm, and laboratory animals for its proper identification. This information will help to identify and manage pain, and thus improve welfare, in animals.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.339-346
• /
• 2007

The influence of adding urea to phenol-formaldehyde (PF) resins as a co-polymer component were investigated aiming at synthesizing useful phenol-urea-formaldehyde resins. Urea was added at 10% by total resin weight. Several methods for the addition of urea to the PF resins during synthesizing resins to see the co-polymerization occurs between urea and PF resins. The urea was added at the beginning, at three different middle stages, and at the end of PF resin synthesis. The copolymerized methylene bridges between phenol and urea molecules were not observed by $^{13}C-NMR;$ no signal around 50ppm. The curing of urea-modified PF resins, evaluated by dynamic mechanical analysis(DMA), showed some differences among the resins. DMA gel times ranged from 2.75 min to 3.25 min and the resins made with earlier urea additions showed slightly shorter gel times. The longest cure time and gelation time was observed for the resin PFU. Catalyst effects on the DMA cure time values of resins were not significant with different amounts of catalyst or different types of catalyst for all resins tested. Gel times of urea-modified PF resins shortened the most by triacetin catalyst.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.478-483
• /
• 2004

Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB)] as self-healing agents for polymeric composites were microencapsuled by in situ polymerization of urea and formaldehyde. We obtained plots of the storage modulus (G') and tan $\delta$ as a function of cure time by using dynamic mechanical analysis to investigate the cure behavior of the unreacted self-healing agent mixture in the presence of a catalyst. Glass transition temperatures (T$\_$g/) and exothermic reactions of samples cured for 5 and 120 min in the presence of different amounts of the catalyst were analyzed by differential scanning calorimetry. Of the two dienes, ENB may have advantages as a self-healing agent because, when cured under same conditions as DCPD, it reacts much faster in the presence of a much lower amount of catalyst, has no melting point, and produces a resin that has a higher value of T$\_$g/. Microcapsules containing the healing agent were successfully formed from both of the diene monomers and were characterized by thermogravimetric analysis. Optical microscopy and a particle size analyzer were employed to observe the morphology and size distribution, respectively, of the microcapsules. The microcapsules exhibited similar thermal properties as well as particle shapes and sizes.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.334-338
• /
• 2009

Trifunctional epoxy resin triglycidyl paraaminophenol (TGPAP)/$CaCO_3$ nanocomposites were prepared using the melt blending method. The effects of nano-$CaCO_3$ content on the thermal behaviors, such as cure behavior, glass transition temperature ($T_g$), thermal stability, and the coefficient of thermal extension (CTE), were investigated by several techniques. Differential scanning calorimetry (DSC) results indicated that the cure reaction of the TGPAP epoxy resin was accelerated with the addition of nano-$CaCO_3$. When the nano-$CaCO_3$ content was increased, the $T_g$ of the TGPAP/$CaCO_3$ nanocomposites did not obviously change, whereas the crosslinking density was linearly increased. The nanocomposites showed a higher thermal stability than that of the neat epoxy resin. This result could be attributed to the increased surface contact area between the nano-$CaCO_3$ particles and the epoxy matrix, as well as the high crosslinking density in the TGPAP/$CaCO_3$ nanocomposites. The CTE of the nanocomposites in the rubbery region was significantly decreased as the nano-$CaCO_3$ content was increased.

• Carbon letters
• /
• 제27권
• /
• pp.72-80
• /
• 2018

In the present work, a comparative study of the mechanical behavior of two series of elastomeric composites, based on carboxylated styrene butadiene rubber (X-SBR) and reinforced with rice bran carbon (RBC) and graphite, is reported. Hybrid composites of X-SBR filled with RBC-graphite were also investigated in terms of the cure characteristics, hardness, tensile properties, abrasion resistance, and swelling. It was observed that the cure times decreased with the incorporation of a carbon filler whereas the torque difference, tensile strength, tensile modulus, hardness, and swelling resistance increased compared to the neat X-SBR revealing a favorable characteristic of crosslinking. Dynamic rheological analysis showed that the G' values of the composites, upon the addition of RBC-graphite, were changed to some extent. This demonstrates that the presence of a strongly developed network of fillers will ensure a reinforcing characteristic in a polymer matrix.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.34-41
• /
• 2024

In this study, the effects of the type and content of silica on the mechanical and tear properties of chloroprene rubber (CR), which is mainly used as a jacket material for mining cables, were studied. The crosslinking density (ΔM) and reinforcing factor (α_f) defined using cure characteristics increased with increasing silica content, whereas the cure rate decreased. The hardness, tensile strength, and modulus of the CR compounds increased depending on the silica content and structural development. The reinforcing behavior of the silica-filled CR compounds according to the silica type and content showed the best fit with the Thomas equation of the predictive model. Tear strength was evaluated using two standard test methods, ASTM D470 and DIN VDE 0472-613, and the results were compared. The tear strength increased as the silica content increased, regardless of the test method, and the different tear strengths obtained by the two standard test methods showed a linear relationship with each other, indicating a high correlation.