• Journal of Adhesion and Interface
• /
• v.4 no.3
• /
• pp.33-40
• /
• 2003

In this work, diglycidyl ether of bisphenol A (DGEBA)/polyetherimide (PEI) blends were cured using 4,4-diaminodiphenyl methane (DDM). And the effects of addition of different PEI contents to neat DGEBA were investigated in the thermal properties and fracture toughness of the blends. The contents of contents of containing PEI were varied in 0, 2.5, 5, 7.5, and 10 phr. The cure activation energies ($E_a$) of the cured specimens were determined by Kissinger equation and the mechanical interfacial properties of the specimens were performed by critical stress intensity factor ($K_{IC}$). Also their surfaces were examined by using a scanning electron microscope (SEM) and the surface energetics of blends was determined by contact angles. As a result, $E_a$ and $K_{IC}$ showed maximum values in the 7.5 phr PEI. This result was interpreted in the increment of the network structure of DGEBA/PEI blends. Also, the surface energetics of the DGEBA/PEI blends showed a similar behavior with the results of $K_{IC}$. This was probably due to the improving of specific or polor component of the surface free energy of DGEBA/PEI blends, resulting in increasing the hydrogen bonding of the hydroxyl and imide groups of the blends.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.230.2-230.2
• /
• 2015

Nanoparticles of magnesium ferrite are used as a heterogeneous catalyst, humidity sensor, oxygen sensor and cure of local hyperthermia. These applications usually utilize the magnetic behavior of these nanoparticles. Moreover, magnetic properties of nanoferrites exhibit rather complex behavior compared to bulk ferrite. The magnetic properties of ferrites are complicated by spins at vortices, surface spins. Reports till date indicate strong dependency on the structural parameters, oxidation state of metal ions and their presence in octahedral and tetrahedral environment. Thus we have carried out investigation on magnesium ferrite nanoparticles in order to study coordination, oxidation state and structural distortion. For present work, magnesium ferrite nanoparticles were synthesized using nitrates of metal ions and citric acid. Fe L-edge spectra measured for these nanoparticles shows attributes of $Fe^{3+}$ in high spin state. Moreover O K-edge spectra for these nanoparticles exhibit spectral features that arises due to unoccupied states of O 2p character hybridized with metal ions. Mg K-edge spectra shows spectral features at 1304, 1307, 1311 and 1324 eV for nanoparticles obtained after annealing at 400, 500, 600, 800, 1000, and $1200^{\circ}C$. Apart from this, spectra for precursor and nanoparticles obtained at $300^{\circ}C$ exhibit a broad peak centered around 1305 eV. A shoulde rlike structure is present at 1301 eV in spectra for precursor. This feature does not appear after annealing. After annealing a small kink appear at ~1297 eV in Mg K-edge spectra for all nanoparticles. This indicates changes in local electronic structure during annealing of precursor. Observed behavior of change in local electronic structure will be discussed on the basis of existing theories.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.7
• /
• pp.4005-4013
• /
• 2013

Background: Although breast cancer is a major public health worry among Asian women, adherence to screening for the disease remains an obstacle to its prevention. A variety of psycho-social and cultural factors predispose women to delay or avoidance of screening for breast cancer symptoms at the early stages when cure is most likely to be successful. Yet few interventions implemented to date to address this condition in this region have drawn on health behavior theory. Materials and Methods: This paper reviews the existing literature on several cognitive theories and models associated with breast cancer screening, with an emphasis on the work that has been done in relation to Asian women. To conduct this review, a number of electronic databases were searched with context-appropriate inclusion criteria. Results: Little empirical work was found that specifically addressed the applicability of health theories in promoting adherence to the current breast cancer prevention programs Among Asian women. However, a few studies were found that addressed individual cognitive factors that are likely to encourage women's motivation to protect themselves against breast cancer in this region of the world. The findings suggest that multi-level, socio-cultural interventions that focus on cognitive factors have much promise with this issue. Conclusions: Interventions are needed that effectively and efficiently target the personal motivation of at-risk Asian women to seek out and engage in breast cancer prevention. Concerning implications, personal motivation to seek out and engage in individual preventive actions for breast cancer prevention among Asian women is a timely, high priority target with practical implications for community development and health promotion. Further studies using qualitative, anthropologic approaches shaped for implementation in multi-ethnic Asian settings are needed to inform and guide these interventions.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.32 no.4
• /
• pp.154-160
• /
• 2021

Objectives: This study identified the association between excessive exposure to screen media and behavioral and emotional problems in elementary school students. Methods: A total of 331 parents of children aged 7-10 years were recruited from "The Kids Cohort for Understanding of Internet Addiction Risk Factors in Early Childhood (K-CURE)" study. Children's demographics, household media ownership, screen time, and behavioral/emotional problems were assessed using a parental questionnaire. Children's behavior/emotional problems were measured using the Korean version the of Child Behavior Checklist (K-CBCL) score. Results: The total K-CBCL score in the screen overuse group was 51.18±9.55, significantly higher than 47.28±10.09 in the control group (t=2.14, p=0.05). For each subscale, the externalization score (51.65±10.14, 48.33±8.97, respectively; t=2.02, p<0.05), social problem score (55.41±6.11, 53.24±5.19, respectively; t=2.27, p<0.05), and rule breaking behavior score (55.71±6.11, 53.24±5.19, respectively; t=2.27, p<0.05) were significantly higher in the screen overuse group than in the control group. In addition, the screen overuse group also had a significantly higher usage rate than the control group, even if limited to smartphones, not only on weekdays (3.56±2.08, 1.87±2.02, respectively; t=-4.597, p<0.001) but also weekends (1.62±0.74, 1.19±0.83, respectively; t=-3.14, p=0.003). Conclusion: The study suggested that screen media overuse patterns in children in Korea are particularly relevant to the excessive use of smartphones and are related to higher risks of emotional and behavioral problems.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.41-56
• /
• 1989

The purpose of this study was to examine the effect of temperature dependence of the behavior on the physical properties of posterior composite resins. Three light cure posterior composite resins (Heliomolar, Litefil-P, and P-50) and one chemical cure posterior composite resin (Bisfil-II) were used as experimental materials. Composite resin was placed in a cylindrical brass mold (2.5 mm high and 6.5 mm inside diameter) that was rested on a glass plate. Another flat glass was placed on top of the mold, and the plate was tightly clamped together. After the mold had been filled with the light cure composite material, the top surface was cured for 30 seconds with a light source. Chemical cure resin specimens were made in the same manner as above. Three hundreds and twenty composite resin specimens were constructed from the four composite materials. One hundred and sixty specimens of them were placed in a heater at $50^{\circ}C$, $75^{\circ}C$, $100^{\circ}C$, $125^{\circ}C$, $150^{\circ}C$, $175^{\circ}C$ and $200^{\circ}C$ for 5 minutes or 10 minutes respectively before compressive strengths were measured. Another one hundred and sixty specimens were tested for the diametral tensile strengths in the same way as above. They were randomly divided into eight groups according to the mode of heating methods as follows and stored in distilled water at $37^{\circ}C$ for 24 hours. Group $37^{\circ}C$ - specimens were stored at $37^{\circ}C$ in distilled water for 24 hours. Group $50^{\circ}C$ - specimens were heated at $50^{\circ}C$ after curing. Group $75^{\circ}C$ - specimens were heated at $75^{\circ}C$ after curing. Group $100^{\circ}C$ - specimens were heated at $100^{\circ}C$ after curing. Group $125^{\circ}C$ - specimens were heated at $125^{\circ}C$ after curing. Group $150^{\circ}C$ - specimens were heated at $150^{\circ}C$ after curing. Group $175^{\circ}C$ - specimens were heated at $175^{\circ}C$ after curing. Group $200^{\circ}C$ - specimens were heated at $200^{\circ}C$ after curing. Twenty specimens of each of four composite resins were respectively made by insertion of materials into same mold for examining the dimensional changes between before and after heating. The final eighty specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before testing the dimensional changes. Compressive and diametral tensile strengths were measured crosshead speed 1mm/minute and 500Kg in full scale with a mechanical testing machine (DLC 500 Type, Shimadzu Co., Japan). Dimensional changes were determined by measuring the diametral changes of eighty specimens with micrometer (Mitutoyo Co., Japan). Results were as follows: 1. Diametral tensile strengths of specimens in all groups were increased with time heated compared with control group except for that in group $50^{\circ}C$ and the maximum diametral tensile strength was appeared in the specimen of Litefil-P heated for 10 minutes at $100^{\circ}C$. In heliomolar and P-50, it could be seen in the specimen heated for 10 minutes at $150^{\circ}C$, but in Bisfil-II, it could be found in the specimen heated for 5 minutes at $150^{\circ}C$. 2. Compressive strengths of specimens in all groups was tended to be also increased with time heated but that in group $50^{\circ}C$ and the maximum compressive strengths were showed in the same specimens conditioned as the diametral tensile strengths of four composite materials tested. 3. In Heliomolar, Litefil-P, and Bisfil-II, it was decreased in diameters of resin specimens between before heating and increased in diameters of resin specimens after storing in distilled water, but it was not in P-50. 4. There is little difference in diametral tensile strengths, compressive strengths, and dimensional changes followed by heating the resin specimens for 5 minutes and 10 minutes, but there is no statistical significances.

• Journal of Oriental Neuropsychiatry
• /
• v.27 no.2
• /
• pp.43-55
• /
• 2016

Objectives The aim of this systemic review was to summarize medical records of Korean medicine based psychotherapy and investigate its therapeutic mechanism.Methods We searched articles on Korean neuropsychiatry in Korean databases. Subsequently, we selected and analyzed medical records on Korean medicine based-psychotherapy that met inclusion criteria.Results Fifty-five medical records were included. They were classified into the following 5 categories. Five minds mutual restriction therapy in 19 medical records; counseling and persuading therapy in 12 medical records; moving essence and changing Qi therapy in 10 medical records; Kyungjapyungji psychotherapy in 2 medical records; and suggestion psychotherapy in 11 medical records.Conclusions The results indicated that emotion is mainly used for cure. Buddhism affects Korean medicine based psychotherapy. Korean medicine based psychotherapy corresponds to western psychotherapy such as short-term dynamic psychotherapy (STDP), supportive psychotherapy, cognitive therapy, behavior therapy, and guided imagery.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.180-189
• /
• 2018

To study the effect of stereoisomeric structures of curing agents on curing behaviors, thermal and mechanical properties of epoxy resins, DGEBA(diglycidyl ether of bisphenol A) epoxy resin and 3,3'- and 4,4'-DDS(diaminodiphenyl sulfone) curing agents were selected. The curing initiation temperature and activation energy of DGEBA/3,3'-DDS was lower than DGEBA/4,4'-DDS. DGEBA/3,3'-DDS has a faster curing rate and higher degree of cure than DGEBA/4,4'-DDS, suggesting that 3,3'-DDS has higher reactivity than 4,4'-DDS. Tensile strength and fracture toughness of DGEBA/3,3'-DDS was lower than those of DGEBA/4,4'-DDS, indicating that mechanical properties of the epoxy resin can be different only by the stereoisomeric difference in chemical structure of the curing agent.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.165-173
• /
• 2008

Multiple particle tracking microrheology is used to characterize the viscoelastic properties of biomaterial and synthetic polymer gels near the liquid-solid transition. Probe particles are dispersed in the gel precursors, and their dynamics are measured as a function of the extent of reaction during gel formation. We interpret the dynamics using the generalized Stokes-Einstein relationship (GSER), using a form of the GSER that emphasizes the relationship between the probe particle mean-squared displacement and the material creep compliance. We show that long-standing concepts in gel bulk rheology are applicable to microrheological data, including time-cure superposition to identify the gel point and critical scaling exponents, and the power-law behavior of incipient network's viscoelastic response. These experiments provide valuable insight into the rheology, structure, and kinetics of gelling materials, and are especially powerful for studying the weak incipient networks of dilute gelators, as well as scarce materials, due to the small sample size requirements and rapid data acquisition.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.22-26
• /
• 1998

The medicinal plants have been used as drugs for thousands of years and many of them are used in traditional medicines. How long are these medicinal plants used as drugs\ulcorner Ebers papyrus (BC 1550) is one of the oldest documents which described more than 700 kinds of herbal drugs. Some of herbal medicines described in the papyrus are familiar and ‘Opium’ is a good example. Some of the drugs described in the papyrus are hardly recognized as drugs by the standard of present day. We can trace back the history of medicinal plants from quite different approach. The investigations on group behavior of chimpanzees in Africa by ‘The Primate Institute of Kyoto University’ has revealed that chimpanzees suffered illness take specific plants which are not taken as daily food stuff. The chemical analysis clarified that the plants contain very bitter constituents and suggested that chimpanzees take medicinal plants to cure their illness. It is worth to note that young chimpanzees just learn what elder ones take when they suffer illness, but elders never teach to their children! It is no doubt that the chimpanzee's medicinal plants were found by random, and try and error screening. The medicinal plants found in this study have been used as herbal medicines by the peoples in the region.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.80-87
• /
• 2002

A comparative study using electron-beam(EB) and thermal curing techniques was carried out to determine the effect of cure behavior and thermal stability of epoxy resins. In this work, benzylquinoxalinium hexafluoroantimonate(BQH) was used as a latent cationic catalyst for an epoxy resin. According to the thermogravimetric analysis(TGA), the decomposed activation energy based on Coats-Redfern method was higher in the case of thermal curing technique. This could be interpreted in terms of slow thermal diffusion rate resulted from high crosslink density of the thermally cured epoxy resin. However, the increase of hydroxyl group in the epoxy resin cured by EB technique was observed in near-infrared spectroscopy(NIRS) measurements, resulting in improving the stable short aromatic chain structure, integral procedural decomposition temperature, and finally ductile properties for high impact strengths.